• Construction Year to: 03.2000
• Oxygen Sensor: Regulating Sensor
• Length [mm]: 375
• Number of connectors: 4

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Fabrication Number: ESL-FR-003
• Manufacturer: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Thread pre-greased

• Colour: black
• Fitting Position: Front, before catalytic converter
• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fabrication Number: ESL-FR-000
• Manufacturer: NTY

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Oxygen Sensor: Switching-type Oxygen Sensor
• Length [mm]: 373
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.13
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV135

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Length [mm]: 373
• Number of pins: 4
• Oxygen Sensor: Thread pre-greased
• Fabrication Number: ESL-FR-008
• Manufacturer: NTY

Lisainfo: ENG. 1,4,1.6,1.8,2.0 FORD FOCUS 04-, C-MAX 07-, MONDEO IV 07-15, GALAXY II 06-15, S-MAX 06-14, VOLVO C30 06-12, S40 II 04-12, S60 II 10-14, S80 II 08-16, XC60 09-17 /REGULACYJNA, Dœ.CAœK. 373MM Additional information: ENG. 1,4,1.6,1.8,2.0 FORD FOCUS 04-, C-MAX 07-, MONDEO IV 07-15, GALAXY II 06-15, S-MAX 06-14, VOLVO C30 06-12, S40 II 04-12, S60 II 10-14, S80 II 08-16, XC60 09-17 /REGULACYJNA, Dœ.CAœK. 373MM

• Engine Code: NSE
• Oxygen Sensor: Regulating Sensor, Planar Sensor
• Fitting Position: before catalytic converter
• Required quantity: 1
• Number of connectors: 4
• Length [mm]: 210
• Resistor [Ohm]: 9
• Manufacturer: VERNET

• Number of circuits: 4
• Oxygen Sensor: Planar Sensor
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Construction Year from: 01.2001
• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Engine Code: ZVSA
• Cable Length [mm]: 390
• Manufacturer: DELPHI
• Name: DE ES20151-12B1

Additional information: "Tootja: DELPHI
GALAXY (WGR), 03.95-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
GALAXY (WGR), 03.95-
(kvaliteediklass: PJ)"

• Oxygen Sensor: Regulating Sensor, Switching-type Oxygen Sensor
• Construction Year to: 03.2000
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Length [mm]: 375
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.09
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV034
• Manufacturer: ESEN SKV

• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Fitting Position: before catalytic converter
• Quantity: 1
• Engine Code: NSE, ZVSA
• Cable Length [mm]: 375
• Manufacturer: DELPHI
• Name: DE ES20025-12B1
• Additional information: ES20025-12B1 DELPHI
• Lisainfo: ES20025-12B1 DELPHI

• Oxygen Sensor: Regulating Sensor, Switching-type Oxygen Sensor
• Construction Year to: 03.2000
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV096
• Manufacturer: ESEN SKV

• Oxygen Sensor: Regulating Sensor
• Construction Year from: 01.2001
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Weight [kg]: 0.11
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV101
• Manufacturer: ESEN SKV

• Construction Year from: 01.2001
• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Length [mm]: 393
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Fitting Position: before catalytic converter
• Quantity: 1
• Engine Code: NSE
• Alternatively:
• Cable Length [mm]: 620
• Manufacturer: DELPHI

• Fitting Position: Front
• Engine Code: ZVSA
• Oxygen Sensor: Regulating Sensor
• Length [mm]: 525
• Number of connectors: 4
• Manufacturer: VERNET

• Construction Year from: 01.2001
• Engine Code: ZVSA
• Oxygen Sensor: Regulating Sensor
• Guarantee: 5 years guarantee
• Overall Length [mm]: 400
• Number of circuits: 4
• General Information: Sold in Hueco brand: printing and packaging
• Name: HU 135327
• Manufacturer: HITACHI

• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Fitting Position: before catalytic converter
• Quantity: 1
• Engine Code: NSE
• Cable Length [mm]: 620
• Manufacturer: DELPHI
• Name: DE ES20334-12B1

• Construction Year to: 03.2000
• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Engine Code: NSE
• Cable Length [mm]: 375
• Manufacturer: DELPHI
• Name: Lambda sensor
• Quality class: PJ

Additional information: "Tootja: DELPHI
FIESTA IV (JA/, JB/)
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
FIESTA IV (JA/, JB/)
(kvaliteediklass: PJ)"

• Oxygen Sensor: Regulating Sensor, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 400
• Weight [kg]: 0.082
• for OE number: 1 108 795
• Name: SW 33 10 3150
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Resistor [Ohm]: 9
• Number of circuits: 4
• Length [mm]: 740
• Conductor Number: 4
• Cable Length [mm]: 740
• Oxygen Sensor: Heated
• Name: MM OSM117
• Manufacturer: MAGNETI MARELLI

• Length [mm]: 375
• Number of circuits: 4
• Resistor [Ohm]: 9
• Conductor Number: 4
• Cable Length [mm]: 375
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI

• Engine Code: ZVSA
• Construction Year from: 01.2001
• Oxygen Sensor: Regulating Sensor, Unheated
• Fitting Position: Exhaust Manifold
• Number of pins: 4
• Connector Shape: round
• Cable Length [mm]: 330
• for OE number: 1327548
• Manufacturer: MEAT&DORIA

• Oxygen Sensor: Heated, Regulating Sensor
• Cable Length [mm]: 400
• Thread Size: M18 x 1,5
• Number of pins: 4
• Connector Shape: rectangular
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Sensor, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 400
• Weight [kg]: 0.085
• for OE number: 1 300 544
• Name: SW 33 10 3139
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 03.2000
• Oxygen Sensor: Regulating Sensor
• Voltage [V]: 12
• Length [mm]: 375
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Construction Year from: 01.2001
• Oxygen Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 720
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.15
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV577

• Fitting Position: before catalytic converter
• Required quantity: 1
• Engine Code: ZVSA
• Oxygen Sensor: Regulating Sensor
• Cable Length [mm]: 400
• Exhaust System: before catalytic converter
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PA358066251

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: ZVSA
• Construction Year from: 01.2001
• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fitting Position: Exhaust Manifold
• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: M18 x 1,5
• Connector Shape: round
• Length [mm]: 400
• Cable Length [mm]: 400
• Conductor Number: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 401
• Conductor Number: 4
• Number of circuits: 4
• Resistor [Ohm]: 9
• Cable Length [mm]: 401
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI

• Construction Year from: 01.2001
• Engine Code: ZVSA
• Oxygen Sensor: Heated
• Number of pins: 4
• Cable Length [mm]: 600
• Quality: OE EQUIVALENT
• for OE number: 1327547
• Manufacturer: MEAT&DORIA

• Engine Code: NSE, ZVSA
• Construction Year to: 03.2000
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Block Separation:
• Construction Year from: 01.2001
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986615

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Length [mm]: 400
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Engine Code: NSE
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 250
• Conductor Number: 4
• Number of circuits: 4
• Name: EP 1.998.235
• Manufacturer: EPS

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased

• Construction Year to: 08.2000
• Engine Code: NSE
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Oxygen Sensor: Planar Sensor, Heated, Thread pre-greased
• Supplementary Article/Info 2: without plug
• Cable Length [mm]: 210
• Number of circuits: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: ZVSA
• Construction Year from: 01.2001
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986602

• Engine Code: NSE
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 250
• Conductor Number: 4
• Number of circuits: 4
• Manufacturer: FACET

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased

• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Engine Code: ZVSA
• Construction Year from: 01.2001
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Length [mm]: 400
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Oxygen Sensor: Diagnostic Probe, Planar Sensor, Heated
• Fitting Position: after catalytic converter
• Quantity: 1
• Engine Code: ZVSA
• Block Separation:
• Construction Year from: 01.2001
• Cable Length [mm]: 740
• Name: DE ES20517-12B1
• Manufacturer: DELPHI

• Construction Year from: 01.2001
• Engine Code: ZVSA
• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 450
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: 1088851
• Quality: OE
• Weight [g]: 95
• Gross Weight [g]: 128
• Manufacturer: DENSO
• Name: DN DOX-2004
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
FOCUS II KOMBI (DAW/
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
FOCUS II KOMBI (DAW/
(kvaliteediklass: Q)"

• Engine Code: ZVSA
• Construction Year from: 01.2001
• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fitting Position: Exhaust Manifold
• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: M18 x 1,5
• Cable Length [mm]: 320
• Conductor Number: 4
• Connector Shape: round
• Length [mm]: 450
• Number of pins: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 01.2001
• Engine Code: NSE
• Transmission Type: Manual Transmission
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Length [mm]: 450
• Number of circuits: 4
• Manufacturer: VDO

• Construction Year from: 01.2001
• Construction Year to: 04.2006
• Engine Code: NSE
• Fitting Position: before catalytic converter
• Oxygen Sensor: Planar Sensor, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 400
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Manufacturer: VALEO
• Name: VA 368027

• Engine Code: NSE
• Construction Year to: 03.2000
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 400
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• Engine Code: ZVSA
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Socket colour: violet
• Number of circuits: 4
• Oxygen Sensor: Heated, Thread pre-greased
• Connector Shape: round
• Cable Length [mm]: 240
• Thread Size: M18 x 1,5
• for OE number: 2S6A 9G444 BA
• Length [mm]: 300
• Number of connectors: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 01.2001
• Engine Code: ZVSA
• for OE number: 1112475, 1302222
• Thread Size: M18x1.5
• Cable Length [mm]: 725
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 126
• Gross Weight [g]: 159
• Manufacturer: DENSO
• Name: DN DOX-2068
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor

• Engine Code: ZVSA
• Construction Year from: 01.2001
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 400
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Oxygen Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Engine Code: ZVSA
• Construction Year from: 01.2001
• Length [mm]: 800
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Engine Code: ZVSA
• Construction Year from: 01.2001
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 760
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH