• Fitting Position: Front Axle
• Siseläbimõõt [mm]: 79
• Laius (mm): 13,1
• Välisläbimõõt [mm]: 83
• Hammastehulk: 48
• Name: ANDUR,ABS
• Manufacturer: MAX
• Lisainfo: 27-0296
• Additional information: 27-0296

• Fitting Position: Front Axle Left, Front Axle Right
• Construction Year from: 12.2002
• Anduritüüp: Aktiivne andur
• Pikkus (mm): 479
• Pistiku värv: must
• Manufacturer: JP GROUP A/S

• Installatsiooni pool: esisild mõlemapoolselt
• Laius (mm): 13
• Hammastehulk ABS-rõngas: 48
• Siseläbimõõt [mm]: 79
• Välisläbimõõt [mm]: 82,85
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: esisild mõlemapoolselt
• Siseläbimõõt [mm]: 79
• Jämedus/Tugevus (mm): 13,1
• Hammastehulk: 48
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Installatsiooni pool: esisild mõlemapoolselt, rattapool
• Hammastehulk: 48
• Laius (mm): 12, 13
• Siseläbimõõt [mm]: 79
• Välisläbimõõt [mm]: 83
• Seerianumber: NZA-BM-001
• Manufacturer: NTY
• Name: NTY NZA-BM-001

• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaablipikkus (mm): 465
• pikkus üle kõige (mm): 540
• Anduritüüp: Induktiivandur
• Installatsiooni sügavus (mm): 28
• Seerianumber: HCA-FR-017
• Manufacturer: NTY

• Fitting Position: Front Axle
• Siseläbimõõt [mm]: 79
• Laius (mm): 13,1
• Välisläbimõõt [mm]: 83
• Hammastehulk ABS-rõngas: 48
• Name: ANDUR,ABS
• Manufacturer: TRI
• Lisainfo: FORD, SEAT, VOLKSWAGEN
• Additional information: FORD, SEAT, VOLKSWAGEN

• Installatsiooni pool: esisild paremal
• Seerianumber: HCA-FR-014
• Manufacturer: NTY

• Engine Code: NSE
• Construction Year from: 09.1997
• Construction Year to: 03.2000
• Anduritüüp: passiivne andur
• pikkus üle kõige (mm): 550
• Installatsiooni pool: Esisild
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Seerianumber: HCA-FR-018
• Manufacturer: NTY

• Construction Year from: 09.1997
• Construction Year to: 03.2000
• Installatsiooni pool: esisild vasakul, esisild paremal
• Anduritüüp: Induktiivandur
• Manufacturer: JP GROUP A/S
• Lisainfo: ABS sensor, front, left/right
• Additional information: ABS sensor, front, left/right

• Construction Year to: 03.2000
• Installatsiooni pool: Tagasild
• Anduritüüp: passiivne andur
• Kaablipikkus (mm): 1 095
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Installatsiooni pool: Esisild, esisild paremal, esisild vasakul
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle
• Construction Year from: 09.1997
• Construction Year to: 03.2000
• Installatsiooni pool: Tagasild
• Anduritüüp: passiivne andur
• Kaablipikkus (mm): 475
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Siseläbimõõt [mm]: 79
• Välisläbimõõt [mm]: 83
• Hammastehulk ABS-rõngas: 48
• Materjal: Metall
• Installatsiooni pool: Esisild, rattapool
• Kaal (kg): 0,028
• Hooldusinfot jälgida:
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kaablipikkus (mm): 490
• Installatsiooni pool: esisild vasakul, esisild paremal
• Manufacturer: KAMOKA

• Construction Year from: 09.1997
• Construction Year to: 03.2000
• Engine Code: 2,0 EFI
• Installatsiooni pool: Tagasild
• Pikkus (mm): 1 080
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Pistikukatte kuju: ovaalne
• Pinge [V]: 12
• Kaal (kg): 0,14
• Värv: must
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: ENERGY

• Construction Year from: 09.1997
• Construction Year to: 03.2000
• Installatsiooni pool: Esisild
• Kaablipikkus (mm): 560
• Pistikkontaktide arv: 2
• Anduritüüp: Induktiivandur
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Construction Year from: 09.1997
• Construction Year to: 03.2000
• Installatsiooni pool: Tagasild
• Kaablipikkus (mm): 1 125
• Pistikkontaktide arv: 2
• Anduritüüp: Induktiivandur
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Construction Year from: 05.2000
• Construction Year to: 11.2002
• Installatsiooni pool: Esisild
• Pikkus (mm): 470
• Pistikute teostus: Female
• Pistikukatte kuju: ovaalne
• Pinge [V]: 12
• Kaal (kg): 0,12
• Värv: must
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: ENERGY

• Construction Year from: 04.2000
• Construction Year to: 10.2002
• Pikkus (mm): 474
• Anduritüüp: passiivne andur
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Installatsiooni pool: esisild vasakul
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Construction Year from: 04.2000
• Construction Year to: 10.2002
• Pikkus (mm): 474
• Anduritüüp: passiivne andur
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Installatsiooni pool: esisild paremal
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Installatsiooni pool: esisild vasakul, esisild paremal
• Seerianumber: HCA-BM-004
• Manufacturer: NTY

• Engine Code: NSE
• Construction Year from: 09.1997
• Construction Year to: 03.2000
• Anduritüüp: passiivne andur
• pikkus üle kõige (mm): 1 150
• Installatsiooni pool: Tagasild
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Construction Year from: 09.1997
• Construction Year to: 03.2000
• Anduritüüp: passiivne andur
• Kaablipikkus (mm): 475
• Pistikkontaktide arv: 2
• Installatsiooni pool: Esisild
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Construction Year from: 04.2000
• Construction Year to: 10.2002
• Pikkus (mm): 1 026
• Anduritüüp: passiivne andur
• Installatsiooni pool: Tagasild vasakul
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Installatsiooni pool: Tagasild vasakul
• Seerianumber: HCA-FR-016
• Manufacturer: NTY

• Installatsiooni pool: Tagasild paremal
• Seerianumber: HCA-FR-013
• paaris tootenumbrid: HCA-FR-012
• Manufacturer: NTY

• Installatsiooni pool: esisild vasakul
• Seerianumber: HCA-FR-015
• Manufacturer: NTY

• Construction Year from: 04.2000
• Construction Year to: 10.2002
• Installatsiooni pool: Esisild
• Pikkus (mm): 470
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Pistikukatte kuju: ovaalne
• Pinge [V]: 12
• Kaal (kg): 0,1
• Värv: must
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: ENERGY

• Installatsiooni pool: esisild paremal
• Kaablipikkus (mm): 525
• Pistikkontaktide arv: 2
• Anduritüüp: Induktiivandur
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Required quantity: 2
• Fitting Position: Rear Axle
• Construction Year from: 11.2002
• Construction Year to: 04.2006
• Pikkus (mm): 1 031
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Manufacturer: DENCKERMANN HAMULCE

• Fitting Position: Front Axle
• Construction Year from: 04.2000
• Construction Year to: 10.2002
• Installatsiooni pool: esisild paremal
• Anduritüüp: passiivne andur
• Kaablipikkus (mm): 515
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Installatsiooni pool: esisild vasakul, esisild paremal
• Hammastehulk ABS-rõngas: 48
• Siseläbimõõt [mm]: 79
• Laius (mm): 13
• Manufacturer: METZGER

• Construction Year from: 10.1997
• Construction Year to: 04.2000
• Installatsiooni pool: Esisild
• Pikkus (mm): 510
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Pistikukatte kuju: ovaalne
• Garantii: 3 aastat garantii
• Pinge [V]: 12
• Kaal (kg): 0,09
• Värv: must
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV029

• Construction Year to: 03.2000
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Anduritüüp: Induktiivandur
• Lisainfo: ABS sensor, rear, left/right
• Additional information: ABS sensor, rear, left/right

• Construction Year from: 09.1997
• Construction Year to: 03.2000
• Fitting Position: Front Axle
• Anduritüüp: Induktiivandur
• Manufacturer: DELLO AUTOMEGA

• Installatsiooni pool: Esisild
• Kaablipikkus (mm): 650
• Pistikkontaktide arv: 3
• Anduritüüp: passiivne andur
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: Tagasild vasakul
• Kaablipikkus (mm): 1 095
• Pistikkontaktide arv: 2
• Anduritüüp: Induktiivandur
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle Left, Front Axle Right
• Construction Year from: 05.2000
• Construction Year to: 11.2002
• Anduritüüp: passiivne andur
• Pikkus (mm): 474
• Pistiku värv: must

• Construction Year to: 03.2000
• Fitting Position: Rear Axle
• Anduritüüp: Induktiivandur
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle
• Construction Year from: 04.2000
• Construction Year to: 10.2002
• Installatsiooni pool: Tagasild vasakul
• Anduritüüp: passiivne andur
• Kaablipikkus (mm): 1 115
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Installatsiooni pool: Tagasild paremal
• Kaablipikkus (mm): 1 026
• Pistikkontaktide arv: 6
• Anduritüüp: Induktiivandur
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Seerianumber: HCA-VW-039
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: koos kaabliga
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Pistikkontaktide arv: 4
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Manufacturer: NTY

• Construction Year from: 09.1997
• Construction Year to: 03.2000
• Installatsiooni pool: Tagasild
• Pikkus (mm): 1 080
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Pistikukatte kuju: ovaalne
• Garantii: 3 aastat garantii
• Pinge [V]: 12
• Kaal (kg): 0,14
• Värv: must
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV030

• Installatsiooni pool: esisild vasakul, esisild paremal, Esisild
• Kaablipikkus (mm): 460
• Installatsiooni sügavus (mm): 28
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Seerianumber: HCA-FR-019
• Manufacturer: NTY

• Construction Year from: 09.1997
• Construction Year to: 03.2000
• Anduritüüp: passiivne andur
• Kaablipikkus (mm): 1 075
• Pistikkontaktide arv: 2
• Installatsiooni pool: Tagasild
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Required quantity: 2
• Construction Year from: 10.1997
• Construction Year to: 04.2000
• Fitting Position: Front Axle
• Piirangutega toode/piirangu info 2: koos kaabliga
• Manufacturer: BREMI

• Fitting Position: Rear Axle Left, Rear Axle Right
• Construction Year from: 12.2002
• Anduritüüp: Aktiivne andur
• Pikkus (mm): 1 031
• Pistiku värv: must

• Construction Year from: 09.1997
• Installatsiooni pool: esisild vasakul, esisild paremal
• Piirangutega toode/piirangu info 2: koos kaabliga
• Pikkus (mm): 555
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: esisild vasakul, esisild paremal
• Pikkus (mm): 530
• Anduritüüp: passiivne andur
• Kaal (kg): 0,072
• Manufacturer: TOMEX C

• Engine Code: NSE
• Construction Year from: 09.1997
• Construction Year to: 03.2000
• Fitting Position: Front Axle both sides
• Number of connectors: 2
• Manufacturer: JPN

• Construction Year from: 09.1997
• Construction Year to: 10.2002
• Installatsiooni pool: Tagasild
• Pikkus (mm): 1 040
• Pistikute teostus: Female
• Pistikukatte kuju: ovaalne
• Pinge [V]: 12
• Kaal (kg): 0,17
• Värv: must
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: ENERGY

• Engine Code: ZVSA
• Construction Year from: 11.2002
• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaablipikkus (mm): 490
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Fitting Position: Front Axle
• Construction Year from: 09.1997
• Construction Year to: 03.2000
• Anduritüüp: passiivne andur
• kasutatud klemmide arv: 2
• Kaablipikkus (mm): 475
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP
• Quality class: PJ

• Construction Year from: 04.2000
• Construction Year to: 10.2002
• Pikkus (mm): 1 026
• Anduritüüp: passiivne andur
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Installatsiooni pool: Tagasild paremal
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Rear Axle
• Construction Year from: 04.2000
• Construction Year to: 10.2002
• Wear Warning Contact: prepared for wear warning indicator
• Installatsiooni pool: Tagasild paremal
• Anduritüüp: passiivne andur
• Kaablipikkus (mm): 1 210
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Fitting Position: Rear Axle Left, Rear Axle Right
• Construction Year to: 11.2002
• Pistikkontaktide arv: 4
• Piirangutega toode/piirangu info 2: koos kaabliga
• pin'ide arv: 2
• Pikkus (mm): 1 163
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: ZVSA
• Fitting Position: Rear Axle both sides
• Cable Length [mm]: 1,110
• Number of connectors: 2, 4
• Manufacturer: JPN

• Fitting Position: Front Axle Left, Front Axle Right
• Construction Year to: 11.2002
• Piirangutega toode/piirangu info 2: koos kaabliga
• Pikkus (mm): 558
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Kaablipikkus (mm): 1 090
• Installatsiooni pool: Tagasild
• Manufacturer: KAMOKA

• Required quantity: 2
• Construction Year from: 05.2000
• Construction Year to: 11.2002
• Fitting Position: Front Axle
• Piirangutega toode/piirangu info 2: koos kaabliga
• Manufacturer: BREMI

• Fitting Position: Rear Axle
• Construction Year from: 05.2000
• Construction Year to: 11.2002
• Colour: black
• Sensor Type: Active sensor
• Length [mm]: 1,026
• Manufacturer: JPN

• Engine Code: ZVSA
• Construction Year from: 11.2002
• Fitting Position: Rear Axle both sides
• Cable Length [mm]: 1,090
• Number of connectors: 2
• Manufacturer: JPN

• Engine Code: ZVSA
• Construction Year from: 11.2002
• Fitting Position: Front Axle both sides
• Cable Length [mm]: 490
• Number of connectors: 2
• Manufacturer: JPN

• Installatsiooni pool: esisild vasakul, esisild paremal
• Pistikkontaktide arv: 2
• Kaablipikkus (mm): 470
• Anduritüüp: passiivne andur
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0464

• Installatsiooni pool: Esisild, esisild paremal, esisild vasakul
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle
• Construction Year to: 03.2000
• Anduritüüp: passiivne andur
• kasutatud klemmide arv: 2
• Kaablipikkus (mm): 1 095
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP
• Quality class: PJ

• Engine Code: ZVSA
• Construction Year from: 11.2002
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kaablipikkus (mm): 1 090
• Name: CZUJNIK ABS VW T. SHARAN 95- LE/PR
• Manufacturer: MAX

• Installatsiooni pool: Esisild
• Jämedus/Tugevus (mm): 13
• Siseläbimõõt [mm]: 79
• Hammastehulk ABS-rõngas: 48
• Name: ANDUR,ABS
• Manufacturer: MEY

• Construction Year from: 10.1997
• Construction Year to: 04.2000
• Fitting Position: Front Axle
• Required quantity: 2
• Kaablipikkus (mm): 500
• Installatsiooni sügavus (mm): 28,2
• Pistikkontaktide arv: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Installatsiooni pool: Esisild, esisild vasakul
• paaris tootenumbrid: GH-702514H
• Manufacturer: AUTO-GH

• Installatsiooni pool: Esisild, esisild paremal
• paaris tootenumbrid: GH-702514V
• Manufacturer: AUTO-GH

• Construction Year from: 04.2000
• Construction Year to: 10.2002
• Installatsiooni pool: Esisild
• Pikkus (mm): 470
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Pistikukatte kuju: ovaalne
• Garantii: 3 aastat garantii
• Pinge [V]: 12
• Kaal (kg): 0,1
• Värv: must
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV113

• Engine Code: NSE
• Construction Year from: 09.1997
• Construction Year to: 03.2000
• Ühenduste arv: 2
• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaal (kg): 0,6
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 09.1997
• Required quantity: 2
• Pinge [V]: 12
• Takistus [oom]: 1 130
• Kaablipikkus (mm): 1 070
• Anduritüüp: Induktiivandur
• Installatsiooni pool: Tagasild
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Kaablipikkus (mm): 525
• Anduritüüp: Induktiivandur
• Pistikkontaktide arv: 2
• Vastab originaalosa värvile: must
• Installatsiooni pool: Esisild
• Manufacturer: FAE

• Required quantity: 2
• Production date from: 01.04.2000
• Production date to: 30.11.2002
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Nominaalpinge (V): 12
• Installatsiooni pool: esisild paremal
• Pikkus (mm): 550
• Takistus [oom]: 1 120
• Kaablipikkus (mm): 468
• Anduritüüp: Induktiivandur, passiivne andur
• Pistikkontaktide arv: 4
• Piirangutega toode/piirangu info 2: koos kaabliga
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Kaablipikkus (mm): 1 130
• Anduritüüp: Induktiivandur
• Pistikkontaktide arv: 2
• Vastab originaalosa värvile: must
• Installatsiooni pool: Tagasild
• Manufacturer: FAE

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Construction Year from: 10.1997
• Construction Year to: 04.2000
• pikkus üle kõige (mm): 545
• Pikkus (mm): 28
• Anduritüüp: passiivne andur
• Pistiku värv: must
• Kaablipikkus (mm): 470
• paaris tootenumbrid: 30026
• Kaal (kg): 0,13
• Manufacturer: ABS

• Construction Year from: 11.2002
• Installatsiooni pool: Esisild
• Garantii: 5 aastat garantii
• Manufacturer: HUCO
• Name: HU 131408

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Pikkus (mm): 1 130
• Anduritüüp: passiivne andur
• Kaal (kg): 0,117
• Manufacturer: TOMEX C

• Required quantity: 2
• Construction Year from: 05.2000
• Construction Year to: 11.2002
• Fitting Position: Rear Axle
• Piirangutega toode/piirangu info 2: koos kaabliga
• Manufacturer: BREMI

• Construction Year from: 05.2000
• Construction Year to: 11.2002
• Installatsiooni pool: Esisild
• Pikkus (mm): 470
• Pistikute teostus: Female
• Pistikukatte kuju: ovaalne
• Garantii: 3 aastat garantii
• Pinge [V]: 12
• Kaal (kg): 0,12
• Värv: must
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 06SKV114
• Manufacturer: ESEN SKV

• Construction Year to: 09.1997
• Installatsiooni pool: Esisild
• Pikkus (mm): 500
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Garantii: 3 aastat garantii
• Pinge [V]: 12
• Kaal (kg): 0,11
• Rakendustüüp: elektriline
• Pistiku värv: must
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV339

• Fitting Position: Front Axle
• Construction Year from: 12.2002
• pikkus üle kõige (mm): 540
• Pikkus (mm): 28
• Anduritüüp: Aktiivne andur
• Pistiku värv: must
• Kaablipikkus (mm): 479
• paaris tootenumbrid: 30402
• Kaal (kg): 0,09
• Manufacturer: ABS

• Engine Code: NSE
• Ühenduste arv: 2
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kaal (kg): 0,5
• Manufacturer: FEBI HAMULCE

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 11.2002
• Installatsiooni pool: Esisild
• Garantii: 5 aastat garantii
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Kaablipikkus [m]: 0,47
• Manufacturer: HUCO

• Construction Year from: 04.2000
• Construction Year to: 10.2002
• Installatsiooni pool: Tagasild
• Pikkus (mm): 1 050
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Pistikukatte kuju: ovaalne
• Garantii: 3 aastat garantii
• Pinge [V]: 12
• Kaal (kg): 0,15
• Värv: must
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 06SKV110
• Manufacturer: ESEN SKV

• Fitting Position: Rear Axle
• Construction Year to: 04.2000
• pikkus üle kõige (mm): 1 165
• Pikkus (mm): 28
• Anduritüüp: passiivne andur
• Pistiku värv: must
• Kaablipikkus (mm): 1 090
• paaris tootenumbrid: 30027
• Kaal (kg): 0,12
• Manufacturer: ABS

• Fitting Position: Front Axle
• Construction Year to: 09.1997
• pikkus üle kõige (mm): 550
• Pikkus (mm): 28
• Anduritüüp: passiivne andur
• Pistiku värv: must
• Kaablipikkus (mm): 470
• paaris tootenumbrid: 30153
• Kaal (kg): 0,07
• Manufacturer: ABS

• Construction Year from: 11.2002
• Construction Year to: 04.2006
• Installatsiooni pool: Esisild
• Pikkus (mm): 500
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Garantii: 3 aastat garantii
• Pinge [V]: 12
• Kaal (kg): 0,09
• Rakendustüüp: elektriline
• Pistiku värv: must
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV275