Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Rims: for steel rims
- Thickness [mm]: 15
-
Internal Thread Size: M12 x 1,
5 - Quality/ Grade: 10
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Wheel Fastening: Conical Seat F
- Material: Steel
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.02
- Observe service information:
- Manufacturer: FEBI BILSTEIN
- Additional information: FE27413
- Lisainfo: FE27413
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 25
-
Fitting Position: Rear Axle,
Front Axle - for OE number: 1 470 843
-
Internal Thread [mm]: M12 x 1,
5 - Spanner Size: 19
- Thickness [mm]: 15
- Quality/ Grade: 10
- Weight [kg]: 0.021
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Wheel Fastening: Conical Seat F
-
Fitting Position: Front Axle,
Rear Axle - Spanner Size: 19
- Quality/ Grade: 10
- Manufacturer: FAST
- Length [mm]: 46
- Material: Steel
- Surface: Zink flake coated
- Thread Length [mm]: 26
- Bolt Head Diameter [mm]: 19
- Shaft Length [mm]: 13
- Screw length below head [mm]: 42
- Knurl Diameter [mm]: 13
- Manufacturer: FAST
- Length [mm]: 46
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 26
- Quality/ Grade: 10.9
- Shaft Length [mm]: 13
- Material: Steel
- Surface: Zink flake coated
- Screw length below head [mm]: 42
- Bolt/Nut Version: Knurled Bolt
- Knurl Diameter [mm]: 13
- Bolt Head Diameter [mm]: 19
- Weight [kg]: 0.04
- Manufacturer: FEBI BILSTEIN
- Additional information: FE32307
- Lisainfo: FE32307
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 46
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 26
- Quality/ Grade: 10.9
- Shaft Length [mm]: 13
- Material: Steel
- Surface: Zink flake coated
- Screw length below head [mm]: 42
- Bolt/Nut Version: Knurled Bolt
- Knurl Diameter [mm]: 13
- Bolt Head Diameter [mm]: 19
- Weight [kg]: 0.04
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Rims: for light alloy rims,
for steel rims - Thickness [mm]: 31
- Outer Diameter [mm]: 28
-
Internal Thread Size: M12 x 1,
5 - Quality/ Grade: 10
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Wheel Fastening: Conical Seat F
- Material: Steel
- Surface: Chromed
- Supplementary Article/Info 2: with lid
-
Fitting Position: Rear Axle,
Front Axle - Weight [kg]: 0.06
- Observe service information:
- Manufacturer: FEBI BILSTEIN
- Additional information: F29463
- Lisainfo: F29463
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Rims: for light alloy rims
- Thickness [mm]: 27.5
- Outer Diameter [mm]: 28
-
Internal Thread Size: M12 x 1,
5 - Quality/ Grade: 8
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Wheel Fastening: Conical Seat F
- Material: Steel
-
Surface: Zinc-
coated -
Fitting Position: Rear Axle,
Front Axle - Weight [kg]: 0.058
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Rims: for light alloy rims,
for steel rims - Thickness [mm]: 31
- Outer Diameter [mm]: 28
-
Internal Thread Size: M12 x 1,
5 - Quality/ Grade: 10
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Wheel Fastening: Conical Seat F
- Material: Steel
- Surface: Chromed
- Supplementary Article/Info 2: with lid
-
Fitting Position: Rear Axle,
Front Axle - Weight [kg]: 0.06
- Observe service information:
- Manufacturer: FEBI BILSTEIN
- Lisainfo: 46674 FEBI
- Additional information: 46674 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Rims: for light alloy rims
- Thickness [mm]: 27.5
- Outer Diameter [mm]: 28
-
Internal Thread Size: M12 x 1,
5 - Quality/ Grade: 8
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Wheel Fastening: Conical Seat F
- Material: Steel
-
Surface: Zinc-
coated -
Fitting Position: Rear Axle,
Front Axle - Weight [kg]: 0.058
- Observe service information:
- Name: SW 50 90 7176
- Manufacturer: SWAG
- Lisainfo: 50 90 7176 SWA
- Additional information: 50 90 7176 SWA
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Rims: for light alloy rims
- Thickness [mm]: 27.5
- Outer Diameter [mm]: 28
-
Internal Thread Size: M12 x 1,
5 - Quality/ Grade: 8
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Wheel Fastening: Conical Seat F
- Material: Steel
-
Surface: Zinc-
coated -
Fitting Position: Rear Axle,
Front Axle - Weight [kg]: 0.058
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Height [mm]: 31
-
Thread Size: M12 x 1,
5 - Manufacturer: 3RG
- Quantity per packing unit: 20
-
Internal Thread [mm]: M12 x 1,
5 - Wheel Fastening: Conical Seat F
-
Fitting Position: Rear Axle,
Front Axle - Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Weight [kg]: 0.06
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity per packing unit: 25
-
Internal Thread [mm]: M12 x 1,
5 -
Fitting Position: Rear Axle,
Front Axle - Spanner Size: 19
- Thickness [mm]: 31
- Bolt Head-/Nut Design: Male Hex
- Quality/ Grade: 8
- Weight [kg]: 0.057
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity per packing unit: 10
- for OE number: 1 678 260
-
Fitting Position: Rear Axle,
Front Axle - Material: Steel
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Quality/ Grade: 10
- Surface: Chromed
- Wheel Fastening: Conical Seat F
- Supplementary Article/Info 2: with lid
- Observe service information:
-
Fabrication Number: KSP-
FR- 000 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks