• for OE number: 46750243
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 630
• Number of pins: 4
• Weight [g]: 122
• Gross Weight [g]: 155
• Manufacturer: DENSO

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
MAREA WEEKEND (185),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
MAREA WEEKEND (185),
(kvaliteediklass: Q)"

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-AR-000
• Manufacturer: NTY

• Engine Code: 312 A1.000
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MAX

• Number of pins: 3
• Weight [kg]: 0.04
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV499

• Construction Year from: 06.2010
• Construction Year to: 09.2015
• Number of pins: 2
• Housing Colour: green
• Weight [kg]: 0.03
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fabrication Number: ESS-FT-002
• Manufacturer: NTY

• Engine Code: 312 A1.000
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.830.326K, 1.880.672, 1.880.699, 1.880.701, 1.880.758, 1.880.938

Fabrication Number: ECM-RE-002

• Engine Code: 312 A1.000
• Manufacturer Restriction: CLASSICLINE
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Number of pins: 2
• Socket colour: brown
• External Thread [mm]: M12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19
• for OE number: 55190791
• Manufacturer: MEAT&DORIA

• Fabrication Number: ECM-RE-006
• Manufacturer: NTY

Lisainfo: ENG. 0.9-2.5D RENAULT CLIO 12-,MEGANE 03-,TRAFIC 06-, OPEL MOVANO 06-,VIVARO 01-,NISSAN MICRA III 05-12,NOTE 06-12,FIAT 500 09-,DOBLO 10-,DACIA DUSTER 10-,LOGAN 10-,DOKKER 12-,ALFA ROMEO 159 09-12, GIULIETTA 10- Additional information: ENG. 0.9-2.5D RENAULT CLIO 12-,MEGANE 03-,TRAFIC 06-, OPEL MOVANO 06-,VIVARO 01-,NISSAN MICRA III 05-12,NOTE 06-12,FIAT 500 09-,DOBLO 10-,DACIA DUSTER 10-,LOGAN 10-,DOKKER 12-,ALFA ROMEO 159 09-12, GIULIETTA 10-

• Engine Code: 312 A3.000
• not for emission standard: Euro 6
• Voltage [V]: 12
• Number of pins: 3
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MAX

• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FAST

• Height [mm]: 28
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Version: 2
• Number of pins: 3
• Name: DE SS12295-12B1
• Manufacturer: DELPHI

• Emission Standard: Euro 5
• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA OPEL CORSA 01-
• Manufacturer: BRM

• Engine Code: 312 A1.000
• Required quantity: 1
• Name: EP 1.957.006
• Manufacturer: EPS

• Required quantity: 1
• Vehicle type: 500C
• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PG013114441

Brief Information: *** HELLA Electronics OE competence for over 60 years.

Manufacturer: MAGNETI MARELLI

• Engine Code: 312 A3.000
• Emission Standard: Euro 6, Euro 6d
• Temperature range from [°C]: -40
• Temperature range to [°C]: 130
• Number of pins: 3
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: MAX

• Number of pins: 3
• Sensor Type: Hall Sensor
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Emission Standard: Euro 6
• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA RENAULT LAGUNA 1,9DCI 01-
• Manufacturer: BRM

• Number of pins: 2
• Name: DETONATSIOONIANDUR
• Manufacturer: DLP

• Required quantity: 1
• Vehicle type: 500C
• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: oval
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PG013114341
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: 312 A3.000
• Temperature range from [°C]: -40
• Temperature range to [°C]: 130
• Manufacturer: BOSCH

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring
• Alternative Repair Kit: 550245
• Manufacturer: ERA

• Engine Code: 312 A3.000
• not for emission standard: Euro 6
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Version: 1
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. FIAT 500 1,4 02-
• Manufacturer: BRM

• Engine Code: 312 A3.000
• not for emission standard: Euro 6
• for OE number: 55238125
• Temperature range from [°C]: -40
• Temperature range to [°C]: 130
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA OPEL CORSA 1,3CDTI 03-
• Manufacturer: BRM

• Number of pins: 3
• Pressure from [kPA]: 27
• Manufacturer: DELPHI
• Name: DE PS10130

• Engine Code: 312 A3.000
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Fabrication Number: ESL-AR-002
• Manufacturer: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Transmission Type: 5-Speed Manual Transmission, automatically operated, 5-Speed Automatic Transmission Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased

• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Connector Shape: oval
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Manufacturer: FAST

• Fabrication Number: ESL-FT-004
• Manufacturer: NTY
• Name: NTY ESL-FT-004

Fitting Position: Front, before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Sensor Type: Piezoelectric Sensor
• Number of pins: 2
• Name: Detonatsiooniandur
• Manufacturer: MEY

• for model code: 4 Pin
• Number of pins: 3
• Pressure from [kPA]: 27
• Manufacturer: DELPHI
• Name: DE PS10141

• Engine Code: 312 A1.000
• Pressure from [kPA]: 20
• Pressure to [kPA]: 256
• Output Voltage, from [V]: 0.386
• Output Voltage, up to [V]: 4.75
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Engine Code: 312 A1.000, 312 A3.000
• Number of pins: 3
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY

• Engine Code: 312 A3.000
• Warranty: 5 years warranty
• Manufacturer: HUCO

• Engine Code: 312 A1.000
• Required quantity: 1
• Manufacturer Restriction: CLASSICLINE
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Engine Code: 312 A3.000
• not for emission standard: Euro 6
• for OE number: 46769978
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Alternatively:
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11146

• Engine Code: 312 A3.000
• Number of connectors: 3
• Fitting Position: Upper
• Weight [kg]: 0.026
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Emission Standard: Euro 5
• Warranty: 5 years warranty
• Manufacturer: HUCO

• Engine Code: 312 A1.000
• Emission Standard: Euro 6
• Pressure from [kPA]: 11
• Pressure to [kPA]: 306
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: EPS

• Engine Code: 312 A3.000
• Number of connectors: 3
• Fitting Position: Upper
• Weight [kg]: 0.026
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Alternatively:
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Alternative Repair Kit: 550756
• Manufacturer: ERA

• Required quantity: 1
• Vehicle type: 500C
• Number of pins: 3
• Fitting Depth [mm]: 28.2
• Supplementary Article/Info 2: with seal ring
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead, 872-50-4; 1-Methyl-2-pyrrolidone
• Manufacturer: HELLA
• Name: HE 6PU009168081

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: 312 A3.000
• Warranty: 5 years warranty
• Name: Andur,ohuvotu rohk
• Manufacturer: HUC

Supplementary Article/Info 2: Article Number is to be determined by diagnostics tester

• Engine Code: 312 A3.000
• Emission Standard: Euro 6, Euro 6d
• Temperature range from [°C]: -40
• Temperature range to [°C]: 130
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 385
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
SEICENTO (187), 01.9
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
SEICENTO (187), 01.9
(kvaliteediklass: PJ)"

• Emission Standard: Euro 5
• Number of pins: 4
• Pressure from [kPA]: 26
• Manufacturer: DELPHI
• Name: DE PS10182

• Engine Code: 312 A1.000, 312 A3.000
• Fitting Position: Front, before catalytic converter
• Lambda Sensor: Regulating Probe, Heated
• Number of circuits: 4
• Length [mm]: 350
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda Sensor: Diagnostic Probe, Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV909
• Manufacturer: ESEN SKV

• Number of pins: 4
• Pressure from [kPA]: 20
• Pressure to [kPA]: 250
• Colour: black
• Manufacturer: FAE

• Engine Code: 312 A3.000
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 340
• Socket colour: black
• Number of circuits: 4
• Connector Shape: oval
• Number of pins: 4
• Weight [kg]: 0.119
• for OE number: 46 455 802
• Length [mm]: 450
• Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of connectors: 4
• Colour Coding: black
• Lambda Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: 312 A3.000
• Lambda Sensor: Diagnostic Probe, Regulating Probe, Heated
• not for emission standard: Euro 6
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

Transmission Type: not for sequential manual transmission, Sequential Manual Transmission Fitting Position: before catalytic converter, after catalytic converter

• Number of pins: 3
• Pressure from [kPA]: 20
• Pressure to [kPA]: 300
• Manufacturer: FAE

• Construction Year from: 06.2010
• Construction Year to: 09.2015
• Engine Code: 312A3.000
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.08
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 300
• Manufacturer: DELPHI

• Sensor Type: Hall Sensor
• Number of pins: 3
• Housing Colour: black
• Supplementary Article/Supplementary Info: with seal
• Supplementary Article/Info 2: without cable
• Manufacturer: FAE

• Length [mm]: 972
• Lambda Sensor: Lambda Sensor
• Number of circuits: 4
• Manufacturer: FAST

• Vehicle type: 500C
• Number of pins: 3
• Mounting Type: Bolted
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PP009400111
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Diagnostic Probe, Lambda Sensor
• Engine Code: 312 A3.000
• Voltage [V]: 12
• Length [mm]: 610
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV054
• Manufacturer: ESEN SKV

• Engine Code: 312 A1.000
• Emission Standard: Euro 6
• Required quantity: 1
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.341
• Manufacturer: EPS

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Length [mm]: 800
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Length [mm]: 300
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Engine Code: 312 A3.000
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• not for emission standard: Euro 6
• Number of circuits: 4
• Overall Length [mm]: 325
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Number of pins: 4
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Manufacturer: FAE

• Number of circuits: 4
• Conductor Number: 4
• Length [mm]: 630
• Resistor [Ohm]: 9
• Cable Length [mm]: 630
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Lambda Sensor: Diagnostic Probe, Heated
• Voltage [V]: 12
• Length [mm]: 650
• Number of circuits: 4
• Weight [kg]: 0.14
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV638
• Manufacturer: ESEN SKV

• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Required quantity: 1
• Vehicle type: 500C
• Cable Length [mm]: 350
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: 312 A1.000, 312 A3.000
• not for emission standard: Euro 6
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Diagnostic Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: 312 A3.000
• Lambda Sensor: Diagnostic Probe, Regulating Probe
• not for emission standard: Euro 6
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: after catalytic converter, before catalytic converter Transmission Type: not for sequential manual transmission, Sequential Manual Transmission

• Engine Code: 312 A1.000
• Emission Standard: Euro 5
• Required quantity: 1
• Pressure from [kPA]: 11
• Pressure to [kPA]: 255
• Output Voltage, from [V]: 0.39
• Output Voltage, up to [V]: 4.7
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Exhaust System: for pre-catalytic converter
• for OE number: 46751082
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 400
• Number of pins: 4
• Weight [g]: 113
• Gross Weight [g]: 146
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
IDEA, 12.03-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
IDEA, 12.03-
(kvaliteediklass: Q)"

• Engine Code: 312 A3.000
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Emission Standard: Euro 6
• Transmission Type: Sequential Manual Transmission
• Number of circuits: 4
• Overall Length [mm]: 795
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Engine Code: 312 A3.000
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• not for emission standard: Euro 6
• Transmission Type: not for sequential manual transmission
• Number of circuits: 4
• Overall Length [mm]: 630
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: 312 A3.000
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Emission Standard: Euro 6
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Transmission Type: Manual Transmission, automatically operated
• Emission Standard: Euro 6
• Fitting Position: after catalytic converter
• Lambda Sensor: Diagnostic Probe
• Length [mm]: 795
• Cable Length [mm]: 685
• Number of pins: 4
• Number of circuits: 4
• Connector Shape: oval
• Manufacturer: METZGER