• Colour Coding: black
• Thread Size: "1/8"" x 27 NPTF"
• Spanner Size: 13
• Number of pins: 1
• for OE number: 6145143
• Manufacturer: DELLO AUTOMEGA

• Spanner Size: 12
• Colour Coding: green
• Thread Size: 1/8" - 27 NPTF
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Spanner Size: 12
• Colour Coding: black
• Thread Size: M10 x 1
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

Manufacturer: MAGNETI MARELLI

• External Thread Size: 1/8" - 27 NPTF
• Spanner Size: 12
• Colour Coding: green
• Weight [kg]: 0.04
• Name: SW 50 23 0002
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• External Thread Size: 1/8" - 27 NPTF
• Spanner Size: 12
• Colour Coding: green
• Weight [kg]: 0.04
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Colour: green
• Thread Size: 1/8x27 NPTF
• Manufacturer: FAE

• for OE number: 1L2412A648BA
• Manufacturer: NRF

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Number of pins: 2
• Spanner Size: 25
• Thread Size: 3/8 NPT
• for OE number: 1626262
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Thread Size: 3/8x18 NPTF
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: VER

• Connector Shape: round
• Thread Size: 3/8x18 NPTF
• Manufacturer: VERNET

• Fabrication Number: ECT-FR-001
• Manufacturer: NTY
• Name: NTY ECT-FR-001

• Engine Code: N5F
• Number of pins: 2
• Manufacturer: ERA

• Connector Shape: rectangular
• Material: Brass
• Number of pins: 2
• Plug Type: Male
• Sensor Type: NTC Sensor
• Spanner Size: 25 mm
• Thread Size: 3/8"x18NPTF

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Resistor [Ohm]: 450
• Component Number: 120-05-037
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Sensor Type: Passive sensor
• Manufacturer: KAMOKA

• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 34
• Housing Colour: black
• Weight [kg]: 0.045
• Resistor [Ohm]: 450
• Operating Mode: Electric
• Alternative Repair Kit: 550038
• Manufacturer: ERA

• Height [mm]: 34
• Weight [kg]: 0.04
• Number of connectors: 2
• Required quantity: 1
• Supplementary Article/Info 2: for camshaft, without cable
• Resistor [Ohm]: 450
• Colour: black
• Operating Mode: Electric
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Rated Voltage [V]: 12
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-FR-051
• Manufacturer: NTY

• Production date from: 01.08.1994
• Production date to: 31.07.2000
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MEY

• Engine Code: N5F
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Length [mm]: 54
• Number of connectors: 2
• Weight [kg]: 0.03
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Manufacturer: FAST

• Connector Shape: rectangular
• Number of pins: 2
• Number of mounting bores: 1
• for OE number: 7009578
• Manufacturer: DELLO AUTOMEGA

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.04
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 17SKV111
• Manufacturer: ESEN SKV

• Housing Colour: grey
• Thread Size: 3/8x18 NPTF
• Number of pins: 2
• Manufacturer: FAE

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Sensor Type: Inductive Sensor
• Resistor [Ohm]: 500
• for OE number: 5L2E 6B288 AA
• Manufacturer: MEAT&DORIA

• Construction Year to: 12.1995
• Fitting Position: Front Axle
• Resistor [Ohm]: 1,100
• for OE number: 96AB2B372BB
• Number of pins: 2
• Number of mounting bores: 1
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS042

• Construction Year from: 08.1995
• Construction Year to: 12.1995
• Engine Code: N5E
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 700
• Weight [kg]: 0.08
• Name: ANDUR, VŽNTVOLL
• Manufacturer: VAL

• Length [mm]: 64
• Number of connectors: 2
• Weight [kg]: 0.022
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR, VŽNTVOLL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 64
• Number of connectors: 2
• Weight [kg]: 0.022
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Housing Colour: black
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Manufacturer: FAE

• Colour: black
• Number of pins: 2
• Weight [kg]: 0.02
• Resistor [Ohm]: 400
• Fitting Depth [mm]: 37.5
• Manufacturer: ERA

• Number of pins: 2
• Manufacturer: FAE

• Manufacturer Restriction: VAG
• Number of pins: 3
• Cable Length [mm]: 200
• Socket Width [mm]: 1.5
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Contact surface: Gold-plated
• Cable Cross Section [mm²]: 0.75
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, rattap””rete andur
• Manufacturer: HBE

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Fitting Position: Front Axle
• Construction Year to: 08.1995
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 705
• Name: DE SS20140
• Manufacturer: DELPHI

• Fitting Position: Front Axle
• Construction Year from: 09.1995
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 745
• Manufacturer: DELPHI
• Name: DE SS20016

• Fitting Position: Rear
• Number of pins: 4
• Voltage [V]: 12
• Weight [kg]: 0.42
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 06SKV141

• Fitting Position: Rear Axle
• Resistor [Ohm]: 1,100
• for OE number: 96FB2B372CD
• Number of pins: 4
• Number of mounting bores: 2
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Rear Axle Left, Rear Axle Right
• Sensor Type: Passive sensor
• Length [mm]: 1,140
• Length 1/ Length 2 [mm]: 785/800
• Socket colour: black

• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: MAG

• Fitting Position: Front Axle
• Construction Year to: 08.1995
• Length [mm]: 770
• Braking/Drive Dynamics: for vehicles with ABS
• Cable Length [mm]: 722
• Rated Voltage [V]: 12
• Weight [kg]: 0.1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 07.1996
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Connector Shape: triangular
• Cable Length [mm]: 550
• Sensor Type: Inductive Sensor
• Resistor [kOhm]: 15.4
• for OE number: 94BB 9E731 DA
• Manufacturer: MEAT&DORIA

• Construction Year to: 12.1995
• Fitting Position: Front Axle
• Required quantity: 2
• Length [mm]: 722
• MAPP code available:
• Manufacturer: ATE