• Fitting Position: Front Axle
• Net weight [kg]: 0.04
• Lisainfo: 54
• Additional information: 54

• Fitting Position: Rear Axle
• Net weight [kg]: 0.04
• Lisainfo: 42.79
• Additional information: 42.79

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Manufacturer Restriction: ATE / TEVES
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Diameter [mm]: 43
• Brake System: Lucas
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-533

• Fitting Position: Front Axle
• Brake System: ATE
• for brake disc thickness [mm]: 24
• Brake Caliper Type: Brake Caliper (1 piston)
• Diameter [mm]: 54
• Quantity per axle: 2
• Manufacturer: QUICK BRAKE
• Name: QB 114-0003

• Fitting Position: Front Axle
• Diameter [mm]: 54
• Brake System: ATE
• for OE number: 0K2403324Z
• Version: MAIN PARTS
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-359

• Fitting Position: Rear Axle
• Brake System: TRW
• for brake disc thickness [mm]: 10.5, 10
• Brake Caliper Type: Brake Caliper (1 piston)
• Läbimõõt [mm]: 43
• Hulk telje kohta: 2
• Manufacturer: QUICK BRAKE
• Name: QB 114-0298

• Fitting Position: Front Axle
• Diameter [mm]: 54
• Brake System: ATE
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-025

• Fitting Position: Rear Axle
• Diameter [mm]: 43
• Brake System: LUCAS
• for OE number: 6141146
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-098

• Fitting Position: Front Axle
• Brake System: ATE
• Piston Diameter [mm]: 54
• Manufacturer: BREMBO

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Manufacturer Restriction: ATE
• for piston diameter [mm]: 54
• Supplementary Article/Supplementary Info: with protective cap
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Brake Caliper Type: Brake Caliper (4 pistons)
• Fitting Position: Front Axle
• Diameter [mm]: 40
• Brake System: ATE
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-093

• Fitting Position: Front Axle
• Diameter [mm]: 54
• Brake System: ATE
• Manufacturer: PROFIPOWER

• Fitting Position: Front Axle
• Brake System: ATE
• for brake disc thickness [mm]: 24
• Brake Caliper Type: Brake Caliper (1 piston)
• Diameter [mm]: 54
• Quantity per axle: 2
• Supplementary Article/Supplementary Info: with piston
• Manufacturer: QUICK BRAKE
• Name: QB 114-5115

• Fitting Position: Rear Axle
• Brake System: TRW
• for brake disc thickness [mm]: 10.5, 10
• Brake Caliper Type: Brake Caliper (1 piston)
• Diameter [mm]: 43
• Quantity per axle: 2
• Supplementary Article/Supplementary Info: with piston
• Name: QB 114-5380
• Manufacturer: QUICK BRAKE

• Fitting Position: Rear Axle
• Diameter [mm]: 43
• Full Set:
• Brake System: LUCAS
• for OE number: 1125861
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-1198C

• Fitting Position: Front Axle
• Diameter [mm]: 54
• Brake System: Ate
• Full Set:
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-850C

• Fitting Position: Front Axle
• Diameter [mm]: 54
• Brake System: ATE
• Full Set:
• for OE number: 46468090
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-1079C

• Fitting Position: Front Axle
• Diameter [mm]: 54
• Brake System: MANDO/ATE
• Full Set:
• not for brake disc thickness [mm]: 22
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-849C
• Additional information: D4849C AUTOFREN
• Lisainfo: D4849C AUTOFREN

• Fitting Position: Front Axle
• Diameter [mm]: 54
• Brake System: ATE
• Full Set:
• Version: PISTON KIT+GUIDEPINS
• Name: SE D4-3282S
• Manufacturer: AUTOFREN SEINSA

• Fitting Position: Front Axle
• Diameter [mm]: 54
• Brake System: ATE
• Full Set:
• Version: PISTON KIT+GUIDEPINS
• Name: SE D4-3496S
• Manufacturer: AUTOFREN SEINSA

• Fitting Position: Front Axle Left
• Brake Caliper Type: Brake Caliper (1 piston)
• Supplementary Article/Info 2: without clip
• for brake disc thickness [mm]: 24
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• paired article number: 78SKV092
• Piston Diameter [mm]: 54
• Weight [kg]: 2.66
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Front Axle Right
• Brake Caliper Type: Brake Caliper (1 piston)
• Supplementary Article/Info 2: without clip
• for brake disc thickness [mm]: 24
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• paired article number: 78SKV091
• Piston Diameter [mm]: 54
• Weight [kg]: 2.67
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Rear Axle Left
• Brake System: GIRLING
• Brake Caliper Type: Brake Caliper (1 piston)
• Piston Diameter [mm]: 43
• paired article number: 131-05-014
• for brake disc thickness [mm]: 11
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle Right
• Brake System: GIRLING
• Brake Caliper Type: Brake Caliper (1 piston)
• Piston Diameter [mm]: 43
• paired article number: 131-05-013
• for brake disc thickness [mm]: 11
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle Left
• Brake Caliper Type: Brake Caliper (1 piston)
• Brake System: GIRLING
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• paired article number: 46SKV324
• Weight [kg]: 2.21
• Brake Disc Thickness [mm]: 11
• Brake Caliper Piston Diameter [mm]: 43
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 46SKV323

• Fitting Position: Rear Axle Right
• Brake Caliper Type: Brake Caliper (1 piston)
• Brake System: GIRLING
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• paired article number: 46SKV323
• Weight [kg]: 2.26
• Brake Disc Thickness [mm]: 11
• Brake Caliper Piston Diameter [mm]: 43
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 46SKV324

• Fitting Position: Rear Axle Left
• Brake System: GIRLING
• Brake Caliper Type: Brake Caliper (1 piston)
• Piston Diameter [mm]: 43
• paired article number: 131-04-826
• for brake disc thickness [mm]: 10
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle Right
• Brake System: GIRLING
• Brake Caliper Type: Brake Caliper (1 piston)
• Piston Diameter [mm]: 43
• paired article number: 131-04-825
• for brake disc thickness [mm]: 10
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle Right
• Brake Caliper Type: Brake Caliper (1 piston)
• Brake System: GIRLING
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• paired article number: 34SKV887
• Weight [kg]: 2.3
• Brake Disc Thickness [mm]: 10
• Brake Caliper Piston Diameter [mm]: 43
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 34SKV888

• Fitting Position: Rear Axle Left
• Brake Caliper Type: Brake Caliper (1 piston)
• Brake System: GIRLING
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• paired article number: 34SKV888
• Weight [kg]: 2.3
• Brake Disc Thickness [mm]: 10
• Brake Caliper Piston Diameter [mm]: 43
• Always compare old and new part (in particular OE No.):
• Name: CE 34SKV887
• Manufacturer: ESEN SKV

• for piston diameter [mm]: 54
• Brake Caliper Type: Fist-type Caliper
• paired article number: 6260941
• Version: IAM
• New Part:
• Used part return not required:
• Manufacturer: METZGER

Fitting Position: Front Axle Right, in front of axle, Front Axle Left, behind the axle

• for piston diameter [mm]: 54
• Brake Caliper Type: Fist-type Caliper
• paired article number: 6260942
• Version: IAM
• New Part:
• Used part return not required:
• Manufacturer: METZGER

Fitting Position: Front Axle Left, in front of axle, Front Axle Right, behind the axle

• Fitting Position: in front of axle, Front Axle Left
• paired article number: 34725
• Brake System: ATE
• Brake Disc Thickness [mm]: 24
• Brake Caliper Type: Brake Caliper (1 piston)
• Diameter [mm]: 54
• Manufacturer: BUDWEG CALIPER

• Fitting Position: in front of axle, Front Axle Right
• paired article number: 34724
• Brake System: ATE
• Brake Disc Thickness [mm]: 24
• Brake Caliper Type: Brake Caliper (1 piston)
• Diameter [mm]: 54
• Manufacturer: BUDWEG CALIPER