• Construction Year to: 08.2008
• Fitting Position: inner, Front
• Fabrication Number: EPDC-FR-000
• Manufacturer: NTY
• Name: NTY EPDC-FR-000

• Fitting Position: outer, Front
• Fabrication Number: EPDC-FR-007

• Fitting Position: inner, Rear, Front, outer, both sides
• Fabrication Number: EPDC-FR-006

• Fitting Position: Front
• Fabrication Number: EPDC-FR-010
• Manufacturer: NTY

• Fitting Position: Front, Centre
• Production date from: 01.09.2008
• Manufacturer: DELLO AUTOMEGA

• Vehicle type: AOBC
• Construction Year to: 09.2008
• Fitting Position: outer, Front
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with seal
• Number of connectors: 3
• Chemical Properties: Paintable
• Quality class: PJ
• Name: Parking sensor

• Fitting Position: Front
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: MAGNETI MARELLI
• Name: MM SDP039

• Construction Year from: 06.2007
• Construction Year to: 12.2014
• Fitting Position: Left, Right
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Name: MM SDP102
• Manufacturer: MAGNETI MARELLI

• Fitting Position: inner, Front
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Supplementary Article/Supplementary Info: with seal
• Name: Parking sensor
• Quality class: PJ

Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)

• Fitting Position: Left, Right, Front, outer, Rear, inner
• Construction Year from: 06.2007
• Construction Year to: 09.2008
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with seal
• Number of connectors: 3
• Chemical Properties: Paintable
• Quality class: PJ
• Name: Parking sensor

• Fitting Position: outer, Rear, Front
• Vehicle type: AOBC
• Construction Year from: 09.2008
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with seal
• Number of connectors: 3
• Chemical Properties: Paintable
• Quality class: PJ
• Name: Parking sensor

• Fitting Position: inner, Left, Right, Rear, Front
• Construction Year from: 09.2008
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with seal
• Number of connectors: 3
• Chemical Properties: Paintable
• Quality class: PJ
• Name: Parking sensor

• Construction Year from: 09.2010
• Construction Year to: 03.2012
• Fitting Position: Left, Right
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: MAGNETI MARELLI

• Construction Year to: 09.2008
• Fitting Position: Front
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: MAGNETI MARELLI

• Engine Code: AOBC, AOBA
• Fitting Position: inner, Front
• Construction Year to: 09.2008
• Chemical Properties: Paintable
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: AOBC, AOBA
• Fitting Position: Rear
• Construction Year to: 08.2008
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Colour: black
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: AOBC
• Fitting Position: outer, Rear, Front
• Construction Year from: 09.2010, 09.2008
• Construction Year to: 03.2012
• Block Separation:
• Colour: black
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: AOBC, AOBA
• Fitting Position: inner, Front
• Construction Year from: 09.2008
• Colour: black
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: AOBC
• Fitting Position: Rear, inner
• Construction Year from: 08.2008, 09.2010
• Construction Year to: 09.2010
• Block Separation:
• Chemical Properties: Paintable
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Manufacturer: TOPRAN
• Lisainfo: 304 777 HP
• Additional information: 304 777 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear
• Diameter [mm]: 16
• Manufacturer: FAST

• Fitting Position: outer, Rear, Front
• Construction Year from: 09.2008
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of connectors: 3
• Chemical Properties: Paintable
• Housing Colour: black
• Weight [kg]: 0.14
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Left Front, Right Front
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Chemical Properties: Paintable
• Height [mm]: 5.9
• Housing Colour: black
• Manufacturer: ERA

• Fitting Position: inner, both sides, Front, Rear
• Number of pins: 3
• Manufacturer: FAE

• Fitting Position: Front, inner
• Number of pins: 3
• Surface: primed
• Sensor Type: Ultrasonic Sensor
• Manufacturer: AIC

Installation Information: Attention, test the sensor for function before painting. General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year from: 09.2008
• Quantity: 2
• Fitting Position: inner, Left, Right, Front, Rear
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of connectors: 3
• Chemical Properties: Paintable
• Housing Colour: black
• Weight [kg]: 0.14
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 06.2007
• Construction Year to: 09.2008
• Fitting Position: outer, inner, Left, Right, Front, Rear
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Length [mm]: 41
• Width [mm]: 22
• Height [mm]: 25.3
• Number of pins: 3
• Diameter [mm]: 15.5
• Weight [kg]: 0.03
• Manufacturer: VALEO
• Additional information: 890017 VAL
• Lisainfo: 890017 VAL

• Fitting Position: Front, outer, Rear
• Production date from: 01.09.2008, 06.09.2010
• Block Separation:
• Production date to: 07.03.2012
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Manufacturer: METZGER

• Construction Year from: 09.2008
• Construction Year to: 08.2010
• Quantity: 4
• Fitting Position: both sides, Front, Rear
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Surface: primed
• Number of connectors: 3
• Chemical Properties: Paintable
• Housing Colour: black
• Weight [kg]: 0.017
• Manufacturer: VEMO
• Lisainfo: V25-72-0102 VEM
• Additional information: V25-72-0102 VEM

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 09.2008
• Fitting Position: Front, outer
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of connectors: 3
• Chemical Properties: Paintable
• Housing Colour: black
• Weight [kg]: 0.14
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 08.2008
• Construction Year to: 12.2014
• Fitting Position: Front, outer, inner, Left, Right, Rear
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Length [mm]: 41
• Width [mm]: 22
• Height [mm]: 29.2
• Number of pins: 3
• Diameter [mm]: 16.1
• Weight [kg]: 0.03
• Manufacturer: VALEO
• Name: VA 890009

• Construction Year from: 06.2007
• Construction Year to: 09.2008
• Fitting Position: inner, Left, Right, Front, Rear
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Length [mm]: 31
• Width [mm]: 22
• Height [mm]: 35.9
• Number of pins: 3
• Diameter [mm]: 15.5
• Weight [kg]: 0.03
• Manufacturer: VALEO
• Name: VA 890012
• Additional information: 890012 VAL
• Lisainfo: 890012 VAL

• Construction Year from: 09.2008
• Construction Year to: 12.2014
• Fitting Position: outer, inner, Left, Right, Front, Rear
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: not paintable
• Length [mm]: 41
• Width [mm]: 22
• Height [mm]: 26.3
• Number of pins: 3
• Diameter [mm]: 15.5
• Weight [kg]: 0.03
• Manufacturer: VALEO
• Name: VA 890011
• Additional information: 890011 VALEO
• Lisainfo: 890011 VALEO

• Construction Year from: 09.2008
• Construction Year to: 08.2010
• Required quantity: 4
• Fitting Position: both sides, Rear
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: Plugged
• Socket colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with fastening ring
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PX358141281

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 09.2008
• Required quantity: 2
• Fitting Position: both sides, inner, Front
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: Plugged
• Socket colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with fastening ring
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PX358141471
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 06.2007
• Construction Year to: 09.2008
• Fitting Position: Front, Left, Right, inner, outer, Rear
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of connectors: 3
• Chemical Properties: Paintable
• Weight [kg]: 0.14
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Weight [kg]: 0.015
• Fitting Position: Front, inner
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Name: Bumper reinforcement
• Quality class: P

Lisainfo: MONDEO, 03.07- (kvaliteediklass PJ)