Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Construction Year to: 02.2006
-
Fitting Position: Front Axle Left,
Front Axle Right, Lower - Supplementary Article/Supplementary Info: with accessories
- Manufacturer: JP GROUP
-
Lisainfo: Ball joint,
left/ right
koonus 18 mm -
Additional information: Ball joint,
left/ right
koonus 18 mm
-
Fitting Position: Front Axle,
Lower - Supplementary Article/Supplementary Info: with accessories
- Cone Size [mm]: 18
-
for OE number: B32H-
34- 250E - Manufacturer: KAMOKA
-
Fitting Position: Front Axle,
Lower -
Supplementary Article/Info 2: with bolts/
screws - Cone Size [mm]: 15
- Manufacturer: KAMOKA
-
Fitting Position: Front Axle,
Lower -
Supplementary Article/Info 2: with bolts/
screws - Cone Size [mm]: 18
- Manufacturer: KAMOKA
- Läbimõõt [mm]: 18
-
Seerianumber: ZSD-
FR- 002 - Manufacturer: NTY
Installatsiooni pool: Esisild, väljas, esisild vasakul, esisild paremal, all
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Lower,
Front Axle Left, Front Axle Right - Cone Size [mm]: 18
-
Thread Size 1: M14X1,
5 - Manufacturer: GSP ZAWIESZENIE
-
Fitting Position: Front Axle Left,
Front Axle Right, outer, Lower - Construction Year to: 02.2006
- Thread Size 1: M14X1.5 RHT
- Cone Size [mm]: 15
- paired article number: 220435
- Weight [kg]: 0.693
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
-
Fitting Position: Front Axle Left,
Front Axle Right, outer, Lower - Construction Year from: 03.2006
- Thread Size 1: M14X1.5 RHT
- Cone Size [mm]: 18
- paired article number: 220465
- Weight [kg]: 0.643
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
-
Fitting Position: Lower,
Front Axle Left, Front Axle Right - Cone Size [mm]: 15
-
Thread Size 1: M14X1,
5 - Manufacturer: GSP ZAWIESZENIE
-
Fitting Position: Front Axle,
outer, Lower - Thread Size: M14x1.5
- Length [mm]: 125
- Width [mm]: 70
- Height [mm]: 98
- Manufacturer: DELPHI
- Additional information: TC1433 DELPHI
- Lisainfo: TC1433 DELPHI
- Construction Year to: 09.2006
-
Installatsiooni pool: all,
esisild vasakul, esisild paremal -
pikkus [mm]: 87,
8 - Keermemõõt: M14X1.5
- Poldi läbimõõt [mm]: 18
- Quality class: PJ
- Name: Control arm ball joint left=right
- Construction Year to: 02.2006
-
Fitting Position: Front Axle,
Lower, both sides - Cone Size [mm]: 18
-
Thread Size: M14x1,
5 - Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Construction Year to: 02.2006
-
Fitting Position: Front Axle,
Lower - Manufacturer: CORTECO
- Name: COC 49398692
- Installatsiooni pool: Esisild
-
koonusemõõt (mm): 15,
1 - Keermemõõt: M14 x 1.5
-
Läbimõõt,kinnituspunktid (mm): 10,
5 - Name: ALT 82654AL
- Manufacturer: ALTE AUTOMOTIVE
- Construction Year to: 02.2006
-
Fitting Position: Lower,
Front Axle both sides - Required quantity: 2
-
Cone Size [mm]: 18,
15 - paired article number: VKDS 314011
- Cone Size 2 [mm]: 18.8
- Supplementary Article/Supplementary Info: with synthetic grease
-
Thread Size 1: M14 x 1,
5 - Manufacturer: SKF
-
Installatsiooni pool: esisild vasakul,
esisild paremal, all - Keermemõõt: M14X1.5RHT
- koonusemõõt (mm): 15
- Manufacturer: FAST
- Construction Year from: 03.2006
-
Fitting Position: Lower,
Front Axle Right, Front Axle Left - Cone Size [mm]: 21
-
Supplementary Article/Info 2: with bolts/
screws - Name: COC 49398451
- Manufacturer: CORTECO
-
Fitting Position: Front Axle Left,
Front Axle Right - Control/Trailing Arm Type: for control arm
-
Fastening Type: 3-
point attachment - Weight [kg]: 0.73
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Production date from: 200712
- Production date to: 201107
- Fitting Position: Lower Front Axle
- Weight [kg]: 0.765
- Bolt Head Diameter [mm]: 18
- Packaging length [cm]: 12.6
- Packaging width [cm]: 8.4
- Packaging height [cm]: 7.1
- Manufacturer: FEBEST
- Fitting Position: Lower Front Axle
- Weight [kg]: 0.716
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Installatsiooni pool: Esisild
-
koonusemõõt (mm): 18,
1, 21, 8 - Keermemõõt: M14 x 1.5
-
Läbimõõt,kinnituspunktid (mm): 10,
5 - Name: ALT 83724AL
- Manufacturer: ALTE AUTOMOTIVE
-
Fitting Position: Front Axle,
outer, Lower - Thread Size: M14x1.5
- Length [mm]: 125
- Width [mm]: 71
- Height [mm]: 94
- Manufacturer: DELPHI
- Construction Year from: 02.2006
-
Fitting Position: Lower,
Front Axle both sides - Required quantity: 2
-
Cone Size [mm]: 21,
17.8 - paired article number: VKDS 314002
-
Thread Size: M14x1,
5 - Cone Size 1 [mm]: 21.8
- Supplementary Article/Supplementary Info: with synthetic grease
- Manufacturer: SKF ZAWIESZENIE
- Construction Year from: 03.2006
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle,
Lower, both sides - Cone Size [mm]: 21
-
Thread Size: M14x1,
5 - Manufacturer: TRW
- Additional information: JBJ740 TRW
- Lisainfo: JBJ740 TRW
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Construction Year to: 01.2006
- Cone Size [mm]: 15
- SVHC: No SVHC present!
- Manufacturer: FAG
-
External Thread Size: M14 x 1,
5 - Cone Size [mm]: 18
- Mounting points diameter [mm]: 10.5
- Control/Trailing Arm Type: for control arm
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.718
- Supplementary Article/Info 2: with fastening material
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Construction Year from: 03.2006
- Cone Size [mm]: 18
- SVHC: No SVHC present!
- Manufacturer: FAG
-
External Thread Size: M14 x 1,
5 - Cone Size [mm]: 21
- Mounting points diameter [mm]: 10.5
- Control/Trailing Arm Type: for control arm
-
Fitting Position: Front Axle Left,
Lower, Front Axle Right - Weight [kg]: 0.705
- Supplementary Article/Info 2: with fastening material
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 02.2006
-
Fitting Position: Front Axle,
Lower, both sides - Cone Size [mm]: 18
-
Thread Size: M14x1,
5 - Article number of recommended accessories: 38047 01
- Manufacturer: LEMFORDER
- Production date from: 200712
- Production date to: 201107
-
Fitting Position: Lower Front Axle,
Rear Axle, outer - Weight [kg]: 0.755
- Bolt Head Diameter [mm]: 21
- Packaging length [cm]: 12.5
- Packaging width [cm]: 9.5
- Packaging height [cm]: 7.2
- Manufacturer: FEBEST
- Weight [kg]: 0.7
- Required quantity: 2
- Cone Size [mm]: 21
- Packaging length [cm]: 13.5
- Packaging width [cm]: 9.5
- Packaging height [cm]: 7
- Manufacturer: MONROE
Fitting Position: Front Axle, Front Axle Left, Front Axle Right, outer, Lower
- Construction Year from: 03.2006
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle,
Lower, both sides - Cone Size [mm]: 21
-
Thread Size: M14x1,
5 - Article number of recommended accessories: 38047 01
- Manufacturer: LEMFÖRDER
- Construction Year from: 03.2006
-
Installatsiooni pool: all,
Esisild, kahepoolne - Roolimisliik: Õõtshoob
-
Keermemõõt: M14x1,
5 - koonusemõõt (mm): 21
- Manufacturer: PROFIPOWER
-
Installatsiooni pool: all,
Esisild, kahepoolne -
Keermemõõt: M14x1,
5 - koonusemõõt (mm): 18
- Manufacturer: PROFIPOWER
- Weight [kg]: 0.8
- Required quantity: 2
- Cone Size [mm]: 18
- Packaging length [cm]: 13.5
- Packaging width [cm]: 9.5
- Packaging height [cm]: 7
- Manufacturer: MONROE
Fitting Position: Front Axle, Front Axle Left, Front Axle Right, outer, Lower
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks