Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Engine Code: GSG
- Required quantity: 4
- Quantity per packing unit: 4
-
Spark Plug: 1 -
Earthed Electrode, Nickel Middle Electrode - Thread Size: M14x1.25
- Thread Length [mm]: 17.5
- Diameter [mm]: 14
- Connector type: Solid SAE
- Spanner Size: 16 mm
- Tightening Torque [Nm]: 22
- Weight [g]: 40
- Gross Weight [g]: 43
- alternative item: IT20TT
- Manufacturer: DENSO
- Name: DN T20TT
- Quality class: Q
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
- Construction Year to: 07.1988
- Electrode Gap [mm]: 0.8
-
Spark Plug: 1 -
Earthed Electrode - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 01.1986
- Construction Year to: 07.1988
- Electrode Gap [mm]: 0.8
-
Thread Size: M14 x 1,
25 - Spanner Size: 16
- Thread Length [mm]: 17.5
- Tightening Torque [Nm]: 30
-
Spark Plug: 1 -
Earthed Electrode - Assy./disassy. by qualified personnel required!:
- Name: HE 8EH188704261
- Manufacturer: HELLA
- Construction Year from: 01.1986
- Engine Code: GSG VAL VV
- Tightening Torque [Nm]: 20
- Electrode Gap [mm]: 0.8
- Thread Size: M14 x 1.25
- Spanner Size: 16
-
Spark Plug: 1 -
Earthed Electrode - Thread Length [mm]: 17.5
- Assy./disassy. by qualified personnel required!:
- Name: HE 8EH188704251
- Manufacturer: HELLA
- Engine Code: GSG
- Required quantity: 4
- Quantity per packing unit: 4
-
Spark Plug: 1 -
Earthed Electrode, Nickel Middle Electrode - Thread Size: M14x1.25
- Thread Length [mm]: 17.5
- Diameter [mm]: 14
- for OE number: 1216460
- Connector type: Removable SAE
- Spanner Size: 16 mm
- Tightening Torque [Nm]: 22
- Weight [g]: 40
- Gross Weight [g]: 43
- alternative item: T20TT
- Manufacturer: DENSO
- Construction Year to: 07.1988
- Required quantity: 4
- Electrode Gap [mm]: 0.8
- Tightening Torque [Nm]: 15
-
Thread Size: M 14 x 1,
25 - Thread Length [mm]: 17.5
- Spanner Size: 16
- Spark Position [mm]: 3
- Number of pins: 1
- Manufacturer: BOSCH
- Name: BS 0242235661
- Construction Year from: 01.1986
- Engine Code: GSG VAL VV
- Quantity per packing unit: 4
- Spanner Size: 16 mm
-
Thread Size: M14 x 1,
25 - Thread Length [mm]: 17.5
- Spark Position [mm]: 3
- Manufacturer: NGK
-
Name: NG V-
LINE 7 -
Additional information: V-
LINE 7 -
Lisainfo: V-
LINE 7
Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with taper gasket seat
- Required quantity: 4
- electrode gap to be set [mm]: 0.7
- Quantity per packing unit: 10
- Electrode Gap [mm]: 0.9
-
Connector type: M4/
SAE - Thread Size: M14x1.25
- Spanner Size: 16 mm
- Quality/ Grade: Nickel GE
- Packing Type: Carton
- Thread Length [mm]: 17.5
- Technical Information Number: RS9YC
- Spark Position [mm]: 3
- Tightening torque from [Nm]: 15
- Tightening torque to [Nm]: 20
- Packaging length [cm]: 8.85
- Packaging width [cm]: 2.6
- Packaging height [cm]: 2.35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 9
- Projection [mm]: 1.5
-
Name: CH OE011/
T10 - Manufacturer: CHAMPION
Spark Plug: 1 - Earthed Electrode, with taper seat, Copper Centre Electrode
- Construction Year from: 01.1986
- Engine Code: GSG VAL VV
- Spanner Size: 16 mm
-
Thread Size: M14 x 1,
25 - Thread Length [mm]: 17.5
- Spark Position [mm]: 3
- Manufacturer: NGK
Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with taper gasket seat
- Required quantity: 4
- Alternatively:
- Quantity per packing unit: 10
- Electrode Gap [mm]: 0.9
- Connector type: SAE
- Thread Size: M14x1.25
- Spanner Size: 16 mm
-
Quality/ Grade: Ti Poly-
V - Packing Type: Carton
-
Spark Plug: 1 -
Earthed Electrode, with taper seat - Thread Length [mm]: 17.5
- Technical Information Number: CET9
- Spark Position [mm]: 3
- Tightening torque from [Nm]: 15
- Tightening torque to [Nm]: 20
- Packaging length [cm]: 8.85
- Packaging width [cm]: 2.6
- Packaging height [cm]: 2.35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1.5
- Manufacturer: CHAMPION
- Engine Code: GSG
- Required quantity: 4
-
Fuel Type: CNG/
LPG - Quantity per packing unit: 4
- Thread Size: M14x1.25
- Thread Length [mm]: 17.5
- Diameter [mm]: 14
- Connector type: Solid SAE
- Spanner Size: 16 mm
- Tightening Torque [Nm]: 22
- Weight [g]: 40
- Gross Weight [g]: 43
- alternative item: IT20TT
- Manufacturer: DENSO
- Name: DN IT20TT
- Quality class: Q
Spark Plug: with resistor, 1 - Earthed Electrode, Iridium Middle Electrode
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
- Required quantity: 4
- Alternatively:
- Quantity per packing unit: 4
- Electrode Gap [mm]: 1.3
- Connector type: SAE
- Thread Size: M14x1.25
- Spanner Size: 16 mm
- Quality/ Grade: Pt GE
- Packing Type: Carton
- Thread Length [mm]: 17.5
- Technical Information Number: RS8WYPB5
- Spark Position [mm]: 3
- Tightening torque from [Nm]: 15
- Tightening torque to [Nm]: 20
- Packaging length [cm]: 9.5
- Packaging width [cm]: 2.1
- Packaging height [cm]: 2.1
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1.5
- Name: CH CCH9808
- Manufacturer: CHAMPION
Spark Plug: 1 - Earthed Electrode, with taper seat, Iridium Middle Electrode
- Construction Year from: 01.1986
- Engine Code: GSG VAL VV
- Spanner Size: 16 mm
-
Thread Size: M14 x 1,
25 - Thread Length [mm]: 17.5
-
Spark Plug: Iridium Middle Electrode,
Fixed SAE connector -
Fuel Type: CNG/
LPG -
Recommended change interval [km]: 60,
000 - Manufacturer: NGK
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks