• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 253
• Brake Disc Thickness [mm]: 10.5
• Number of Holes: 4
• Surface: Coated
• Manufacturer: JP GROUP
• Lisainfo: Brake Disc
• Additional information: Brake Disc

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Outer Diameter [mm]: 258
• Brake Disc Thickness [mm]: 22
• Number of Holes: 4
• Surface: Coated
• Manufacturer: JP GROUP
• Lisainfo: Brake Disc
• Additional information: Brake Disc

• Quantity per packing unit: 2
• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 253
• Hub Diameter [mm]: 165
• Centering Diameter [mm]: 63.5
• Brake Disc Thickness [mm]: 10.5
• Height [mm]: 33
• Rim Hole Number: 4
• Bolt Hole Circle Ø [mm]: 108
• Replace in pairs only:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Construction Year to: 09.2004
• Minimum thickness [mm]: 8.9
• Brake Disc Type: solid
• Bore Diameter [mm]: 13.7
• Brake Disc Thickness [mm]: 10.2
• Bolt Hole Circle Ø [mm]: 108
• Number of Holes: 4
• Inner Diameter [mm]: 155
• Height [mm]: 33
• Centering Diameter [mm]: 63.5
• Outer Diameter [mm]: 253
• Manufacturer: DENCKERMANN HAMULCE
• Quantity per packing unit: 2

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Height [mm]: 33
• Brake Disc Thickness [mm]: 10
• Outer Diameter [mm]: 252.5
• Number of Holes: 4
• Centering Diameter [mm]: 63.6
• Manufacturer: JPN

• Brake Disc Thickness [mm]: 10
• Rim Hole Number: 4
• Thickness [mm]: 33
• Outer Diameter [mm]: 253
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 8.9
• Centering Diameter [mm]: 63.5
• Weight [kg]: 3.35
• Observe service information:
• Manufacturer: FEBI BILSTEIN
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Braking/Driving Dynamics: for vehicles with ABS
• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Bolt Hole Circle Ø [mm]: 63
• Number of Holes: 4
• Height [mm]: 33
• Centering Diameter [mm]: 63
• Surface: Coated
• Outer Diameter [mm]: 253
• Manufacturer: KAMOKA UK£ADY HAMULCOWE
• Quantity per packing unit: 2

• Brake Disc Thickness [mm]: 10
• Rim Hole Number: 4
• Thickness [mm]: 33
• Outer Diameter [mm]: 253
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 8.9
• Centering Diameter [mm]: 63.5
• Weight [kg]: 3.35
• Observe service information:
• Manufacturer: BLUE PRINT HAMULCE
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Number of Holes: 4
• Test Mark: E1 90R-02C0967/2528
• Surface: Coated
• Outer Diameter [mm]: 253
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8.9
• Centering Diameter [mm]: 63.5
• Height [mm]: 33
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BG3054C

• Braking/Driving Dynamics: for vehicles with ABS
• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Test Mark: ECE-R90
• Height [mm]: 33
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Outer Diameter [mm]: 253
• Number of Holes: 4
• Centering Diameter [mm]: 63.5
• Surface: painted
• Manufacturer: METELLI UKL.HAMULCOWY

• Construction Year from: 05.2001
• Fitting Position: Rear Axle
• Outer Diameter [mm]: 252.7
• Brake Disc Thickness [mm]: 10.2
• Minimum thickness [mm]: 8.9
• Height [mm]: 33
• Bolt Hole Circle Ø [mm]: 107.95
• Brake Disc Type: solid
• Centering Diameter [mm]: 63.6
• Number of Holes: 4
• Surface: Oiled
• fulfils ECE norm: ECE-R90
• Bore Diameter up to [mm]: 13.8
• Manufacturer: BOSCH
• Quantity per packing unit: 2

• Fitting Position: Front Axle
• Construction Year to: 09.2004
• Minimum thickness [mm]: 20
• Brake Disc Type: Vented
• Bore Diameter [mm]: 13.7
• Brake Disc Thickness [mm]: 22
• Bolt Hole Circle Ø [mm]: 108
• Number of Holes: 4
• Inner Diameter [mm]: 136
• Height [mm]: 43.4
• Centering Diameter [mm]: 63.5
• Outer Diameter [mm]: 258
• Manufacturer: DENCKERMANN ZAWIESZENIE
• Quantity per packing unit: 2

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 253
• Brake Disc Thickness [mm]: 10.3
• Minimum thickness [mm]: 8.9
• Height [mm]: 33
• Rim Hole Number: 4
• Brake Disc Type: solid
• Centering Diameter [mm]: 64
• Bolt Hole Circle Ø [mm]: 107.9
• Hub Diameter [mm]: 165
• Weight [kg]: 3.38
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Construction Year to: 09.2004
• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 253
• Brake Disc Thickness [mm]: 10.2
• Minimum thickness [mm]: 8.9
• Brake Disc Type: solid
• Surface: Coated
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 108
• Height [mm]: 33
• Centering Diameter [mm]: 63.5
• Inner Diameter [mm]: 155
• Bore Diameter [mm]: 13.7
• MAPP code available:
• Test Mark: E1 90R-02C0165/0857
• Manufacturer: ATE
• Quality class: Q
• Name: Brake discs

• Brake Disc Thickness [mm]: 22
• Rim Hole Number: 4
• Thickness [mm]: 43.5
• Outer Diameter [mm]: 258
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 20
• Centering Diameter [mm]: 63.6
• Weight [kg]: 5.2
• Observe service information:
• Manufacturer: FEBI HAMULCE
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Height [mm]: 33
• Brake Disc Thickness [mm]: 10
• Thread Size: 13,7
• Minimum thickness [mm]: 8.9
• Outer Diameter [mm]: 253
• Number of Holes: 4
• Centering Diameter [mm]: 63.5
• Bolt Hole Circle Ø [mm]: 108
• Manufacturer: PROFIPOWER

• Construction Year to: 09.2004
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 258
• Minimum thickness [mm]: 20
• Brake Disc Thickness [mm]: 22
• Height [mm]: 43.4
• Centering Diameter [mm]: 64
• Number of Holes: 4
• Manufacturer: LPR
• Name: LPR F1621V

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Outer Diameter [mm]: 253
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8.9
• Centering Diameter [mm]: 63.5
• Height [mm]: 33
• Number of Holes: 4
• Thread Size: 13,7
• Bolt Hole Circle Ø [mm]: 108
• Colour: black
• Surface: painted
• Test Mark: E190R-02C0190/0016
• Manufacturer: TRW
• Quality class: Q
• Name: Brake discs

SVHC: No information available, please contact the manufacturer!

• Brake Disc Thickness [mm]: 22
• Rim Hole Number: 4
• Thickness [mm]: 44
• Outer Diameter [mm]: 258
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 20
• Centering Diameter [mm]: 63.6
• Weight [kg]: 5.2
• Observe service information:
• Manufacturer: BLUE PRINT
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Outer Diameter [mm]: 253
• Brake Disc Thickness [mm]: 10.2
• Height [mm]: 33
• Minimum thickness [mm]: 8.9
• Surface: Coated
• Inner Diameter [mm]: 155
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 63.6
• Hole Arrangement/Number: 04/04
• Wheel Bolt Bore Diameter [mm]: 14
• Packaging length [cm]: 27.8
• Packaging width [cm]: 27.8
• Packaging height [cm]: 8.4
• Weight [kg]: 3.4
• Manufacturer: TEXTAR TARCZE HAMULCOWE

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Number of Holes: 4
• Height [mm]: 33
• Centering Diameter [mm]: 64
• Outer Diameter [mm]: 253
• Surface: Coated
• Minimum thickness [mm]: 8.9
• Tightening Torque [Nm]: 85
• Manufacturer: BREMBO
• Name: BR 08.4931.21
• Quality class: Q

• Brake Disc Thickness [mm]: 22
• Rim Hole Number: 4
• Thickness [mm]: 43.5
• Outer Diameter [mm]: 258
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 20
• Centering Diameter [mm]: 63.6
• Weight [kg]: 5.2
• Name: SW 50 91 2578
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 09.2004
• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 22
• Bolt Hole Circle Ø [mm]: 108
• Number of Holes: 4
• Height [mm]: 43
• Centering Diameter [mm]: 63
• Surface: Coated
• Outer Diameter [mm]: 258
• Manufacturer: KAMOKA
• Quantity per packing unit: 2

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Height [mm]: 43.6
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 22
• Minimum thickness [mm]: 20
• Outer Diameter [mm]: 258
• Number of Holes: 4
• Centering Diameter [mm]: 63.6
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Manufacturer: SKF TARCZE HAM

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: Vented
• Number of Holes: 4
• Test Mark: E1 90R-02C0277/1427
• Surface: Oiled
• Outer Diameter [mm]: 258
• Brake Disc Thickness [mm]: 22
• Minimum thickness [mm]: 20
• Centering Diameter [mm]: 63.5
• Height [mm]: 43.4
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BG3359

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 253
• Brake Disc Thickness [mm]: 10.2
• Height [mm]: 33
• Minimum thickness [mm]: 8.9
• Surface: Coated
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 63.6
• Hole Arrangement/Number: 04/04
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Weight [kg]: 3.4
• Assy./disassy. by qualified personnel required!:
• Name: HE 8DD355105661
• Manufacturer: HELLA PAGID

• Construction Year to: 09.2004
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: internally vented
• Height [mm]: 44
• Brake Disc Thickness [mm]: 22
• Minimum thickness [mm]: 20
• Number of Holes: 4
• Surface: Coated
• Outer Diameter [mm]: 258
• Centering Diameter [mm]: 64
• Installation Information: No degreasing, ready-to-fit solution.
• Manufacturer: LPR

• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Height [mm]: 43.5
• Brake Disc Thickness [mm]: 22
• Outer Diameter [mm]: 258
• Number of Holes: 4
• Centering Diameter [mm]: 63.6
• Manufacturer: JPN

• Construction Year to: 09.2004
• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 253
• Brake Disc Thickness [mm]: 10.2
• Minimum thickness [mm]: 8.9
• Brake Disc Type: solid
• Number of Holes: 4
• Surface: Coated
• Bolt Hole Circle Ø [mm]: 108
• Height [mm]: 33
• Centering Diameter [mm]: 63.5
• Inner Diameter [mm]: 155
• Bore Diameter [mm]: 13.7
• Test Mark: E1 90R-02C0859/1314
• MAPP code available:
• Manufacturer: ATE

General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Test Mark: ECE-R90
• Height [mm]: 43.5
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 22
• Outer Diameter [mm]: 258
• Number of Holes: 4
• Centering Diameter [mm]: 63.5
• Surface: painted
• Manufacturer: METELLI UKL.HAMULCOWY

• Fitting Position: Front Axle
• Bolt Hole Circle Ø [mm]: 63.5
• Height [mm]: 43.7
• Outer Diameter [mm]: 258
• Brake Disc Thickness [mm]: 22
• Minimum thickness [mm]: 20
• Number of bores: 4
• Brake Disc Type: Vented
• Test Mark: ECE R90 APPROVED
• Surface: painted
• Tightening Torque [Nm]: 85
• Manufacturer: ASHIKA-TARCZE
• Quantity per packing unit: 2

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: Vented
• Outer Diameter [mm]: 258
• Brake Disc Thickness [mm]: 22
• Minimum thickness [mm]: 20
• Centering Diameter [mm]: 63.4
• Height [mm]: 43.4
• Number of Holes: 4
• Thread Size: 13,6
• Bolt Hole Circle Ø [mm]: 108
• Colour: black
• Surface: painted
• Test Mark: E190R-02C0176/0529
• Manufacturer: TRW
• Quality class: Q
• Name: Brake discs

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 258
• Brake Disc Thickness [mm]: 22
• Minimum thickness [mm]: 20
• Height [mm]: 43.5
• Rim Hole Number: 4
• Brake Disc Type: Vented
• Centering Diameter [mm]: 64
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Hub Diameter [mm]: 146
• Weight [kg]: 5.15
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Construction Year from: 05.2001
• Fitting Position: Front Axle
• Outer Diameter [mm]: 258
• Brake Disc Thickness [mm]: 22
• Minimum thickness [mm]: 20
• Height [mm]: 43.5
• Bolt Hole Circle Ø [mm]: 108
• Brake Disc Type: Vented
• Centering Diameter [mm]: 63.55
• Number of Holes: 4
• Surface: Coated
• Machining: Alloyed/High-carbon
• fulfils ECE norm: ECE-R90
• Bore Diameter up to [mm]: 13.6
• Manufacturer: BOSCH
• Name: BS 0986478892
• Quantity per packing unit: 2

• Fitting Position: Front Axle
• Bolt Hole Circle Ø [mm]: 63.5
• Height [mm]: 43.7
• Outer Diameter [mm]: 258
• Brake Disc Thickness [mm]: 22
• Minimum thickness [mm]: 20
• Number of bores: 4
• Brake Disc Type: Vented
• Test Mark: ECE R90 APPROVED
• Surface: painted
• Tightening Torque [Nm]: 85
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Surface: Coated
• Outer Diameter [mm]: 253
• Brake Disc Thickness [mm]: 10
• Height [mm]: 33
• Rim Hole Number: 4
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 64
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 8.9
• Weight [kg]: 3.4
• Hole Arrangement/Number: 4/4
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 258
• Brake Disc Thickness [mm]: 22
• Height [mm]: 43.6
• Minimum thickness [mm]: 20
• Surface: Coated
• Inner Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 63.6
• Hole Arrangement/Number: 04/04
• Wheel Bolt Bore Diameter [mm]: 13.8
• Packaging length [cm]: 27.8
• Packaging width [cm]: 27.8
• Packaging height [cm]: 10.5
• Weight [kg]: 5.3
• Manufacturer: TEXTAR TARCZE HAMULCOWE
• Quality class: PJ
• Name: Brake discs

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Height [mm]: 43.4
• Brake Disc Thickness [mm]: 22
• Thread Size: 13,6
• Minimum thickness [mm]: 20
• Outer Diameter [mm]: 258
• Number of Holes: 4
• Centering Diameter [mm]: 63.4
• Bolt Hole Circle Ø [mm]: 108
• Manufacturer: PROFIPOWER

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 22
• Number of Holes: 4
• Height [mm]: 44
• Centering Diameter [mm]: 64
• Outer Diameter [mm]: 258
• Surface: Coated
• Minimum thickness [mm]: 20
• Tightening Torque [Nm]: 85
• Manufacturer: BREMBO
• Name: BR 09.7806.11
• Quality class: Q

• Construction Year to: 09.2004
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 258
• Brake Disc Thickness [mm]: 22
• Minimum thickness [mm]: 20
• Brake Disc Type: Vented
• Number of Holes: 4
• Surface: Coated
• MAPP code available:
• Bolt Hole Circle Ø [mm]: 108
• Height [mm]: 43.4
• Centering Diameter [mm]: 63.5
• Inner Diameter [mm]: 136
• Bore Diameter [mm]: 13.7
• Test Mark: E1 90R-02C0115/0190
• Manufacturer: ATE
• Quality class: Q
• Name: Brake discs

• Fitting Position: Rear Axle
• Braking/Driving Dynamics: for vehicles with ABS
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Outer Diameter [mm]: 253
• Brake Disc Thickness [mm]: 10
• Supplementary Article/Info 2: without bolts/screws
• Height [mm]: 33
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 63.5
• Number of Holes: 4
• Quantity Unit: Set
• Surface: Coated
• Test Mark: R90 Homologated
• Version: JC
• Weight [kg]: 7
• Minimum thickness [mm]: 8.9
• Tightening Torque [Nm]: 85
• Packing Type: Carton
• Packaging length [cm]: 27.5
• Packaging width [cm]: 27.5
• Packaging height [cm]: 8
• Manufacturer: JURID

• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 258
• Brake Disc Thickness [mm]: 22
• Height [mm]: 43.6
• Minimum thickness [mm]: 20
• Surface: Coated
• Inner Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 63.6
• Hole Arrangement/Number: 04/04
• Wheel Bolt Bore Diameter [mm]: 13.8
• Weight [kg]: 5.3
• Assy./disassy. by qualified personnel required!:
• Name: HE 8DD355106431
• Manufacturer: HELLA PAGID

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid, slotted
• Brake Disc Thickness [mm]: 10
• Number of Holes: 4
• Height [mm]: 33
• Centering Diameter [mm]: 64
• Outer Diameter [mm]: 253
• Surface: Coated
• Minimum thickness [mm]: 8.9
• Tightening Torque [Nm]: 85
• Manufacturer: BREMBO

Brief Information: For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: internally vented
• Surface: Coated
• Outer Diameter [mm]: 258
• Brake Disc Thickness [mm]: 22
• Height [mm]: 44
• Rim Hole Number: 4
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 64
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 20
• Weight [kg]: 5.14
• Hole Arrangement/Number: 4/4
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: Vented
• Outer Diameter [mm]: 258
• Brake Disc Thickness [mm]: 22
• Supplementary Article/Info 2: without bolts/screws
• Height [mm]: 43.5
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 63.5
• Number of Holes: 4
• Material: Aluminium
• Quantity Unit: Set
• Surface: Coated
• Test Mark: R90 Homologated
• Version: JC
• Weight [kg]: 11.22
• Minimum thickness [mm]: 20
• Tightening Torque [Nm]: 85
• Packing Type: Carton
• Packaging length [cm]: 27.5
• Packaging width [cm]: 27.5
• Packaging height [cm]: 14
• Manufacturer: JURID

• Construction Year to: 09.2004
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 258
• Brake Disc Thickness [mm]: 22
• Minimum thickness [mm]: 20
• Brake Disc Type: Vented
• Number of Holes: 4
• Surface: Coated
• Bolt Hole Circle Ø [mm]: 108
• Height [mm]: 43.4
• Centering Diameter [mm]: 63.5
• Inner Diameter [mm]: 136
• Bore Diameter [mm]: 13.7
• MAPP code available:
• Manufacturer: ATE
• Quality class: Q
• Name: Brake discs

General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid, Perforated
• Brake Disc Thickness [mm]: 10
• Number of Holes: 4
• Height [mm]: 33
• Centering Diameter [mm]: 64
• Outer Diameter [mm]: 253
• Surface: Coated
• Minimum thickness [mm]: 9.1
• Tightening Torque [Nm]: 85
• Manufacturer: BREMBO
• Name: BR 08.4931.2X

General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: internally vented, slotted
• Brake Disc Thickness [mm]: 22
• Number of Holes: 4
• Height [mm]: 44
• Centering Diameter [mm]: 64
• Outer Diameter [mm]: 258
• Surface: Coated
• Minimum thickness [mm]: 20
• Tightening Torque [Nm]: 85
• Manufacturer: BREMBO
• Name: BR 09.7806.75
• Quality class: Q

Brief Information: For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: perforated/vented
• Brake Disc Thickness [mm]: 22
• Number of Holes: 4
• Height [mm]: 44
• Centering Diameter [mm]: 64
• Outer Diameter [mm]: 258
• Surface: Coated
• Minimum thickness [mm]: 20.5
• Tightening Torque [Nm]: 85
• Manufacturer: BREMBO
• Name: BR 09.7806.1X

General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid, Perforated
• Surface: Coated
• Outer Diameter [mm]: 253
• Brake Disc Thickness [mm]: 10
• Height [mm]: 33
• Rim Hole Number: 4
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 64
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 8.9
• Weight [kg]: 3.4
• Hole Arrangement/Number: 4/4
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: internally vented, Perforated
• Surface: Coated
• Outer Diameter [mm]: 258
• Brake Disc Thickness [mm]: 22
• Height [mm]: 44
• Rim Hole Number: 4
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 64
• Test Mark: KBA 60872
• Minimum thickness [mm]: 20
• Weight [kg]: 5.14
• Hole Arrangement/Number: 4/4
• Manufacturer: ZIMMERMANN