Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- for OE number: 240660144
- Manufacturer: MEAT & DORIA
- Piirangutega toode/piirangu info: koos lisadega
- Pistikkontaktide arv: 5
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 5
-
Kaal (kg): 0,
04 - Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Name: CE 53SKV124
- Manufacturer: ESEN SKV
- Number of circuits: 1
- Length [mm]: 150
- Connector Shape: round
- Cable insulation material: Silicone
- Cross Section [mm²] from: 2.5
- for OE number: 240660002
- Manufacturer: MEAT & DORIA
- Additional information: 25002 MD
- Lisainfo: 25002 MD
- Number of circuits: 1
- Length [mm]: 150
- Connector Shape: round
- Cable insulation material: Silicone
- Cross Section [mm²] from: 2.5
- for OE number: 240660016
- Manufacturer: MEAT&DORIA
- Additional information: 25026 MD
- Lisainfo: 25026 MD
- Fitting Position: Engine Compartment
- Cable Length [mm]: 0
-
Mounting Type: Plug-
in connection - Supplementary Article/Supplementary Info: with plug insert
- short version:
- Number of circuits: 1
- Weight [kg]: 0.009
- Supplementary Article/Info 2: with multi plug
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Engine Compartment
- Cable Length [mm]: 250
-
Mounting Type: Plug-
in connection - Supplementary Article/Supplementary Info: with shrink connector
- Supplementary Article/Info 2: with plug
- Number of circuits: 4
- Weight [kg]: 0.044
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Injector Nozzle
- Cable Length [mm]: 500
- Supplementary Article/Supplementary Info: with shrink connector
- Number of circuits: 2
- Weight [kg]: 0.05
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Cable Length [mm]: 100
- Supplementary Article/Info 2: without bellow
- Number of circuits: 2
- Weight [kg]: 0.021
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 12.2011
- Fuel Mixture Formation: Direct Injection
- Block Separation:
- Sissepritsesüsteem: Common Rail
- Installatsiooni pool: Mootoriruum
- Ülekandeliinide arv: 3
- Kaablipikkus (mm): 180
- Pistikute teostus: Surveliides
- Pistikukatte kuju: nurgeline
- juhtmeisolatsiooni materjal: Silikoon
-
Materjal: CuSn
(vask- tina) - Manufacturer: METZGER
-
paired article number: 10.6040,
10.6043, 10.6073 - Manufacturer: MEAT&DORIA
- Küte/Jahutus: orig.tehase kliimaseadmega sõidukile
- Ülekandeliinide arv: 4
- Kaablipikkus (mm): 100
- Pistikute teostus: Surveliides
- Pistikukatte kuju: nurgeline
-
Kaabli ristlõige [mm²]: 1,
5, 4 - juhtmeisolatsiooni materjal: Silikoon
-
Materjal: CuSn
(vask- tina) - Toode tuleb kindlaks määrata sõidukil või mootoril:
- soovitava lisavarustuse artiklinumber: 0917108
- Manufacturer: METZGER
- Installatsiooni pool: Salongipuhuri ja takisti vahel
- juhtmeisolatsiooni materjal: Silikoon
- Piirangutega toode/piirangu info 2: koos pistikuga
- Kaablipikkus (mm): 100
- Ülekandeliinide arv: 4
- Kaabli ristlõige [mm²]: 4
-
Materjal: CuSn
(vask- tina) - Pistikute teostus: Surveliides
- Manufacturer: METZGER
- Fitting Position: Vehicle Tailgate
- Cable insulation material: Silicone
- Length [mm]: 280
- Number of pins: 15
- Manufacturer: MEAT&DORIA
- Fitting Position: Vehicle Tailgate
- Cable Length [mm]: 250
- Supplementary Article/Supplementary Info: with hose
- Supplementary Article/Info 2: with bellow
- Number of circuits: 14
- Weight [kg]: 0.07
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks