• Fitting Position: Rear Axle Lower, inner, Lower
• Height [mm]: 35
• Inner Diameter [mm]: 12.3
• Outer Diameter [mm]: 32.3
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Fabrication Number: ZTT-MZ-007A
• Manufacturer: NTY

• Production date from: 201410
• Weight [kg]: 0.084
• Packaging length [cm]: 7.6
• Packaging width [cm]: 2.4
• Packaging height [cm]: 2.4
• Length [mm]: 76
• Thread Size: M12x1,75
• Manufacturer: FEBEST

• Fitting Position: Rear Axle Left, Rear Axle Right, Upper
• Width [mm]: 35
• Height [mm]: 35
• Height 1 [mm]: 35.2
• Outer Diameter 1 [mm]: 36.3
• Inner Diameter 1 [mm]: 12.3
• Manufacturer: GSP ZAWIESZENIE

• Required quantity: 2
• Fitting Position: Rear, inner, Rear Axle Lower
• Control/Trailing Arm Type: for control arm
• Outer Diameter 1 [mm]: 32.2
• Outer Diameter 2 [mm]: 32.9
• Weight [kg]: 0.152
• Inner Diameter [mm]: 12
• Manufacturer: TEDGUM_TD
• Additional information: 00224452
• Lisainfo: 00224452

• Fitting Position: Rear Axle Lower, outer, Lower
• Width [mm]: 36
• Height [mm]: 36
• Height 1 [mm]: 45
• Outer Diameter 1 [mm]: 36.4
• Inner Diameter 1 [mm]: 12.3
• Manufacturer: GSP

• Fitting Position: outer, Rear Axle, inner, Left, Right, Lower
• Weight [g]: 102
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 32
• Name: IM 1435
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
FORD FOCUS
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
FORD FOCUS
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle Lower, outer, Lower
• Height [mm]: 55
• Inner Diameter [mm]: 12.3
• Outer Diameter [mm]: 32.7
• Manufacturer: GSP

• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.145
• Required quantity: 2
• Inner Diameter [mm]: 12
• Fitting Position: Rear Axle Lower, both sides, Rear, outer
• Outer Diameter [mm]: 36.3
• Manufacturer: TEDGUM
• Additional information: 00224453
• Lisainfo: 00224453

• Fitting Position: outer, Rear Axle Lower
• Height [mm]: 45
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36
• Control/Trailing Arm Type: Trailing Arm
• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Control arm bush left=right

• Fitting Position: Rear Axle Lower, inner
• Height [mm]: 55
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 32
• Control/Trailing Arm Type: Trailing Arm
• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Control arm bush left=right

• Fitting Position: Front Axle, Rear Axle
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 32
• Height [mm]: 35
• Name: ALT 91242AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle, both sides
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.114
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36.4
• Required quantity: 4
• Manufacturer: TEDGUM
• Additional information: 00224288
• Lisainfo: 00224288

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
FORD FOCUS
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
FORD FOCUS
(kvaliteediklass: PJ)"

• Production date from: 201410
• Weight [kg]: 0.121
• Packaging length [cm]: 9.7
• Packaging width [cm]: 2.7
• Packaging height [cm]: 2.7
• Length [mm]: 98
• Thread Size: M14x2
• Manufacturer: FEBEST

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Control arm bush left=right

Lisainfo: "Tootja: TEKNOROT
VW T4 '91-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW T4 '91-
(kvaliteediklass: PJ)"

• Outer Diameter [mm]: 32.1
• Inner Diameter [mm]: 12
• Required quantity: 4
• Fitting Position: Front, inner, both sides, Rear Axle, outer
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.085
• Manufacturer: TEDGUM

• Production date from: 201412
• Fitting Position: Rear Axle Upper
• Weight [kg]: 0.142
• Packaging length [cm]: 3.7
• Packaging width [cm]: 3.7
• Packaging height [cm]: 3.6
• Manufacturer: FEBEST

• Thickness [mm]: 35
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 36
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.134
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle both sides
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36
• Height [mm]: 35
• Name: ALT 91241AL
• Manufacturer: ALTE AUTOMOTIVE

• Production date from: 201410
• Fitting Position: inner, Rear Axle Lower, in front of axle
• Weight [kg]: 0.115
• Packaging length [cm]: 3.5
• Packaging width [cm]: 3.5
• Packaging height [cm]: 3.5
• Manufacturer: FEBEST

• Fitting Position: Rear Axle Lower, inner, Lower, Rear Axle
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 32.3
• Length [mm]: 35
• Manufacturer: JAPKO

• Fitting Position: Rear Axle Lower, inner, Lower, Rear Axle
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 32.3
• Length [mm]: 35
• Manufacturer: ASHIKA

• Fitting Position: outer, Rear Axle, inner, Left, Upper, Right
• Material: Metal
• Control/Trailing Arm Type: for control arm
• Weight [g]: 124
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36
• Length [mm]: 28
• Overall Length [mm]: 35
• Name: IM 1205
• Manufacturer: ORIGINAL IMPERIUM

• Length from [mm]: 64.5
• Diameter [mm]: 38
• Inner Diameter [mm]: 14
• Quality class: PJ
• Name: Control arm bush left=right

Fitting Position: Lower, Front Axle, Left, Right, Front Axle Left, Front Axle Right

• Production date from: 201601
• Weight [kg]: 0.101
• Packaging length [cm]: 7.9
• Packaging width [cm]: 4
• Packaging height [cm]: 4
• Length [mm]: 79
• Thread Size: M10x1,5
• Manufacturer: FEBEST

• Fitting Position: Rear Axle both sides, Lower, outer
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 36.5
• Inner Diameter [mm]: 12.2
• Length [mm]: 45
• Weight [kg]: 0.164
• Manufacturer: RTS

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
MAZDA 3
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
MAZDA 3
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle both sides, Lower, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 37
• Height [mm]: 45
• Name: ALT 91244AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle, Centre
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.27
• Name: DY 37-09700-6
• Manufacturer: DYS

• Fitting Position: Front Axle, Lower, Front
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 38
• Height [mm]: 65
• Name: ALT 88833AL
• Manufacturer: ALTE AUTOMOTIVE

• Production date from: 201410
• for OE number: C273-34-300B, C273-34-350B
• Fitting Position: inner, Lower Front Axle, Front
• Weight [kg]: 0.285
• Packaging length [cm]: 6.5
• Packaging width [cm]: 5.4
• Packaging height [cm]: 5.4
• Manufacturer: FEBEST

• Fitting Position: Lower, Front, Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 334019
• Manufacturer: SKF ZAWIESZENIE

• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.282
• Fitting Position: inner, Rear Axle, Upper, outer, both sides
• Required quantity: 4
• Supplementary Article/Info 2: with screw
• Manufacturer: TEDGUM_TD

• Fitting Position: Lower, Lower Front Axle
• for OE number: 1 234 371
• Manufacturer: GSP

• Fitting Position: Rear Axle, Lower, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 33
• Height [mm]: 55
• Name: ALT 91245AL
• Manufacturer: ALTE AUTOMOTIVE

• Weight [kg]: 0.27
• Fitting Position: Front Axle both sides, Lower, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 38.2
• Inner Diameter [mm]: 14.2
• Length [mm]: 65
• Manufacturer: RTS

• Fitting Position: Rear Axle, Left, Right
• Weight [g]: 476
• Outer Diameter [mm]: 60
• Overall Length [mm]: 142
• Name: IM 1445
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle, Centre
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Manufacturer: CORTECO ZAWIESZENIE

• Fabrication Number: ZTT-FR-018A
• Manufacturer: NTY

Fitting Position: Rear Axle, Left, Right, Lower, in front of axle, outer

• Fitting Position: Rear Axle, Centre
• Outer Diameter [mm]: 60.3
• Manufacturer: GSP ZAWIESZENIE

• Weight [kg]: 0.37
• Fitting Position: both sides, Rear Axle, Front
• Control/Trailing Arm Type: for trailing arm
• Required quantity: 2
• Outer Diameter [mm]: 60
• Manufacturer: TEDGUM

• Production date from: 201410
• Fitting Position: Lower Front Axle, Rear
• Weight [kg]: 0.488
• Packaging length [cm]: 6.8
• Packaging width [cm]: 6.8
• Packaging height [cm]: 6.4
• Manufacturer: FEBEST

• Fitting Position: Rear Axle, Lower, in front of axle
• Manufacturer: DELPHI
• Name: DE TD1782W

• Outer Diameter [mm]: 60.2
• Length [mm]: 38.3
• paired article number: 271591
• Weight [kg]: 0.44
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: in front of axle, Rear Axle Right, Rear Axle Left, inner, Lower

• Fitting Position: Rear Axle both sides, inner, Front
• Required quantity: 2
• paired article number: VKDS 434012
• Height [mm]: 142
• Outer Diameter [mm]: 60.2
• Manufacturer: SKF ZAWIESZENIE

• Fitting Position: inner, Rear Axle, Upper, both sides, outer
• Colour: red
• Material: PU (Polyurethane)
• Required quantity: 4
• Weight [kg]: 0.125
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36.3
• Shore-A hardness value, base body: 80
• Supplementary Article/Info 2: with grease cap
• Manufacturer: TEDGUM_TD

• Production date from: 201412
• Fitting Position: Rear Axle Upper, Front
• Weight [kg]: 0.508
• Packaging length [cm]: 14.2
• Packaging width [cm]: 6.1
• Packaging height [cm]: 6.1
• Manufacturer: FEBEST

• Fitting Position: Rear Axle, Left, Right
• Material: Rubber/Metal
• Length [mm]: 142
• Outer Diameter [mm]: 60
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Shore-A hardness value, base body: 80
• Supplementary Article/Info 2: with grease cap
• Colour: red
• Fitting Position: Rear Axle, Front, inner, Lower, both sides, outer
• Material: PU (Polyurethane)
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 32.3
• Required quantity: 4
• Weight [kg]: 0.12
• Inner Diameter [mm]: 12
• Manufacturer: TEDGUM_TD

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 60.2
• SVHC: No SVHC present!
• Manufacturer: FAG-ELEMENTY ZAWIESZENIA

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Control arm bush left=right

Lisainfo: "Tootja: TEKNOROT
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
(kvaliteediklass: PJ)"

• Length [mm]: 142
• Outer Diameter [mm]: 60
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.451
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Control arm bush left

Lisainfo: "Tootja: TEKNOROT
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
(kvaliteediklass: PJ)"

• Fitting Position: Lower, Front Axle Right
• Manufacturer: GSP

• Fitting Position: Front Axle, Lower, Left
• Fabrication Number: ZTP-FR-010B
• Manufacturer: NTY

• Fitting Position: Rear Axle, outer, Front, in front of axle
• Weight [kg]: 0.587
• Required quantity: 2
• Control/Trailing Arm Type: Semi-Trailing Arm
• Packaging length [cm]: 13.5
• Packaging width [cm]: 9.5
• Packaging height [cm]: 7
• Manufacturer: MONROE

• Fitting Position: Lower, Front Axle Left
• Manufacturer: GSP

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Control arm bush right

Lisainfo: "Tootja: TEKNOROT
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
(kvaliteediklass: PJ)"

• Fitting Position: Left, Right, Front Axle
• Control/Trailing Arm Type: for control arm
• Mounting Type: Hydro Mount, Rubber-Metal Mount
• Weight [g]: 1,379
• Inner Diameter [mm]: 21
• Outer Diameter [mm]: 87
• Length [mm]: 93
• Name: IM 1443
• Manufacturer: ORIGINAL IMPERIUM

• Production date from: 201410
• Fitting Position: Lower Front Axle, Left
• Weight [kg]: 1.337
• Mounting Type: Hydro Mount
• Packaging length [cm]: 16
• Packaging width [cm]: 13.6
• Packaging height [cm]: 8.5
• Manufacturer: FEBEST

• Thickness [mm]: 82
• Inner Diameter [mm]: 22
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Rear, Front Axle Right
• Mounting Type: Hydro Mount
• Weight [kg]: 1.399
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Fitting Position: Rear, Front Axle Left, Lower
• paired article number: TED86435
• Weight [kg]: 1.44
• Manufacturer: TEDGUM

• Thickness [mm]: 82
• Inner Diameter [mm]: 22
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Rear, Front Axle Right
• Mounting Type: Hydro Mount
• Weight [kg]: 1.399
• Manufacturer: FEBI BILSTEIN
• Additional information: FE170962
• Lisainfo: FE170962

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear, Lower Front Axle
• Height [mm]: 73
• Inner Diameter [mm]: 22
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Control arm bush left=right

• Inner Diameter [mm]: 22
• Outer Diameter [mm]: 54
• Length [mm]: 72.5
• Mounting Type: Hydro Mount
• paired article number: 271147
• Weight [kg]: 1.39
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: behind the axle, Front Axle Left, Front Axle Right, Lower

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
FORD FOCUS II
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
FORD FOCUS II
(kvaliteediklass: PJ)"

• Thickness [mm]: 82
• Inner Diameter [mm]: 22
• Outer Diameter [mm]: 68
• Material: Rubber/Metal
• Fitting Position: Rear, Front Axle Left, Front Axle Right
• Weight [kg]: 1.849
• Supplementary Article/Info 2: with fastening material
• Manufacturer: BLUE PRINT ZAWIESZENIE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Right, Lower, Rear
• Inner Diameter [mm]: 19
• Height [mm]: 88
• paired article number: 92287AL
• Name: ALT 92288AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle Left, Lower, Rear
• Inner Diameter [mm]: 19
• Outer Diameter [mm]: 21
• Height [mm]: 88
• paired article number: 92288AL
• Name: ALT 92287AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: behind the axle, Front Axle Left, inner, Lower
• Inner Diameter [mm]: 18.6
• Outer Diameter [mm]: 74
• Length [mm]: 87
• Mounting Type: Hydro Mount
• paired article number: 271373
• Weight [kg]: 1.47
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle, both sides, Lower, Rear
• Weight [kg]: 1.2
• Required quantity: 2
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Packaging length [cm]: 20.5
• Packaging width [cm]: 12
• Packaging height [cm]: 12
• Manufacturer: MONROE

• Fitting Position: Front Axle, Lower, Rear
• Inner Diameter [mm]: 22
• Height [mm]: 71
• Name: ALT 88831AL
• Manufacturer: ALTE AUTOMOTIVE

• Production date from: 201410
• Fitting Position: Lower Front Axle, Right
• Weight [kg]: 1.346
• Mounting Type: Hydro Mount
• Packaging length [cm]: 16
• Packaging width [cm]: 13.6
• Packaging height [cm]: 8.5
• Manufacturer: FEBEST

• Weight [kg]: 1.35
• Fitting Position: Front Axle both sides, Lower, Rear
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Length [mm]: 90
• Outer Diameter [mm]: 73
• Inner Diameter [mm]: 21
• Manufacturer: RTS

• Fitting Position: Front Axle, outer
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Manufacturer: CORTECO ZAWIESZENIE

• Thickness [mm]: 82
• Inner Diameter [mm]: 22
• Outer Diameter [mm]: 68
• Material: Rubber/Metal
• Fitting Position: Rear, Front Axle Left, Front Axle Right
• Weight [kg]: 1.849
• Supplementary Article/Info 2: with fastening material
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Required quantity: 2
• Inner Diameter [mm]: 22
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Front Axle, Rear, inner
• Material: Steel
• Inner Diameter 1 [mm]: 22
• Name: DE TD1796W
• Manufacturer: DELPHI

• Fitting Position: Rear Axle Left, Rear Axle Right
• Article number of recommended accessories: 45041 01, 45042 01, 45043 01
• Observe service information:
• Manufacturer: LEMFORDER
• Name: LMI 3988401

SVHC: No information available, please contact the manufacturer!

• Fitting Position: both sides, Front Axle, Rear
• Required quantity: 2
• Weight [kg]: 1.282
• Manufacturer: TEDGUM