• Number of pins: 2
• Socket colour: grey
• Spanner Size: 19
• for OE number: 1484876
• Manufacturer: MEAT & DORIA

• Supplementary Article/Info 2: with integrated air temperature sensor
• Fabrication Number: ECM-PL-000
• Manufacturer: NTY
• Name: NTY ECM-PL-000

• Number of pins: 3
• Name: DE SS12362-12B1
• Manufacturer: DELPHI

• Supplementary Article/Info 2: High Pressure Side
• Cable Length [mm]: 150
• Weight [kg]: 0.01
• Guarantee: 3 years guarantee
• Cable Cross Section [mm²]: 0.75
• Always compare old and new part (in particular OE No.):
• Name: CE 53SKV283
• Manufacturer: ESEN SKV

• Engine Code: YUDA
• Spanner Size: 19
• for article number: 1.879.948, 1.879.949, 1.879.950
• Name: EP 1.830.285
• Manufacturer: EPS
• Additional information: EP 1.830.285
• Lisainfo: EP 1.830.285

• Engine Code: YUDA
• Spanner Size: 19
• for article number: 7.7948, 7.7949, 7.7950
• Manufacturer: FACET

• Pressure from [kPA]: 10
• Pressure to [kPA]: 307
• Fabrication Number: ECM-FR-005
• Manufacturer: NTY

• Fabrication Number: ESS-FR-003
• Manufacturer: NTY

• Sensor Type: NTC Sensor
• Number of pins: 2
• Housing Colour: grey
• Manufacturer: FAE

• Number of pins: 3
• Fabrication Number: ECP-FR-013
• Manufacturer: NTY

• Pressure from [kPA]: 11
• Pressure to [kPA]: 30
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Required quantity: 1
• Supplementary Article/Info 2: with integrated air temperature sensor
• Manufacturer: BREMI

• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Pressure from [kPA]: 20
• Pressure to [kPA]: 300
• Quality: OE EQUIVALENT
• for OE number: 1859079J62000
• Manufacturer: MEAT&DORIA

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Number of pins: 3
• Manufacturer: JPN

Manufacturer: JPN

• Supplementary Article/Info 2: High Pressure Side
• Number of circuits: 3
• Version: mit Stoßverbinder
• Cable Length [mm]: 250
• Wire cross-section [mm²]: 0,75
• Manufacturer: METZGER

• Construction Year to: 12.2014
• Manufacturer: BOSCH
• Name: BS 0261230524

• Engine Code: YUDA
• Quantity: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 12.2014
• Temperature range from [°C]: -40
• Temperature range to [°C]: 130
• Manufacturer: BOSCH
• Name: BS 0261230280

• Number of pins: 4
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Supplementary Article/Info 2: with integrated air temperature sensor
• Quality: OE EQUIVALENT
• for OE number: 01235084
• Manufacturer: MEAT&DORIA

• Alternatively:
• Number of pins: 4
• Alternative Repair Kit: 551172
• Manufacturer: ERA

• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Connector Shape: oval
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Manufacturer: FAST

• Alternatively:
• Number of pins: 3
• Alternative Repair Kit: 550894
• Manufacturer: ERA

• Length [mm]: 51.6
• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 59
• Bore Diameter [mm]: 7.4
• Number of connectors: 4
• Material: Plastic
• Weight [kg]: 0.027
• Supplementary Article/Info 2: with seal ring
• for OE number: 12 35 029
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Number of pins: 3
• Pressure from [kPA]: 27
• Manufacturer: DELPHI
• Name: DE PS10154

• Length [mm]: 52
• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 59
• Bore Diameter [mm]: 7.4
• Number of connectors: 4
• Material: Plastic
• Weight [kg]: 0.027
• for OE number: 12 35 029
• Supplementary Article/Info 2: with seal ring
• Name: SW 40 93 7055
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 3
• Weight [kg]: 0.021
• for OE number: 1 913 600
• Name: SW 33 10 2195
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Housing Type: without housing
• Fabrication Number: EPP-FR-004
• Manufacturer: NTY

• Engine Code: YUDA
• Required quantity: 2
• Length [mm]: 450
• Name: EP 1.957.091
• Manufacturer: EPS

• Engine Code: YUDA
• Required quantity: 2
• Length [mm]: 450
• Manufacturer: FACET

• Number of connectors: 3
• Weight [kg]: 0.021
• for OE number: 1 913 600
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Pressure from [kPA]: 20
• Pressure to [kPA]: 300
• for OE number: 55206797
• Manufacturer: MEAT&DORIA

• Required quantity: 2
• Mounting Type: Bolted
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of pins: 3
• Sensor Type: Impulse Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 4
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Manufacturer: VDO

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 24
• Manufacturer: ERA

Manufacturer: NRF KLIMATYZACJA

• Number of connectors: 3
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.06
• for OE number: 1 369 263
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 4
• Mounting Type: Bolted
• Supplementary Article/Supplementary Info: with gasket/seal
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP009403331
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: YUDA
• Cable Length [mm]: 450
• Manufacturer: FAE

• Fitting Position: Front
• Oxygen Sensor: Diagnostic Probe
• Number of connectors: 4
• Length [mm]: 725
• Manufacturer: VERNET

• Number of pins: 3
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of connectors: 3
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.06
• for OE number: 1 369 263
• Name: SW 33 10 8052
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of mounting bores: 1
• Pressure [Pa] from: 11,000
• Pressure [Pa] to: 307,000
• Voltage [V]: 5
• Resistor [Ohm]: 2,080
• Number of pins: 4
• Sensor Type: NTC Sensor
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PP009400291
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 4
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Manufacturer: FAE

• Engine Code: YUDA
• Required quantity: 1
• Pressure from [kPA]: 10
• Pressure to [kPA]: 308
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.244
• Manufacturer: EPS

• Engine Code: YUDA
• Pressure from [kPA]: 10
• Pressure to [kPA]: 308
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Engine Code: YUDA
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.341
• Manufacturer: EPS

• Engine Code: YUDA
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Number of pins: 3
• Pressure from [kPA]: 20
• Pressure to [kPA]: 300
• Manufacturer: FAE

• Quality: OE EQUIVALENT
• for OE number: C2C39730
• Manufacturer: MEAT&DORIA

• Required quantity: 1
• Pressure from [kPA]: 10
• Pressure to [kPA]: 307.5
• Measuring Range from [V]: 0.25
• Measuring Range to [V]: 4.75
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP013112081
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Length [mm]: 500
• Number of circuits: 5
• Fabrication Number: ESL-FR-005
• Manufacturer: NTY

Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Thread pre-greased Fitting Position: before catalytic converter, after catalytic converter

• Construction Year to: 12.2014
• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Manufacturer: BOSCH

• Number of pins: 4
• Plug Type: Male
• Voltage [V]: 12
• Quality class: PJ
• Name: Air flow sensor

Manufacturer: MAGNETI MARELLI

• Housing Type: without housing
• Number of pins: 4
• Manufacturer: VDO

• Oxygen Sensor: Regulating Sensor
• Ülekandeliinide arv: 4
• Piirangutega toode/piirangu info 2: ilma pistikuta
• Manufacturer: NGK

• Number of pins: 2
• Cable Length [mm]: 450
• Tightening Torque [Nm]: 20
• Sensor Type: Piezoelectric Sensor
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PG009108731
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 12060-00-3; Lead titanium trioxide, 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 12.2014
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH

• Lambda andur: Bistabiilne andur
• Kaablipikkus (mm): 290
• valikuliselt:
• Ülekandeliinide arv: 4
• alternatiivne remondikomplekt: 570112
• Manufacturer: ERA

• Measuring Range from [kPa]: 10
• Measuring Range to [kPa]: 307.5
• Measuring Range from [V]: 0.25
• Measuring Range to [V]: 4.75
• Number of connectors: 3
• Manufacturer: VERNET

• Oxygen Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of pins: 4
• Cable Length [mm]: 600
• Quality: OE EQUIVALENT
• for OE number: 1327547
• Manufacturer: MEAT & DORIA

• Housing Type: without housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black/silver
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Name: DE AF10374-12B1

• Construction Year to: 12.2014
• Number of pins: 3
• Connector Shape: oval
• Socket colour: black
• Fuel Type: Petrol
• Supplementary Article/Info 2: High Pressure Side
• for OE number: 1729436
• Manufacturer: MEAT&DORIA

• Housing Type: without housing
• Alternatively:
• Number of pins: 4
• Connector Shape: oval
• Manufacturer: ERA

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 4
• Housing Type: without housing
• Manufacturer: BREMI

• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Fitting Depth [mm]: 22
• Manufacturer: ERA

• Required quantity: 1
• Mounting Type: Bolted
• Number of pins: 4
• Supplementary Article/Supplementary Info: without suction pipe
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 8ET009142821

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Quantity: 1
• Voltage [V]: 12
• Operating Mode: Electric
• Housing Type: without housing
• Number of pins: 4
• Number of connectors: 4
• Connector Shape: oval
• New Part:
• Used part return not required:
• Recommended additional repairs: Air Filter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 630
• Conductor Number: 5
• Number of circuits: 5
• Cable Length [mm]: 630
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM152

• Fitting Position: Exhaust Manifold, before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Connector Shape: D Shape
• Number of pins: 6
• Number of circuits: 5
• Socket colour: black
• Thread Size: M18 x 1,5
• Length [mm]: 400
• for OE number: 1 688 499
• Conductor Number: 5
• Cable Length [mm]: 480
• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Värv: punane
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 5
• Kaal (kg): 0,15
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Engine Code: YUDA
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 450
• Conductor Number: 5
• Supplementary Article/Info 2: with fastening material
• Number of circuits: 5
• Manufacturer: FACET

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Engine Code: YUDA
• Fitting Position: after catalytic converter
• Required quantity: 1
• Cable Length [mm]: 720
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: EP 1.998.297
• Manufacturer: EPS

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased

• Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 410
• Manufacturer: DELPHI ELEKTRONIKA

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 660
• Number of pins: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Oxygen Sensor: Broadband Oxygen Sensor
• Number of pins: 5
• Cable Length [mm]: 480
• Quality: OE EQUIVALENT
• for OE number: LR001370
• Manufacturer: MEAT&DORIA

• Engine Code: YUDA
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 450
• Conductor Number: 5
• Supplementary Article/Info 2: with fastening material
• Number of circuits: 5
• Manufacturer: EPS

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Construction Year to: 12.2014
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 450
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH
• Name: BS 0258017357