• Fitting Position: outer, Rear, Lower, Rear Axle both sides
• Control/Trailing Arm Type: for control arm
• Block Separation:
• Weight [kg]: 0.102
• Spanner Size: 17
• Thread Size: M12X1.75
• Thread Length [mm]: 44
• Surface: Zinc-coated
• Screw length below head [mm]: 81
• Quality/ Grade: 10.9
• Required quantity: 2
• Name: Kruvi, ootshoob
• Manufacturer: TED
• Additional information: 00228320
• Lisainfo: 00228320

• Screw length below head [mm]: 50
• Surface: Zinc-coated
• Control/Trailing Arm Type: for trailing arm
• Weight [kg]: 0.135
• Spanner Size: 18
• Supplementary Article/Info 2: with protect screen
• Required quantity: 4
• Fitting Position: Front, Rear Axle
• Quality/ Grade: 10.9
• Thread Length [mm]: 47
• Thread Size: M14X2
• Manufacturer: TED
• Additional information: TEDTED50696
• Lisainfo: TEDTED50696

Name: —RUBA WAHACZA FORD T. MONDEO, GALAXY 06- (1 SZTUKA)

• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
FORD MONDEO 07-
(kvaliteediklass: PJ)"

• Control/Trailing Arm Type: Trailing Arm
• Quantity Unit: Set
• Fitting Position: Upper, Front, Rear Axle Left, Rear Axle Right
• Length from [mm]: 195
• Rod/Strut: Push Rod
• Name: Control arm left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
FORD MONDEO, 07-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
FORD MONDEO, 07-
(kvaliteediklass: PJ)"

• Supplementary Article/Info 2: with washers
• Fitting Position: Rear Axle, Front
• Screw length below head [mm]: 60
• Required quantity: 2
• Surface: Zinc-coated
• Spanner Size: 18
• Number of Parts [parts]: 2
• Thread Size: M14X2
• Quality/ Grade: 10.9
• Thread Length [mm]: 44
• Weight [kg]: 0.27
• Control/Trailing Arm Type: for trailing arm
• Manufacturer: TED

Name: ZESTAW —RUB WAHACZA FORD T. MONDEO, GALAXY 06- (2 SZTUKI) ZESTAW NA JEDN¤ STRON¨

• Block Separation:
• Thread Length [mm]: 34
• Control/Trailing Arm Type: for control arm
• Supplementary Article/Info 2: with protect screen
• Required quantity: 2
• Thread Size: M12X1.75
• Weight [kg]: 0.12
• Screw length below head [mm]: 71
• Surface: Zinc-coated
• Spanner Size: 15
• Quality/ Grade: 10.9
• Name: TG TED93340
• Manufacturer: TEDGUM

Fitting Position: outer, inner, Upper, Lower, Front, Rear Axle both sides

• Control/Trailing Arm Type: Trailing Arm
• Fitting Position: Rear Axle, Lower
• Length [mm]: 195
• Manufacturer: KAMOKA

• Control/Trailing Arm Type: Trailing Arm
• Fitting Position: Rear Axle, both sides
• Material: Sheet Steel
• Name: Roolimine - K„„ndmik FORD T. MONDEO/GALAXY 06-
• Manufacturer: MAX

• Control/Trailing Arm Type: Trailing Arm
• Fitting Position: Rear Axle, Lower
• Axle alignment required after fitting:
• Article number of the recommended special tool: V99-1020
• Material: Sheet Steel
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle, behind the axle, both sides
• Material: Sheet Steel
• Control/Trailing Arm Type: Semi-Trailing Arm
• Supplementary Article/Info 2: without ball joint
• Length [mm]: 252
• Width [mm]: 55
• Height [mm]: 35
• Manufacturer: DELPHI
• Name: DE TC2160

• Fitting Position: Rear Axle Left, Rear Axle Right
• Control/Trailing Arm Type: Control Arm
• Length [mm]: 195
• Material: Steel
• Weight [kg]: 1.5
• Name: DY 26-21757
• Manufacturer: DYS

• Production date from: 06/03/06
• Production date to: 08/04/15
• Control/Trailing Arm Type: Triangular Control Arm (CV)
• Fitting Position: Rear Axle, Front, Lower
• for OE number: 1426770
• Manufacturer: SASIC

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle
• Length [mm]: 195
• Inner Diameter [mm]: 12
• Name: ALT 86289AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle Left, Rear Axle Right
• Control/Trailing Arm Type: Control Arm
• Manufacturer: GSP

• Fitting Position: Rear Axle both sides
• Control/Trailing Arm Type: Trailing Arm
• Length [mm]: 195
• Diameter 2 [mm]: 12.2
• Manufacturer: OYODO

• Fitting Position: Rear Axle, Upper
• Control/Trailing Arm Type: Semi-Trailing Arm
• Length [mm]: 194.5
• Net weight [kg]: 0.63
• Name: Roolimine - K„„ndmik FORD T. MONDEO/GALAXY 06-
• Manufacturer: NK

• Block Separation:
• Control/Trailing Arm Type: for control arm
• Quality/ Grade: 10.9
• Thread Length [mm]: 34
• Thread Size: M12X1.75
• Screw length below head [mm]: 71
• Required quantity: 1
• Surface: Zinc-coated
• Spanner Size: 15
• Weight [kg]: 0.24
• Supplementary Article/Info 2: with protect screen
• Manufacturer: TED

Fitting Position: outer, inner, Upper, Lower, Front, Rear Axle both sides Name: ZESTAW —RUB WAHACZA FORD T. GALAXY II (WA6) (4 SZTUKI)

• Fitting Position: Rear Axle both sides
• Control/Trailing Arm Type: Control Arm
• Manufacturer: METALCAUCHO

• Fitting Position: Lower, Rear Axle Right, Rear Axle Left
• Control/Trailing Arm Type: Control Arm
• Manufacturer: CORTECO
• Name: COC 49398517

• Fitting Position: Lower, Rear Axle Left, Front, Rear Axle Right
• Control/Trailing Arm Type: Semi-Trailing Arm
• Supplementary Article/Info 2: with rubber mount
• Material: Sheet Steel
• Length [mm]: 195
• replacement in pairs recommended:
• Required quantity: 2
• Name: Roolimine - K„„ndmik FORD T. MONDEO/GALAXY 06-
• Manufacturer: MEY
• Lisainfo: 7160500019
• Additional information: 7160500019

• Fitting Position: Rear Axle both sides
• Control/Trailing Arm Type: Trailing Arm
• Length [mm]: 195
• Diameter 2 [mm]: 12.2
• Manufacturer: PROFIPOWER

• Fitting Position: Rear Axle, Lower, Front
• Control/Trailing Arm Type: Trailing Arm
• Material: Sheet Steel
• Length [mm]: 195
• SVHC: No SVHC present!
• Name: Ootshoob, k„„ndmik
• Manufacturer: FAG

• Fitting Position: Rear Axle both sides, Lower, Front
• Required quantity: 2
• paired article number: VKDS 424008
• Length [mm]: 195
• Bore Diameter [mm]: 12.2
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: without ball joint
• Manufacturer: SKF
• Name: SK VKDS424008

• Supplementary Article/Info 2: with rubber mount, without ball joint
• Material: Steel
• Length [mm]: 195
• Control/Trailing Arm Type: Control Arm
• as standard:
• paired article number: 211059
• Weight [kg]: 0.573
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

Fitting Position: behind the axle, Rear Axle Left, Rear Axle Right, outer, Upper

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle, Upper
• Length [mm]: 333
• Inner Diameter [mm]: 12
• Name: ALT 88864AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle
• Weight [kg]: 0.61
• Control/Trailing Arm Type: Control Arm
• Rod/Strut: Suspension Rod
• Packaging length [cm]: 25.8
• Packaging width [cm]: 6
• Packaging height [cm]: 4.2
• Manufacturer: FEBEST

• Fitting Position: Rear Axle both sides
• Control/Trailing Arm Type: Trailing Arm
• Diameter 2 [mm]: 12.2
• Length [mm]: 195
• Weight [kg]: 0.567
• Manufacturer: RTS

• Control/Trailing Arm Type: Trailing Arm
• Fitting Position: Rear Axle, both sides
• Material: Sheet Steel
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer! Name: Roolimine - K„„ndmik FORD T. MONDEO/GALAXY 06- LE/PR

• Fitting Position: Rear Axle Left, outer, Rear, Left, Upper, Right
• Suspension: for vehicles with height-adjustable suspension
• Material: Steel
• Control/Trailing Arm Type: Semi-Trailing Arm
• Supplementary Article/Info 2: without ball joint
• Length [mm]: 380
• Width [mm]: 119
• Height [mm]: 35
• Manufacturer: DELPHI
• Name: DE TC2619

• Fitting Position: Centre, Rear Axle Right, Rear Axle Left
• Control/Trailing Arm Type: Trailing Arm
• Manufacturer: CORTECO
• Name: COC 49398804

• Fitting Position: Rear Axle Left, Rear Axle Right, outer
• Control/Trailing Arm Type: Control Arm
• Suspension: for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Control/Trailing Arm Type: Control Arm
• Manufacturer: MAGNETI MARELLI

• Control/Trailing Arm Type: Control Arm
• Quantity Unit: Set
• Fitting Position: Rear Axle Left, Rear Axle Right
• Length from [mm]: 560
• Material: Sheet Steel
• Rod/Strut: Push Rod
• Name: Control arm left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle Left, Rear Axle Right
• Control/Trailing Arm Type: Control Arm

• Fitting Position: outer, Upper, Rear Axle, Left, Right
• Material: Steel
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint
• Length [mm]: 379
• Width [mm]: 172
• Height [mm]: 35
• Name: WAHACZ FORD T. GALAXY, S-MAX 06- LE/PR
• Manufacturer: DLP

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Right, Lower
• Length [mm]: 330
• Inner Diameter [mm]: 12
• paired article number: 92983AL
• Name: ALT 92984AL
• Manufacturer: ALTE AUTOMOTIVE

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Left, Upper
• Length [mm]: 330
• Inner Diameter [mm]: 12
• paired article number: 92984AL
• Name: ALT 92983AL
• Manufacturer: ALTE AUTOMOTIVE

• Length [mm]: 331
• Material: Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: outer, Rear Axle Left, Rear Axle Right
• Weight [kg]: 2.555
• Supplementary Article/Supplementary Info: with rubber-metal mounts
• Observe service information:
• Name: Stabilisaator,k„„ndmik
• Manufacturer: FEB

Braking/Driving Dynamics: for vehicles without Continuously Controlled Damping (CCD) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 331
• Material: Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: outer, Rear Axle Left, Rear Axle Right
• Weight [kg]: 2.555
• Supplementary Article/Supplementary Info: with rubber-metal mounts
• Name: SW 33 10 4480
• Manufacturer: SWAG

Braking/Driving Dynamics: for vehicles without Continuously Controlled Damping (CCD) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Control/Trailing Arm Type: Semi-Trailing Arm
• Required quantity: 2
• Name: Ootshoob, k„„ndmik
• Manufacturer: MAX

Fitting Position: Rear Axle, Left, Right, Lower, outer, Rear Axle Lower

• Fitting Position: Rear Axle, outer, Lower, behind the axle
• Control/Trailing Arm Type: Trailing Arm
• Manufacturer: KAVO PARTS

• Fitting Position: Rear Axle Left, Rear Axle Right, Lower, outer
• Control/Trailing Arm Type: Control Arm
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Rear Axle, Lower
• Control/Trailing Arm Type: Semi-Trailing Arm
• Net weight [kg]: 4.1
• Name:
• Manufacturer: NK

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle
• Length [mm]: 560
• Inner Diameter [mm]: 12
• Name: ALT 90558AL
• Manufacturer: ALTE AUTOMOTIVE

• Vehicle Equipment: for vehicles without level control
• Block Separation:
• Production date from: 12.12.2006
• Suspension: for vehicles without electronic suspension control
• Fitting Position: Rear Axle Left, Rear Axle Right, Upper
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with rubber mount
• Required quantity: 2
• Guarantee: 3 years guarantee or up to 75,000km
• Manufacturer: METZGER

• Name: Control arm left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
FORD MONDEO, 07-
(kvaliteediklass: PJ)"

• Track rollers material: Metal
• Inner Diameter [mm]: 12
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 4.1
• Supplementary Article/Supplementary Info: with rubber mounts
• Observe service information:
• Name: Ootshoob, k„„ndmik
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Height [mm]: 82
• Control/Trailing Arm Type: Trailing Arm
• Fitting Position: Rear Axle
• Material: Rubber/Metal, Sheet Steel
• Axle alignment required after fitting:
• Article number of the recommended special tool: V99-1020
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear, Rear Axle Right, Rear Axle Left
• Control/Trailing Arm Type: Control Arm
• Material: Sheet Steel
• Name: COC 49104996
• Manufacturer: CORTECO

• Fitting Position: Rear Axle, Lower, outer
• Article number of recommended accessories: 8500 16402
• Control/Trailing Arm Type: Semi-Trailing Arm
• Required quantity: 2
• Manufacturer: TRI
• Lisainfo: FORD
• Additional information: FORD

Technical Information: "See accessories list for bolt kit, bolts are not included" Name: Roolimine - K„„ndmik FORD T. MONDEO IV/S-MAX/GALAXY III 06- DOLNY-NO—NY SPR¨½YNY LE/PR

• Track rollers material: Metal
• Inner Diameter [mm]: 12
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 4.1
• Supplementary Article/Supplementary Info: with rubber mounts
• Name: SW 33 10 2972
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, both sides
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Length [mm]: 195
• Inner Diameter [mm]: 12
• Manufacturer: OYODO

• Control/Trailing Arm Type: Control Arm
• Quantity Unit: Set
• Fitting Position: Lower, Front Axle Right
• Cone Size [mm]: 18
• Material: Sheet Steel
• Rod/Strut: Push Rod
• Quality class: PJ
• Name: Control arm right

Lisainfo: "Tootja: SRL
FORD MONDEO, 07-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
FORD MONDEO, 07-
(kvaliteediklass: PJ)"

• Control/Trailing Arm Type: Control Arm
• Quantity Unit: Set
• Fitting Position: Lower, Front Axle Left
• Cone Size [mm]: 18
• Material: Sheet Steel
• Rod/Strut: Push Rod
• Quality class: PJ
• Name: Control arm left

Lisainfo: "Tootja: SRL
FORD MONDEO, 07-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
FORD MONDEO, 07-
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle, both sides
• Control/Trailing Arm Type: Semi-Trailing Arm
• Weight [kg]: 4.132
• Required quantity: 2
• Packaging length [cm]: 63
• Packaging width [cm]: 21
• Packaging height [cm]: 8.5
• Manufacturer: MONROE

• Fitting Position: Rear Axle, both sides
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Length [mm]: 195
• Inner Diameter [mm]: 12
• Manufacturer: PROFIPOWER

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle, Left
• Material: Sheet Steel
• paired article number: 72-3571
• Name: Ootshoob, k„„ndmik
• Manufacturer: MAX

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle, Right
• Material: Sheet Steel
• paired article number: 72-3570
• Name: Ootshoob, k„„ndmik
• Manufacturer: MAX

• Fitting Position: Front Axle Right, Lower
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint
• Lisainfo: Track Control Arm
• Additional information: Track Control Arm

• Fitting Position: Front Axle Left, Lower
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint
• Lisainfo: Track Control Arm
• Additional information: Track Control Arm

• Fitting Position: Rear Axle, Lower
• Control/Trailing Arm Type: Control Arm
• Material: Sheet Steel
• Supplementary Article/Info 2: with rubber mount
• Length [mm]: 560
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Front Axle Left, Lower
• paired article number: 5012568
• Control/Trailing Arm Type: Control Arm
• Net weight [kg]: 6.25
• Manufacturer: NK

Name: Roolimine - K„„ndmik FORD P. MONDEO/S-MAX/GALAXY 07- LE

• Fitting Position: Front Axle Right, Lower
• paired article number: 5012569
• Control/Trailing Arm Type: Control Arm
• Net weight [kg]: 6.46
• Manufacturer: NK

Name: Roolimine - K„„ndmik FORD P. MONDEO/S-MAX/GALAXY 07- PR

• Fitting Position: Rear Axle
• Control/Trailing Arm Type: Trailing Arm
• General Information: Lateral arm / Silent Block (x2)
• Manufacturer: KYB

• Control/Trailing Arm Type: Control Arm
• Material: Sheet Steel
• Fitting Position: Front Axle Right
• Control/Trailing Arm Design: Triangular Control Arm
• Supplementary Article/Info 2: with nut, with ball joint, with rubber mount
• Supplementary Article/Supplementary Info: with holder
• Surface: painted black, Cathodic Painting
• paired article number: 304 084
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right, Lower
• Cone Size [mm]: 18
• paired article number: 9050097
• Manufacturer: KAMOKA

• Control/Trailing Arm Type: Control Arm
• Material: Sheet Steel
• Fitting Position: Front Axle Left
• Control/Trailing Arm Design: Triangular Control Arm
• Supplementary Article/Info 2: with rubber mount, with ball joint, with nut
• Supplementary Article/Supplementary Info: with holder
• Surface: painted black, Cathodic Painting
• paired article number: 304 083
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Lower, Front Axle Left
• Axle alignment required after fitting:
• paired article number: V25-0218
• External Thread [mm]: M14x1,5
• Article number of the recommended special tool: V99-1020
• Material: Sheet Steel
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Lower, Front Axle Left
• paired article number: S060473
• Cone Size [mm]: 18
• Control/Trailing Arm Type: Control Arm
• Thread Size 1: M14X1,5
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Front Axle Right, Lower
• paired article number: S060472
• Cone Size [mm]: 18
• Control/Trailing Arm Type: Control Arm
• Thread Size 1: M14X1,5
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Front Axle Right, outer, Lower
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joints
• paired article number: SCA-10266
• Manufacturer: KAVO PARTS

• Control/Trailing Arm Type: Control Arm
• Base body material: Steel
• Fitting Position: Front Axle Right
• Net weight [kg]: 6.54
• Thread Size: RHT M14x1,5
• Thread Size 1: RHT M14x1,5
• paired article number: G40.4497/C
• Supplementary Article/Info 2: with ball joint
• Name: OMG G40.4496/C
• Manufacturer: OMG

• Fitting Position: outer, Front Axle Left, Lower
• Material: Sheet Steel
• paired article number: TC2159
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint
• Length [mm]: 535
• Width [mm]: 390
• Height [mm]: 125
• Manufacturer: DELPHI
• Name: DE TC2158

• Fitting Position: outer, Front Axle Right, Lower
• Material: Sheet Steel
• paired article number: TC2158
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint
• Length [mm]: 535
• Width [mm]: 390
• Height [mm]: 125
• Manufacturer: DELPHI
• Name: DE TC2159

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right
• Cone Size [mm]: 21.5
• Cone Pitch: 1:6
• Material: Sheet Steel
• paired article number: JTC2215
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left
• Cone Size [mm]: 21.5
• Cone Pitch: 1:6
• Material: Sheet Steel
• paired article number: JTC2216
• Manufacturer: TRW ZAWIESZENIE

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Right
• Control/Trailing Arm Design: Triangular Control Arm
• paired article number: VKDS 324009 B
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Hydro Mount
• Supplementary Article/Supplementary Info: with synthetic grease
• Supplementary Article/Info 2: with ball joint
• Thread Size 1: M14 x 1,5
• Manufacturer: SKF
• Name: SK VKDS324008B

• Fitting Position: Front Axle Left
• Control/Trailing Arm Design: Triangular Control Arm
• paired article number: VKDS 324008 B
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Hydro Mount
• Supplementary Article/Supplementary Info: with synthetic grease
• Supplementary Article/Info 2: with ball joint
• Thread Size 1: M14 x 1,5
• Manufacturer: SKF
• Name: SK VKDS324009B

• Fitting Position: Front Axle Right
• paired article number: KSC4035
• Control/Trailing Arm Type: Trailing Arm
• General Information: Control arm / Silent Block (x2) / Ball joint (x1)
• Manufacturer: KYB

• Fitting Position: Front Axle
• Control/Trailing Arm Type: Control Arm
• Weight [kg]: 6.6
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 04SKV062

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right
• Thread Size: M14 x 1,5
• Cone Size [mm]: 22
• Inner Diameter [mm]: 14
• paired article number: 84758AL
• Name: ALT 84757AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle
• Control/Trailing Arm Type: Control Arm
• Weight [kg]: 6.8
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 04SKV061

• paired article number: 34583
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right, Lower
• Weight [kg]: 6.515
• Supplementary Article/Supplementary Info: with lock nut, with rubber mounts
• Supplementary Article/Info 2: with ball joint
• Observe service information:
• Name: Roolimine - K„„ndmik FORD P. MONDEO 07- PR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.