• Length [mm]: 56
• Spanner Size: 17
• Housing Colour: black
• Manufacturer: KAMOKA

• Fabrication Number: ECT-HD-003
• Manufacturer: NTY
• Name: NTY ECT-HD-003

• Thread Size: M 10 X1,25
• Manufacturer: ASHIKA

Manufacturer: MAGNETI MARELLI

• Fabrication Number: ECT-HD-002
• Manufacturer: NTY
• Name: NTY ECT-HD-002

• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M 10x1,25
• Sensor Type: NTC Sensor
• Spanner Size: 17 mm
• for OE number: 37870PLC004
• Manufacturer: MEAT&DORIA

• Number of connectors: 2
• Manufacturer: JPN

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• Spanner Size: 17
• Thread Size: M10x1.25
• for OE number: 37870PLC004
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Thread Size: M10x1.25
• Manufacturer: VERNET

• Length [mm]: 56
• Spanner Size: 17
• Number of connectors: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.02
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 37500-PNB-003
• Length [mm]: 64
• Supplementary Article/Info 2: with seal ring
• Fabrication Number: ECP-HD-013
• Manufacturer: NTY

• Fitting Position: Exhaust Side
• Transmission Type: CVT automatic transmission (stepless)
• Fabrication Number: ECP-HD-005
• Manufacturer: NTY

• Engine Code: LDA1
• Manufacturer Restriction: MATSUSHITA
• Sensor Type: NTC Sensor
• Spanner Size: 17
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Manufacturer: MEYLE

• Thread Size: M10 x 1,25
• Number of pins: 2
• Manufacturer: ERA

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S17
• Thread Size: M10*1,25
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 21.2
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Thread Size: M 10x1,25
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Mounting Type: Bolted
• Voltage [V]: 12
• Thread Size: M10x1,25
• Spanner Size: 17
• Sensor Type: NTC Sensor
• Number of pins: 2
• Manufacturer Restriction: MATSUSHITA, KEIHIN, PANASONIC
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PT009309421
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front Axle Right
• Manufacturer: ASHIKA

• Fitting Position: Front Axle Right
• Manufacturer: JAPKO

• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6
• for OE number: 37870PLC004, 37870RAAA01

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Name: Andur,Nukkvollipositsioon
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAG

• Fabrication Number: ECM-HD-002
• Manufacturer: NTY
• Name: NTY ECM-HD-002

Manufacturer: JPN

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Fitting Position: Front Axle Left
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: JPA

• Fitting Position: Front Axle Left
• Manufacturer: JAPKO

• Number of connectors: 3
• Weight [kg]: 0.02
• Name: Andur,Nukkvollipositsioon
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Right
• Manufacturer: ASHIKA

• Housing Colour: black
• Number of pins: 2
• Thread Size: M10×1.25-6g
• Spanner Size: 17
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• for OE number: 37500-PNB-003
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Length [mm]: 64
• Name: Andur, v„ntvoll
• Manufacturer: MAX

• Engine Code: LDA1
• Manufacturer Restriction: MATSUSHITA
• Thread Size: M10x1,25
• Spanner Size: 17
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Fitting Position: Rear Axle Right
• Manufacturer: JAPKO

• Engine Code: LDA1
• Manufacturer Restriction: MATSUSHITA
• Thread Size: M10x1,25
• Spanner Size: 17
• Manufacturer: FACET

• Number of connectors: 3
• Weight [kg]: 0.02
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 3
• Weight [kg]: 0.02
• Name: SW 85 10 8240
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: ASHIKA

Manufacturer: JAPKO

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: JPA

• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• for OE number: 37500PNB003
• Name: Andur, v„ntvoll
• Manufacturer: MD
• Lisainfo: 87608 BUG
• Additional information: 87608 BUG

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO

Manufacturer: JPN

• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle Left
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: JPA

• Oxygen Sensor: Diagnostic Probe, Heated
• Voltage [V]: 12
• Length [mm]: 550
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Name: Andur, v„ntvoll
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Manufacturer: METZGER

• Left-/right-hand drive vehicles: for right-hand drive vehicles
• paired article number: ADH27169
• Length [mm]: 860
• Fitting Position: Rear Axle Right
• Weight [kg]: 0.152
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: Piezoelectric Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV121

• Pressure [Pa] from: 10,000
• Pressure [Pa] to: 169,000
• Voltage [V]: 5
• Number of pins: 3
• Number of mounting bores: 1
• Supplementary Article/Supplementary Info: with gaskets/seals
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA ELEKTRYKA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Pressure from [kPA]: 13
• Name: Andur,ohuvotu rohk
• Manufacturer: DLP

• for OE number: 37510-PNB-003
• Required quantity: 1
• Operating Mode: Electronic
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Resistor [Ohm]: 6
• Length [mm]: 540
• Conductor Number: 4
• Number of circuits: 4
• Cable Length [mm]: 540
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Oxygen Sensor: Diagnostic Probe, Switching-type Oxygen Sensor
• Engine Code: LDA1
• Voltage [V]: 12
• Length [mm]: 740
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.11
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV008

• Oxygen Sensor: Switching-type Oxygen Sensor
• Cable Length [mm]: 290
• Alternatively:
• Supplementary Article/Info 2: without plug
• Number of circuits: 4
• Alternative Repair Kit: 570111
• Manufacturer: ERA

• Oxygen Sensor: Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 470
• Weight [kg]: 0.12
• Observe service information:
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP358152351
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front, after catalytic converter
• Length [mm]: 600
• Thread Size: M18x1.5-6e
• Number of pins: 4
• Oxygen Sensor: Heated
• Manufacturer: KAVO

• Oxygen Sensor: Diagnostic Probe, Heated
• Voltage [V]: 12
• Length [mm]: 550
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

Manufacturer: MAGNETI MARELLI

• Oxygen Sensor: Diagnostic Probe
• Number of pins: 4
• Cable Length [mm]: 480
• for OE number: 36531PLD013
• Manufacturer: MEAT & DORIA

• Number of connectors: 3
• Weight [kg]: 0.03
• for OE number: 37500-PNB-003
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS10929

• Length [mm]: 64.3
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Manual Transmission
• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: FAE

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Length [mm]: 550
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Number of pins: 3
• Manufacturer: FAE

• Number of connectors: 3
• Colour: black
• Weight [kg]: 0.01
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO
• Name: VA 254077

• Engine Code: LDA1
• Pressure from [kPA]: 10
• Pressure to [kPA]: 169
• Output Voltage, from [V]: 0.405
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.026
• Manufacturer: EPS

• Number of pins: 2
• Fitting Position: Front Axle Right
• paired article number: 09001044
• Manufacturer: METZGER

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Line insulation design: with silicone-coated woven-fibre insulation
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Measuring Range from [kPa]: 10
• Measuring Range to [kPa]: 165
• Measuring Range from [V]: 0.4
• Measuring Range to [V]: 4.65
• Number of connectors: 3
• Manufacturer: VERNET

• Transmission Type: Manual Transmission
• Exhaust System: for pre-catalytic converter
• for OE number: 36531PZAE01, 36531-PZA-E01
• Thread Size: M18x1.5
• Cable Length [mm]: 260
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 93
• Gross Weight [g]: 126
• Manufacturer: DENSO

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Broadband Oxygen Sensor, Thread pre-greased