Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Colour: red
- Capacity [litre]: 1
- Weight [kg]: 0.93
- Observe service information:
- Manufacturer: FEBI BILSTEIN
- Name: FE 08971
Specification: Suffix A, MAN 339 Z1, MB 236.6, MB 236.2, Ford WSS-M2C186-A, MB 236.7, MB 236.1, MB 236.5, Ford WSS-M2C166-H, MAN 339 V1, Allison C3/C4, Dexron II D, Ford WSS-M2C185-A, Ford WSS-M2C138-CJ General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Width [mm]: 115
- Height [mm]: 225
- Transmission Type: for automatic transmission
- Colour: red
- Chemical Properties: Contains mineral oil
- Capacity [litre]: 1
- Observe the vehicle manufacturer specifications:
- Observe system fill quantity:
- Length [mm]: 60
- Packing Type: Canister
-
Article number of the recommended special tool: V99-
1017 - Weight [kg]: 1.19
- Manufacturer: VAICO
Oil manufacturer recommendation: CAT TO-2, ZF TE-ML 03D, ZF TE-ML 14A, Allison C-4, ZF TE-ML 11A, ZF TE-ML 17C, MAN 339 Typ Z-1/V-1, GM Dexron II D, ZF TE-ML 04D, Mercedes Benz 236,1, Voith 55,6335,32, Ford Mercon General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity per packing unit: 4
- Colour: red
- Capacity [litre]: 5
- Weight [kg]: 4.88
- Observe service information:
- Manufacturer: FEBI BILSTEIN
Specification: Suffix A, MAN 339 Z1, MB 236.6, MB 236.2, Ford WSS-M2C186-A, MB 236.7, MB 236.1, MB 236.5, Ford WSS-M2C166-H, MAN 339 V1, Allison C3/C4, Dexron II D, Ford WSS-M2C185-A, Ford WSS-M2C138-CJ General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission Type: for automatic transmission
- Colour: red
- Chemical Properties: Contains mineral oil
- Capacity [litre]: 5
- Observe system fill quantity:
- Observe the vehicle manufacturer specifications:
- Height [mm]: 230
-
Article number of the recommended special tool: V99-
1017 - Length [mm]: 300
- Width [mm]: 115
- Weight [kg]: 4.567
- Quantity Unit: Box
- Packing Type: Canister
- Manufacturer: VAICO
Oil manufacturer recommendation: Voith 55,6335,32, Allison C-4, ZF TE-ML 04D, ZF TE-ML 14A, MAN 339 Typ Z-1/V-1, CAT TO-2, ZF TE-ML 11A, GM Dexron II (D), Mercedes Benz 236,1, FORD MERCON, ZF TE-ML 17C, ZF TE-ML 03D, ATF II General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission Number: N
(4x4) 5/ 1 - Fill quantity [l]: 1.25
-
Oil manufacturer recommendation: ZF TE-
ML 02L -
SAE viscosity class: 75W-
80
Specification: 000 km or 3 years), API GL-4, DTFR 13B150 (MB 235., Eaton Europe (300, IVECO, MAN 341 Typ E3, MAN 341 Type E3, MAN 341 Type Z4, MB 235.4, Renault (Note Techni, Volvo 97305, Volvo 97307, ZF TE-ML 01L, ZF TE-ML 02L, ZF TE-ML 08, ZF TE-ML 13, ZF TE-ML 16K
-
Transmission Number: N
(4x4) 5/ 1 - Fill quantity [l]: 1.25
-
Specification: API GL-
4 -
SAE viscosity class: 80W-
90 -
Oil manufacturer recommendation: MIL-
L- 2105
-
Transmission Number: N
(4x4) 5/ 1 - Fill quantity [l]: 1.25
-
Oil manufacturer recommendation: ZF TE-
ML 05C/ 12C/ 16E
Specification: API GL-5, Liebherr, New Holland-520B, ZF TE-ML 05C/12C/16E
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks