• Fabrication Number: ESL-FT-004
• Manufacturer: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Thread pre-greased

• Engine Code: 843 A1.000
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MAX

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-AR-000
• Manufacturer: NTY
• Name: NTY ECP-AR-000

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV499
• Manufacturer: ESEN SKV

• Number of pins: 2
• Housing Colour: green
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 4
• Fabrication Number: ECM-FT-000
• Manufacturer: NTY

• Pressure from [kPA]: 10
• Pressure to [kPA]: 11
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: 843 A1.000
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.830.326K, 1.880.672, 1.880.699, 1.880.701, 1.880.758, 1.880.938

• Colour: black
• Number of pins: 4
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MAX

• Engine Code: 843 A1.000
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 7.3326K, 7.8672, 7.8699, 7.8701, 7.8758, 7.8938
• Manufacturer: FACET

• Fabrication Number: ESS-FT-002
• Manufacturer: NTY

• Engine Code: 843 A1.000
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 27.8
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Number of pins: 2
• Housing Colour: brown
• Manufacturer: FAE

• Mounting Type: Bolted
• Voltage [V]: 12
• Number of pins: 2
• Corresponds to the original part in colour: brown
• Thread Size: M12x1,5
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009309241
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Height [mm]: 28
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Number of pins: 2
• Socket colour: brown
• Thread Size: M12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19
• for OE number: 55190791
• Manufacturer: MEAT&DORIA

• Pressure from [kPA]: 10
• Pressure to [kPA]: 118
• Manufacturer: FAST

• Guarantee: 3 years guarantee
• Weight [kg]: 0.03
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.03
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV107

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV108

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 28
• for OE number: 46798368
• Manufacturer: MEAT & DORIA

• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FAST

• Fitting Position: Suction Pipe
• Connector Shape: oval
• Number of pins: 4
• Sensor Type: NTC Sensor
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Pressure from [kPA]: 10
• Pressure to [kPA]: 118
• Quality: OE EQUIVALENT
• for OE number: 71732447
• Manufacturer: MEAT&DORIA

• Engine Code: 843 A1.000
• Name: EP 1.957.006
• Manufacturer: EPS

• Engine Code: 843 A1.000
• Manufacturer: FACET

• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: BOS

• Guarantee: 5 years guarantee
• Number of pins: 4
• Manufacturer: HUCO

• Alternatively:
• Number of pins: 2
• Alternative Repair Kit: 550305
• Manufacturer: ERA

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

Manufacturer: MAGNETI MARELLI

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PG013114441

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Measuring Range from [kPa]: 10
• Measuring Range to [kPa]: 115
• Measuring Range from [V]: 0.4
• Measuring Range to [V]: 4.65
• Number of connectors: 4
• Manufacturer: VERNET

• Guarantee: 5 years guarantee
• Number of pins: 3
• Sensor Type: Hall Sensor
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Connector Shape: oval
• Number of pins: 4
• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: oval
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PG013114341
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• Name: DETONATSIOONIANDUR
• Manufacturer: DLP

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Sensor Type: Piezoelectric Sensor
• Number of pins: 2
• Name: Detonatsiooniandur
• Manufacturer: MEY

• Temperature range from [°C]: -40
• Temperature range to [°C]: 130
• Manufacturer: BOSCH

• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Length [mm]: 52
• Inner Diameter [mm]: 8.4
• Number of connectors: 2
• Material: Plastic, Metal
• Weight [kg]: 0.045
• Name: DETONATSIOONIANDUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Housing Colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: without cable
• Manufacturer: VDO

• Engine Code: 843 A1.000
• Name: EP 1.953.619
• Manufacturer: EPS

• Thickness [mm]: 43.45
• Outer Diameter [mm]: 12.9
• Number of connectors: 4
• Weight [kg]: 0.025
• for OE number: 006 153 47 28
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11146

• Number of pins: 3
• Fitting Depth [mm]: 28.2
• Supplementary Article/Info 2: with seal ring
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead, 872-50-4; 1-Methyl-2-pyrrolidone
• Manufacturer: HELLA
• Name: HE 6PU009168081

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: 843 A1.000
• Fitting Position: Front, before catalytic converter
• Oxygen Sensor: Regulating Sensor, Heated
• Number of circuits: 4
• Length [mm]: 350
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: 843 A1.000
• Pressure from [kPA]: 10
• Pressure to [kPA]: 118
• Output Voltage, from [V]: 0.385
• Output Voltage, up to [V]: 4.7
• Name: EP 1.993.091
• Manufacturer: EPS

• Engine Code: 843 A1.000
• Pressure from [kPA]: 10
• Pressure to [kPA]: 118
• Output Voltage, from [V]: 0.385
• Output Voltage, up to [V]: 4.7
• Manufacturer: FACET

• Construction Year to: 02.2015
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Manufacturer: VALEO

• Colour: black
• Number of pins: 4
• Pressure from [kPA]: 10
• Pressure to [kPA]: 115
• Manufacturer: FAE

• Number of pins: 3
• Pressure from [kPA]: 10
• Pressure to [kPA]: 117
• Manufacturer: FAE

• Number of pins: 4
• Pressure from [kPA]: 10
• Pressure to [kPA]: 115
• Manufacturer: FAE

• Number of pins: 4
• Pressure from [kPA]: 10
• Pressure to [kPA]: 115
• Manufacturer: VDO

• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 385
• Manufacturer: DELPHI

Additional information: "Tootja: DELPHI
SEICENTO (187), 01.9
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
SEICENTO (187), 01.9
(kvaliteediklass: PJ)"

• Number of pins: 4
• Pressure from [kPA]: 13
• Manufacturer: DELPHI ELEKTRONIKA

• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Heated
• Emission Standard: Euro 4 (D4), Euro 5
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

Fitting Position: before catalytic converter, after catalytic converter

• Oxygen Sensor: Switching-type Oxygen Sensor
• Length [mm]: 972
• Number of circuits: 4
• Manufacturer: FAST

• Manufacturer Restriction: Fiat
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Number of pins: 6
• Cable Cross Section [mm²]: 0.75
• Cable Length [mm]: 200
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, gaasipedaaliandur
• Manufacturer: HBE

• Length [mm]: 350
• Resistor [Ohm]: 9
• Conductor Number: 4
• Number of circuits: 4
• Cable Length [mm]: 350
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Sensor Type: Hall Sensor
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: FAE

• Oxygen Sensor: Diagnostic Probe, Planar Sensor, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 540
• Name: DE ES20516-12B1
• Manufacturer: DELPHI

• Oxygen Sensor: Regulating Sensor, Heated
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 350
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Pressure [Pa] from: 10,000
• Pressure [Pa] to: 118,000
• Voltage [V]: 5
• Resistor [Ohm]: 2,080
• Number of pins: 4
• Sensor Type: NTC Sensor
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PP009400311
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Emission Standard: Euro 4 (D4), Euro 5
• Number of circuits: 4
• Overall Length [mm]: 325
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Fitting Position: before catalytic converter
• Emission Standard: Euro 5, Euro 4 (D4)
• Oxygen Sensor: Regulating Sensor, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 430
• Weight [kg]: 0.084
• Name: SW 33 10 3140
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 300
• Name: DE ES20302-12B1
• Manufacturer: DELPHI

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Length [mm]: 310
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 3.5
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV595
• Manufacturer: ESEN SKV

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Length [mm]: 300
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 540
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Oxygen Sensor: Regulating Sensor, Diagnostic Probe
• Emission Standard: Euro 4 (D4), Euro 5
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: Front
• Length [mm]: 630
• Number of connectors: 4
• Manufacturer: VERNET

• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 400
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: 46751082
• Quality: OE
• Weight [g]: 113
• Gross Weight [g]: 146
• Manufacturer: DENSO
• Name: DN DOX-2006

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
IDEA, 12.03-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
IDEA, 12.03-
(kvaliteediklass: Q)"

• Oxygen Sensor: Regulating Sensor, Diagnostic Probe
• Emission Standard: Euro 6, Euro 6d
• Block Separation:
• Overall Length [mm]: 300
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Emission Standard: Euro 4 (D4), Euro 5
• Number of circuits: 4
• Overall Length [mm]: 560
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS