• Number of pins: 2
• Socket colour: green
• Diameter [mm]: 25.5
• Fitted Diameter [mm]: 20
• for OE number: SU00100639
• Manufacturer: MEAT&DORIA

Manufacturer: MAGNETI MARELLI

• Engine Code: TYDA
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS
• Additional information: 1-830-292
• Lisainfo: 1-830-292

for article number: 1.880.486, 1.880.708, 1.880.734, 1.880.747, 1.880.748, 1.880.790

• Engine Code: TYDA
• for article number: 7.8486, 7.8708, 7.8734, 7.8747, 7.8748, 7.8790
• Manufacturer: FACET

• Supplementary Article/Info 2: High Pressure Side
• Cable Length [mm]: 150
• Weight [kg]: 0.01
• Guarantee: 3 years guarantee
• Cable Cross Section [mm²]: 0.75
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Number of pins: 2
• Fitted Diameter [mm]: 20
• Housing Colour: green
• Manufacturer: FAE

• Fabrication Number: ECP-CT-013
• Manufacturer: NTY

• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Construction Year from: 03.2011
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.03
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV500

• Engine Code: TYDA
• Required quantity: 1
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• for OE number: 1920.7V
• Sensor Type: Active sensor
• Manufacturer: KAMOKA

• Engine Code: TYDA
• Thread Size: M12x1,25
• Spanner Size: 19
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: EPS

• Engine Code: TYDA
• Thread Size: M12x1,25
• Spanner Size: 19
• Manufacturer: FACET

• Fabrication Number: ECM-VV-008
• Manufacturer: NTY

• Height [mm]: 23.3
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Sensor Type: Hall Sensor
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MEY

• Required quantity: 1
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: rectangular
• Number of pins: 3
• Fitting Depth [mm]: 22.1
• Manufacturer: NRF

• Number of pins: 3
• Housing Colour: white
• Manufacturer: FAE

• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 3
• Name: DE SS12312-12B1
• Manufacturer: DELPHI

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: grey
• Manufacturer: BREMI

• for OE number: AV61-5L200-AA, AV61-5L200-AB
• Number of pins: 3
• Connector Shape: oval
• Fabrication Number: ECS-FR-001
• Manufacturer: NTY

• Construction Year from: 01.2011
• Required quantity: 1
• Engine Code: TYDA
• Corresponds to the original part in colour: grey
• Number of pins: 3
• Colour Coding: black
• Sensor Type: Impulse Sensor
• Assy./disassy. by qualified personnel required!:
• Name: Andur,Nukkvollipositsioon
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Supplementary Article/Info 2: High Pressure Side
• Number of circuits: 3
• Version: mit Stoßverbinder
• Cable Length [mm]: 250
• Wire cross-section [mm²]: 0,75
• Manufacturer: METZGER

• Construction Year to: 10.2012
• Length [mm]: 56
• Outer Diameter [mm]: 11
• Number of connectors: 3
• Weight [kg]: 0.016
• Manufacturer: BLUE PRINT ELEKTRYKA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV160

• Engine Code: TYDA
• Required quantity: 1
• Number of pins: 3
• Fitting Depth [mm]: 22
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Engine Code: TYDA
• Required quantity: 1
• Manufacturer: FACET

• Construction Year to: 10.2012
• Length [mm]: 55.5
• Outer Diameter [mm]: 11
• Number of connectors: 3
• Weight [kg]: 0.021
• Name: SW 62 93 1240
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for facelift:
• Cable Length [mm]: 200
• Manufacturer Restriction: Ford, Citroen, Peugeot
• Number of pins: 3
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable Cross Section [mm²]: 0.75
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• for OE number: 1920 PW
• for article number: 70610037
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, ohuvotu rohu andur
• Manufacturer: HBE

• Engine Code: TYDA
• Required quantity: 1
• Manufacturer: EPS

• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO
• Name: VA 253808

• Engine Code: TYDA
• Pressure from [kPA]: 13
• Pressure to [kPA]: 317
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Supplementary Article/Info 2: High Pressure Side, with pipe
• Manufacturer Restriction: Alfa Romeo, Ford, Opel
• Number of pins: 3
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Cable Cross Section [mm²]: 0.75
• Cable Length [mm]: 200
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabliparanduskomplekt, nukkvolli asendi andur
• Manufacturer: HBE

• for facelift:
• Manufacturer Restriction: Citroen, Peugeot
• Number of pins: 4
• Supplementary Article/Supplementary Info: with socket housing, with gasket/seal
• Supplementary Article/Info 2: with pipe
• Cable Cross Section [mm²]: 0.75
• Cable Length [mm]: 200
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, p„evatuled
• Manufacturer: HBE

• Engine Code: TYDA
• Pressure from [kPA]: 13
• Pressure to [kPA]: 317
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Supplementary Article/Info 2: Low Pressure Side, with pipe
• Manufacturer Restriction: BMW
• Number of pins: 3
• Supplementary Article/Supplementary Info: with socket housing, with gasket/seal
• Cable Cross Section [mm²]: 0.75
• Cable Length [mm]: 200
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, sensor- parkimisabi
• Manufacturer: HBE

• Sensor Type: Piezoelectric Sensor
• Number of pins: 4
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY

Supplementary Article/Info 2: with integrated air temperature sensor, with seal ring

• Number of pins: 3
• Manufacturer: JPN

• Number of connectors: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV649

• Fitting Position: Intake Manifold
• Number of pins: 4
• Pressure from [kPA]: 30
• Pressure to [kPA]: 300
• Manufacturer: FAE

• Exhaust System: before soot particulate filter
• Engine Code: TYDA
• Number of pins: 3
• Manufacturer: NRF

• Housing Type: without housing
• Fabrication Number: EPP-FR-004

• Exhaust System: before soot particulate filter
• Engine Code: TYDA
• Connector Shape: oval
• Number of pins: 3
• for OE number: 1775946
• Manufacturer: NRF

• Number of pins: 4
• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: with integrated air temperature sensor
• for OE number: 9663480880
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Manufacturer: JPN

• Number of connectors: 3
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.06
• for OE number: 1 369 263
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• Number of connectors: 4
• Weight [kg]: 0.02
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pressure from [kPA]: 30
• Pressure to [kPA]: 300
• Number of pins: 4
• Country Specific Design: Japan
• not for country specific design: Japan
• for OE number: 1920QR
• Gross Weight [g]: 50
• Manufacturer: DENSO
• Name: DN DAP-0116

• Number of connectors: 3
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.06
• for OE number: 1 369 263
• Name: SW 33 10 8052
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 01.2011
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MEY

• Number of pins: 3
• Connector Shape: oval
• Number of connectors: 2
• Quality: OE EQUIVALENT
• for OE number: 1786775
• Name: Andur, heitgaasisurve
• Manufacturer: MD

• Number of connectors: 4
• Weight [kg]: 0.02
• Name: SW 50 10 6021
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV328

• Exhaust System: before soot particulate filter
• Opening pressure [kPa]: 0
• Name: DE DPS00026-12B1
• Manufacturer: DELPHI

• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• Number of pins: 3
• Colour: grey
• Version: OE
• Manufacturer: METZGER

• Guarantee: 5 years guarantee
• Manufacturer: HUCO
• Name: HU 137414

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Number of pins: 3
• Colour: black
• Manufacturer: FAE ELEKTRYKA

• Quality: OE EQUIVALENT
• for OE number: C2C39730
• Manufacturer: MEAT&DORIA

• Production date to: 21.07.2015
• Voltage [V]: 12
• Name: Ohumassimootja
• Manufacturer: MAX

• Construction Year from: 01.2011
• Exhaust System: before soot particulate filter
• Engine Code: TYDA
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: Andur, heitgaasisurve
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Voltage [V]: 12
• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Manufacturer: METZGER

• Manufacturer: FAE

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Number of pins: 4
• Plug Type: Male
• Voltage [V]: 12
• Quality class: PJ
• Name: Air flow sensor

• Fabrication Number: EGT-FR-020
• Fitting Position: after catalytic converter
• Cable Length [mm]: 670
• Number of pins: 2
• Sensor Type: NTC Sensor
• Connector Shape: oval
• Manufacturer: NTY

• Colour: black
• Material: Plastic
• Alternatively:
• Number of pins: 3
• Number of connectors: 3
• Connector Shape: oval
• Number of mounting bores: 1
• Diameter 1/Diameter 2 [mm]: 8.4 / 7.5
• Centering Diameter [mm]: 10
• Alternative Repair Kit: 550933
• Manufacturer: ERA

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Guarantee: 3 years guarantee
• Weight [kg]: 0.16
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping Range from [mm]: 10, 11, 11.5, 12.5
• Clamping Range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Housing Type: without housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black/silver
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Name: DE AF10374-12B1

• Supplementary Article/Info 2: without connection line
• Number of mounting bores: 2
• for OE number: 1 366 758
• Weight [kg]: 0.063
• Connector Shape: oval
• Number of circuits: 2
• Number of pins: 3
• Manufacturer: ENERGY

Vehicle Equipment: for vehicles with steering angle sensor at steering gear

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 4
• Housing Type: without housing
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM

• Quality: OE EQUIVALENT
• for OE number: 213719764010
• Manufacturer: MEAT&DORIA

• Name: Andur, heitgaasisurve
• Manufacturer: BOS

• Construction Year from: 01.2011
• Required quantity: 1
• Engine Code: TYDA
• Mounting Type: Bolted
• Number of pins: 4
• Supplementary Article/Supplementary Info: without suction pipe
• Assy./disassy. by qualified personnel required!:
• Name: Ohumassimootja
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Production date from: 03.01.2011
• Production date to: 21.07.2015
• Fitting Position: Soot Particulate Filter
• Number of pins: 3
• Manufacturer: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Supplementary Article/Info 2: without connection line
• Number of mounting bores: 2
• for OE number: 1 366 758
• Connector Shape: oval
• Number of circuits: 2
• Number of pins: 3
• Manufacturer: VEMO

Vehicle Equipment: for vehicles with steering angle sensor at steering gear General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Voltage [V]: 12
• Operating Mode: Electric
• Housing Type: without housing
• Number of pins: 4
• Number of connectors: 4
• Connector Shape: oval
• New Part:
• Used part return not required:
• Recommended additional repairs: Air Filter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 630
• Name: DE ES21136-12B1
• Manufacturer: DELPHI

• Number of pins: 3
• Connector Shape: oval
• Number of connectors: 2
• for OE number: 31319635
• Manufacturer: MEAT&DORIA