• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Material: Rubber/Metal
• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 48, 28
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Lower, Front Axle Right
• for OE number: 1K0 407 182
• Manufacturer: GSP AUTOMOTIVE

• Fitting Position: Front Axle, Front
• Total Length [mm]: 54
• Outer Diameter [mm]: 48
• Inner Diameter [mm]: 12
• Name: COC 80005079
• Manufacturer: CORTECO

• Fitting Position: Rear Axle Left, Centre, Rear Axle Right
• for OE number: 1K0 505 541 B
• Manufacturer: GSP ZAWIESZENIE

• Control/Trailing Arm Type: for control arm
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Left, Right, Front Axle
• Required quantity: 2
• Material: Rubber/Metal
• Control/Trailing Arm Type: for control arm
• Weight [g]: 242
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 39
• Overall Length [mm]: 54
• Name: IM 1620
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle, Lower, Front
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Height [mm]: 54
• Name: ALT 81191AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle, inner, in front of axle
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 40
• Thickness 1 [mm]: 53
• Manufacturer: DELPHI
• Name: DE TD521W

• Fitting Position: Front Axle, Front, Lower
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• for OE number: 5Q0407182A
• Manufacturer: SASIC
• Additional information: 9001759
• Lisainfo: 9001759

• Fitting Position: Front Axle, Centre
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Height [mm]: 54
• Outer Diameter [mm]: 40
• Inner Diameter [mm]: 12
• Material: Rubber/Metal
• Weight [kg]: 0.18
• Name: DY 37-06068-6
• Manufacturer: DYS

• Fitting Position: Front Axle Left, Front Axle Right, Lower, Front
• Width [mm]: 40
• Height [mm]: 54
• Inner Diameter [mm]: 12
• Manufacturer: FAST

• Axle: Multi-link Axle
• for PR number: 0N4
• Inner Diameter 1 [mm]: 49
• Outer Diameter 1 [mm]: 12
• Thickness 1 [mm]: 38
• Manufacturer: DELPHI
• Name: DE TD1058W

Fitting Position: Rear Axle, outer, Steering Knuckle, wheel suspension, Lower

• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 48, 28
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Front, Front Axle Right
• Weight [kg]: 0.183
• Observe service information:
• Name: Puks - K„„ndmik VW P. GOLF5/JETT3/
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, Rear Axle Right, Centre
• Material: Rubber/Metal
• Thickness [mm]: 64
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 60
• Manufacturer: MERTZ

• for OE number: 5Q0407182A
• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Name: DA DSS1079
• Manufacturer: DAYCO

• Axle: Multi-link Axle
• for PR number: 0N4
• Height 1 [mm]: 50
• Height 2 [mm]: 28
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 37
• Manufacturer: KAVO

Fitting Position: Rear Axle, outer, Steering Knuckle, wheel suspension, Lower

• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 48, 28
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Front, Front Axle Right
• Weight [kg]: 0.187
• Observe service information:
• Name: SW 30 92 4390
• Manufacturer: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• SVHC: No SVHC present!
• Name: Puks
• Manufacturer: FAG

• Thickness [mm]: 64
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 60
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Centre, Rear Axle Right
• Weight [kg]: 0.18
• Name: Puks
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, both sides
• Control/Trailing Arm Type: for trailing arm
• Quantity per axle: 2
• Article number of recommended accessories: 38906 01, 43359 01, 44089 01
• Observe service information:
• Name: Puks - K„„ndmik VW T. A3 04-/GOLF5
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle, inner, Left, Upper, Right
• Material: Metal
• Control/Trailing Arm Type: for control arm
• Weight [g]: 93
• Length 1 [mm]: 23
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 39
• Overall Length [mm]: 39
• Name: IM 1619
• Manufacturer: ORIGINAL IMPERIUM

• Thickness [mm]: 45
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 38.3, 24
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Upper, outer, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.125
• Name: Puks - K„„ndmik VW T. A3 04-/GOLF5
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Rear, Lower
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 65
• for OE number: 5Q0407183K
• Manufacturer: SASIC

• Thickness [mm]: 45
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38, 24
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Upper, inner, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.071
• Name: Puks - K„„ndmik VW T. A3 04-/GOLF5
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, Upper, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Height [mm]: 45
• Name: ALT 88666AL
• Manufacturer: ALTE AUTOMOTIVE

• Thickness [mm]: 45
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 38.3, 24
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Upper, outer, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.06
• Name: SW 30 92 9682
• Manufacturer: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, Front
• Axle: Multi-link Axle
• for PR number: 0N4
• Height 1 [mm]: 63.8
• Height 2 [mm]: 44.5
• Inner Diameter [mm]: 12.3
• Outer Diameter [mm]: 60.3
• Manufacturer: KAVO

• Fitting Position: Rear Axle, Upper
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 60
• for OE number: 5Q0505541A
• Manufacturer: SASIC

• Fitting Position: Upper, Rear Axle Left, Rear Axle Right
• Material: Rubber/Metal
• Thickness [mm]: 45
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 24, 38
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
A.A3/VW GOLF/OCTAVIA
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
A.A3/VW GOLF/OCTAVIA
(kvaliteediklass: PJ)"

• Thickness [mm]: 45
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38, 24
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Upper, inner, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.06
• Name: SW 30 92 9689
• Manufacturer: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, Lower, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 60
• Height [mm]: 64
• Name: ALT 91581AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle, both sides, Front
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Name: Puks - K„„ndmik VW P. GOLF7/A3 12-
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear, Left, Right, Front Axle
• Weight [g]: 351
• Outer Diameter 2 [mm]: 65
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 30
• Length [mm]: 50
• Name: IM 1308
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Rear Axle, Upper, both sides, outer
• Control/Trailing Arm Type: for control arm
• Quantity per axle: 2
• Article number of recommended accessories: 38910 01
• Observe service information:
• Name: Puks - K„„ndmik VW T. A3 04-/GOLF5
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, outer
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Material: Rubber/Metal
• Weight [kg]: 0.3
• Name: DY 37-06184-5
• Manufacturer: DYS

• Fitting Position: Rear Axle, Upper, both sides, inner
• Control/Trailing Arm Type: for control arm
• Quantity per axle: 2
• Article number of recommended accessories: 38910 01
• Observe service information:
• Name: Puks - K„„ndmik VW T. A3 04-/GOLF5
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle, outer, Lower
• Axle: Multi-link Axle
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 37.4
• Width 1 [mm]: 50
• Width 2 [mm]: 28
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 829064010

• Weight [kg]: 0.074
• Fitting Position: Rear Axle both sides, Upper, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 38.1
• Length [mm]: 45
• Manufacturer: RTS

• Weight [kg]: 0.13
• Fitting Position: Rear Axle both sides, Upper, outer
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 38
• Length [mm]: 45
• Manufacturer: RTS

• Length [mm]: 49
• Width [mm]: 37
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 37
• Fitting Position: Rear Axle Left, outer, Lower, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.13
• Name: Puks - K„„ndmik VW T. SUPERB/PASSAT/TOURAN 14-
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Name: Puks
• Manufacturer: LMI

Fitting Position: Rear Axle Left, Rear Axle Right, Lower, Front, outer SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle, Lower, Front
• Inner Diameter [mm]: 12.3
• Outer Diameter [mm]: 60.2
• Width 1 [mm]: 45
• Width 2 [mm]: 64
• SVHC: No SVHC present!
• Manufacturer: FAG

Name: TULEJA WAH. VW T. A3 (8V1, 8VK) —REDNICA 12,3X60,2 SZEROKOS 45/64

• Fitting Position: Front Axle, inner, Front
• Height 1 [mm]: 54
• Height 2 [mm]: 33
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Manufacturer: KAVO

• Fitting Position: Front Axle, Rear
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 13.2
• Outer Diameter [mm]: 65.3
• Width 1 [mm]: 28
• Width 2 [mm]: 50
• SVHC: No SVHC present!
• Name: Puks
• Manufacturer: FAG

• Weight [kg]: 0.13
• Fitting Position: Rear Axle both sides, Lower
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 37
• Length [mm]: 50
• Manufacturer: RTS

• Weight [kg]: 0.342
• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Control arm bush left=right

• Weight [kg]: 0.18
• Fitting Position: Rear Axle both sides, Lower, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Diameter 1 [mm]: 12.1
• Diameter 2 [mm]: 60.3
• Length [mm]: 63.8
• Manufacturer: RTS

• Fitting Position: Rear Axle Left, Rear Axle Right, Lower
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Material: Rubber/Metal
• Weight [kg]: 0.11
• Name: DY 37-27718
• Manufacturer: DYS

• Thickness [mm]: 50
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 65
• Material: Rubber/Metal
• Fitting Position: Front, Front Axle Left, Lower, Front Axle Right
• Weight [kg]: 0.346
• Name: Puks
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle both sides, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 40
• Inner Diameter [mm]: 12.2
• Length [mm]: 60
• Weight [kg]: 0.087
• Manufacturer: RTS

• Fitting Position: Front Axle, Lower, Rear
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 65
• Height [mm]: 50
• Name: ALT 88894AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle, both sides, Rear
• Name: Puks
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle, in front of axle
• Axle: Multi-link Axle
• for PR number: 0N4
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 60
• Thickness 1 [mm]: 64
• Inner Diameter 2 [mm]: 12
• Outer Diameter 2 [mm]: 60
• Thickness 2 [mm]: 45
• Name: DE TD1785W
• Manufacturer: DELPHI

• Weight [kg]: 0.26
• Fitting Position: Front Axle both sides, Lower, Rear
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 64.7
• Length [mm]: 50
• Manufacturer: RTS

• Fitting Position: Front Axle Left, Front Axle Right, Rear
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left
• Control/Trailing Arm Type: Control Arm
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle Right
• Control/Trailing Arm Type: Control Arm
• Manufacturer: MAGNETI MARELLI

• Weight [kg]: 0.408
• Fitting Position: Rear Axle both sides, Lower, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 72
• Length [mm]: 94.2
• Manufacturer: RTS