• Engine Code: MUDA
• Rims: for steel rims
• Spanner Size: 19
• Wheel Fastening: Conical Seat F
• for OE number: 1470843
• Thread Size: M 12 x 1,5
• Manufacturer: DELLO AUTOMEGA

• Quantity per packing unit: 50
• Fitting Position: Front Axle, Rear Axle
• Thread Size: M12 x 1,5
• Bolt Head-/Nut Design: Male Hex
• Spanner Size: 19
• Rims: for steel rims
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: MUDA
• Rims: for steel rims
• Thickness [mm]: 15
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 10
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.02
• Observe service information:
• Manufacturer: FEBI BILSTEIN
• Additional information: FE27413
• Lisainfo: FE27413

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: MUDA
• Rims: for steel rims
• Thickness [mm]: 15
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 10
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.02
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 07.2011
• Engine Code: MUDA, MUDD
• Block Separation:
• Rims: for steel rims
• Spanner Size: 19
• Wheel Fastening: Conical Seat F
• for OE number: 5114405
• Thread Size: M 12 x 1,5
• Manufacturer: DELLO AUTOMEGA

• Engine Code: MUDA, MUDD
• Construction Year from: 07.2011
• Block Separation:
• Rims: for steel rims
• Thickness [mm]: 15
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 10
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Surface: Zink-nickel coated
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.022
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: MUDA
• Quantity per packing unit: 25
• Fitting Position: Rear Axle, Front Axle
• for OE number: 1 470 843
• Internal Thread [mm]: M12 x 1,5
• Spanner Size: 19
• Thickness [mm]: 15
• Quality/ Grade: 10
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: MUDA, MUDD
• Construction Year from: 07.2011
• Block Separation:
• Rims: for steel rims
• Thickness [mm]: 15
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 10
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Surface: Zink-nickel coated
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.022
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Wheel Fastening: Conical Seat F
• Fitting Position: Front Axle, Rear Axle
• Spanner Size: 19
• Quality/ Grade: 10
• Manufacturer: FAST

• Engine Code: MUDA
• Construction Year to: 12.2012
• Rims: for light alloy rims, for steel rims
• Thickness [mm]: 31
• Outer Diameter [mm]: 28
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 10
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Surface: Chromed
• Supplementary Article/Info 2: with lid
• Fitting Position: Rear Axle, Front Axle
• Weight [kg]: 0.06
• Observe service information:
• Manufacturer: FEBI BILSTEIN
• Additional information: F29463
• Lisainfo: F29463

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 52
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 32
• Quality/ Grade: 10.9
• Shaft Length [mm]: 13
• Material: Steel
• Screw length below head [mm]: 48
• Fitting Position: Front Axle Left, Front Axle Right
• Bolt/Nut Version: Knurled Bolt
• Knurl Diameter [mm]: 13
• Bolt Head Diameter [mm]: 17
• Weight [kg]: 0.046
• Manufacturer: FEBI BILSTEIN
• Additional information: F100164
• Lisainfo: F100164

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: MUDA
• Construction Year to: 12.2012
• Rims: for light alloy rims, for steel rims
• Thickness [mm]: 31
• Outer Diameter [mm]: 28
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 10
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Surface: Chromed
• Supplementary Article/Info 2: with lid
• Fitting Position: Rear Axle, Front Axle
• Weight [kg]: 0.06
• Observe service information:
• Manufacturer: FEBI BILSTEIN
• Lisainfo: 46674 FEBI
• Additional information: 46674 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 52
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 32
• Quality/ Grade: 10.9
• Shaft Length [mm]: 13
• Material: Steel
• Screw length below head [mm]: 48
• Fitting Position: Front Axle Left, Front Axle Right
• Bolt/Nut Version: Knurled Bolt
• Knurl Diameter [mm]: 13
• Bolt Head Diameter [mm]: 17
• Weight [kg]: 0.046
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Height [mm]: 31
• Thread Size: M12 x 1,5
• Manufacturer: 3RG

• Engine Code: MUDA, MUDD
• Construction Year from: 12.2012
• Block Separation:
• Rims: for light alloy rims, for steel rims
• Thickness [mm]: 31
• Outer Diameter [mm]: 26.5
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 10
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Surface: Chromed
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.05
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 52.3
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 32
• Quality/ Grade: 10.9
• Shaft Length [mm]: 13
• Material: Steel
• Screw length below head [mm]: 48
• Fitting Position: Front Axle Left, Front Axle Right
• Bolt/Nut Version: Knurled Bolt
• Knurl Diameter [mm]: 13
• Bolt Head Diameter [mm]: 17
• Weight [kg]: 0.046
• Name: SW 50 10 0164
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: MUDA
• Construction Year to: 12.2012
• Rims: for light alloy rims, for steel rims
• Thickness [mm]: 31
• Outer Diameter [mm]: 28
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 10
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Surface: Chromed
• Supplementary Article/Info 2: with lid
• Fitting Position: Rear Axle, Front Axle
• Weight [kg]: 0.06
• Observe service information:
• Name: SW 50 92 9463
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: MUDA, MUDD
• Construction Year from: 12.2012
• Block Separation:
• Rims: for light alloy rims, for steel rims
• Thickness [mm]: 31
• Outer Diameter [mm]: 26.5
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 10
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Surface: Chromed
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.05
• Name: SW 50 94 4949
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: MUDA, MUDD
• Construction Year from: 12.2012
• Block Separation:
• Rims: for light alloy rims, for steel rims
• Thickness [mm]: 31
• Outer Diameter [mm]: 26.5
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 10
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Surface: Chromed
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.05
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: MUDA
• Construction Year to: 12.2012
• Quantity per packing unit: 20
• Internal Thread [mm]: M12 x 1,5
• Wheel Fastening: Conical Seat F
• Fitting Position: Rear Axle, Front Axle
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: MUDA
• Construction Year to: 12.2012
• Quantity per packing unit: 25
• Internal Thread [mm]: M12 x 1,5
• Fitting Position: Rear Axle, Front Axle
• Spanner Size: 19
• Thickness [mm]: 31
• Bolt Head-/Nut Design: Male Hex
• Quality/ Grade: 8
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: MUDA
• Thickness [mm]: 26
• Outer Diameter [mm]: 23.7
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 8
• Spanner Size: 17, 19
• Wheel Fastening: Conical Seat F
• Material: Steel
• Surface: Chromed
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.26
• Lockable: Lockable
• for OE number: M115
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: MUDA
• Thickness [mm]: 26
• Outer Diameter [mm]: 23.7
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 8
• Spanner Size: 17, 19
• Wheel Fastening: Conical Seat F
• Material: Steel
• Surface: Chromed
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.26
• Lockable: Lockable
• for OE number: M115
• Name: SW 81 92 7057
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.