• Fitting Position: Rear Axle, Upper
• Fabrication Number: ZTT-FR-006A

• Fitting Position: Rear Axle
• Fabrication Number: ZTT-MZ-007A
• Manufacturer: NTY

• Fitting Position: outer, Rear Axle, inner, Left, Right, Lower
• Weight [g]: 102
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 32
• Name: IM 1435
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Rear Axle Lower, Centre
• Name: Puks
• Manufacturer: MAX

• Fitting Position: inner, Rear Axle Lower, in front of axle
• Name: Puks
• Manufacturer: MAX

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
FORD FOCUS
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
FORD FOCUS
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle Lower, outer, Lower
• Width [mm]: 36
• Height [mm]: 36
• Height 1 [mm]: 45
• Outer Diameter 1 [mm]: 36.4
• Inner Diameter 1 [mm]: 12.3
• Manufacturer: GSP

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
FORD FOCUS
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
FORD FOCUS
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle Lower, outer, Lower
• Height [mm]: 55
• Inner Diameter [mm]: 12.3
• Outer Diameter [mm]: 32.7
• Manufacturer: GSP

• for model code: CBS
• Weight [kg]: 0.121
• Packaging length [cm]: 9.7
• Packaging width [cm]: 2.7
• Packaging height [cm]: 2.7
• Manufacturer: FEBEST

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Quality class: PJ
• Name: Control arm bush left=right

Lisainfo: "Tootja: TEKNOROT
VW T4 '91-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW T4 '91-
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle Left, Rear Axle Right, inner, Lower
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 32.5
• Length [mm]: 55
• paired article number: 271429
• Weight [kg]: 0.17
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: inner, Rear Axle Lower, in front of axle
• Weight [kg]: 0.115
• Packaging length [cm]: 3.5
• Packaging width [cm]: 3.5
• Packaging height [cm]: 3.5
• Manufacturer: FEBEST

• Fitting Position: Rear Axle both sides
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36
• Height [mm]: 35
• Name: ALT 91241AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: inner, Rear Axle Lower
• Outer Diameter [mm]: 33
• Inner Diameter [mm]: 12
• Name: Puks
• Manufacturer: MAX

• Fitting Position: outer, Rear Axle, inner, Left, Upper, Right
• Material: Metal
• Control/Trailing Arm Type: for control arm
• Weight [g]: 124
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36
• Length [mm]: 28
• Overall Length [mm]: 35
• Name: IM 1205
• Manufacturer: ORIGINAL IMPERIUM

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
FORD FOCUS
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
FORD FOCUS
(kvaliteediklass: PJ)"

• Production date to: 201912
• for OE number: C273-34-300B, C273-34-350B
• Fitting Position: Front, inner, Lower Front Axle
• Name: Puks
• Manufacturer: MAX

• Fitting Position: Centre, Rear Axle Lower
• Weight [kg]: 0.14
• Packaging length [cm]: 4
• Packaging width [cm]: 4
• Packaging height [cm]: 3.5
• Manufacturer: FEBEST

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
MAZDA 3
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
MAZDA 3
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, Centre
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.27
• Name: DY 37-09700-6
• Manufacturer: DYS

• Fitting Position: Rear Axle both sides, Lower, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 37
• Height [mm]: 45
• Name: ALT 91244AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: inner, Rear Axle Lower
• Length [mm]: 55
• Weight [kg]: 0.186
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 33
• Packaging length [cm]: 5.5
• Packaging width [cm]: 3.2
• Packaging height [cm]: 3.2
• Manufacturer: FEBEST

• Weight [kg]: 0.13
• Fitting Position: Rear Axle both sides, Lower, Rear
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 36.5
• Length [mm]: 35
• Manufacturer: RTS

• Fitting Position: Front Axle, Lower, Front
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 38
• Height [mm]: 65
• Name: ALT 88833AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: outer, Rear Axle Lower
• Weight [kg]: 0.176
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36
• Packaging length [cm]: 4.5
• Packaging width [cm]: 3.6
• Packaging height [cm]: 3.6
• Manufacturer: FEBEST

• for OE number: C273-34-300B, C273-34-350B
• Fitting Position: inner, Lower Front Axle, Front
• Weight [kg]: 0.285
• Packaging length [cm]: 6.5
• Packaging width [cm]: 5.4
• Packaging height [cm]: 5.4
• Manufacturer: FEBEST

• Weight [kg]: 0.27
• Fitting Position: Front Axle both sides, Lower, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 38.2
• Inner Diameter [mm]: 14.2
• Length [mm]: 65
• Manufacturer: RTS

• Inner Diameter [mm]: 12.3
• Outer Diameter [mm]: 36.3
• Length [mm]: 35
• paired article number: 271431
• Weight [kg]: 0.13
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: Rear Axle Left, Rear Axle Right, inner, outer, Upper

• Fitting Position: Rear Axle, Lower, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 33
• Height [mm]: 55
• Name: ALT 91245AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle Left, Rear Axle Right, outer, Lower
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 36.1
• Length [mm]: 45
• paired article number: 271430
• Weight [kg]: 0.16
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle, Left, Right
• Weight [g]: 476
• Outer Diameter [mm]: 60
• Overall Length [mm]: 142
• Manufacturer: IMPERGOM
• Additional information: 1445 IMP
• Lisainfo: 1445 IMP

• suitable for rim size [inch]: 18, 19
• Fitting Position: Front Axle Right, Front Axle Left
• Height [mm]: 65
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 38
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEY

Name: Puks - K„„ndmik FORD P. FOCUS III/C-MAX II/GRAND C-MAX 10-

• Fitting Position: Rear Axle, Lower, in front of axle
• Manufacturer: DELPHI
• Name: DE TD1782W

• Fitting Position: Rear Axle, both sides
• Name: Puks
• Manufacturer: MAX

• Fitting Position: Lower Front Axle, Rear
• Weight [kg]: 0.488
• Packaging length [cm]: 6.8
• Packaging width [cm]: 6.8
• Packaging height [cm]: 6.4
• Manufacturer: FEBEST

• Fitting Position: Rear Axle, Left, Right
• Material: Rubber/Metal
• Length [mm]: 142
• Outer Diameter [mm]: 60
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle, Lower, Front, inner, outer, both sides
• Control/Trailing Arm Type: for control arm
• Required quantity: 4
• Manufacturer: TEDGUM_TD

• Fitting Position: Rear Axle, Upper, inner, outer, both sides
• Required quantity: 4
• Material: PU (Polyurethane)
• Manufacturer: TEDGUM_TD

• Fitting Position: Rear Axle Upper, Front
• Weight [kg]: 0.508
• Packaging length [cm]: 14.2
• Packaging width [cm]: 6.1
• Packaging height [cm]: 6.1
• Manufacturer: FEBEST

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Quality class: PJ
• Name: Control arm bush left=right

Lisainfo: "Tootja: TEKNOROT
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
(kvaliteediklass: PJ)"

• suitable for rim size [inch]: 18, 19
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Hydro Mount
• Name: Puks
• Manufacturer: MAX
• Lisainfo: MGZ-505041
• Additional information: MGZ-505041

• Fitting Position: Left, Right, Front Axle
• Control/Trailing Arm Type: for control arm
• Mounting Type: Hydro Mount, Rubber-Metal Mount
• Weight [g]: 1,379
• Inner Diameter [mm]: 21
• Outer Diameter [mm]: 87
• Length [mm]: 93
• Name: IM 1443
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Rear, Lower Front Axle
• Height [mm]: 73
• Inner Diameter [mm]: 22
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Control arm bush left=right

• Inner Diameter [mm]: 22
• Outer Diameter [mm]: 54
• Length [mm]: 72.5
• Mounting Type: Hydro Mount
• paired article number: 271147
• Weight [kg]: 1.39
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: behind the axle, Front Axle Left, Front Axle Right, Lower

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
FORD FOCUS II
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
FORD FOCUS II
(kvaliteediklass: PJ)"

• Fitting Position: Lower Front Axle, Left
• Weight [kg]: 1.337
• Mounting Type: Hydro Mount
• Packaging length [cm]: 16
• Packaging width [cm]: 13.6
• Packaging height [cm]: 8.5
• Manufacturer: FEBEST

• suitable for rim size [inch]: 18, 19
• Fitting Position: Front Axle Right, Front Axle Left
• Height [mm]: 73
• Inner Diameter [mm]: 22
• Mounting Type: Hydro Mount
• Supplementary Article/Supplementary Info: with holder
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEY

Name: Puks - K„„ndmik FORD P. FOCUS III/C-MAX II/GRAND C-MAX 10- LE/PR

• Weight [kg]: 1.35
• Fitting Position: Front Axle both sides, Lower, Rear
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Length [mm]: 90
• Outer Diameter [mm]: 73
• Inner Diameter [mm]: 21
• Manufacturer: RTS

• Fitting Position: Lower Front Axle, Right
• Weight [kg]: 1.346
• Mounting Type: Hydro Mount
• Packaging length [cm]: 16
• Packaging width [cm]: 13.6
• Packaging height [cm]: 8.5
• Manufacturer: FEBEST

• Fitting Position: Front Axle, Lower, Rear
• Inner Diameter [mm]: 22
• Height [mm]: 71
• Name: ALT 88831AL
• Manufacturer: ALTE AUTOMOTIVE

• suitable for rim size [inch]: 18, 19
• Fitting Position: Front Axle Right, Front Axle Left
• Height [mm]: 73
• Inner Diameter [mm]: 22
• Mounting Type: Hydro Mount
• Supplementary Article/Supplementary Info: with attachment material, with holder
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEY

Name: Puks - K„„ndmik FORD P. FOCUS III/C-MAX II/GRAND C-MAX 10- LE/PR ZE —RUBAMI

• suitable for rim size [inch]: 18, 19
• Fitting Position: Front Axle Right, Front Axle Left
• Height [mm]: 73
• Inner Diameter [mm]: 22
• Supplementary Article/Supplementary Info: with holder
• reinforced version:
• Required quantity: 2
• Replace in pairs only:
• with environmental seal: Carbon neutral
• Name: Puks
• Manufacturer: MEY

General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Name: Puks
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!