• Supplementary Article/Info 2: with integrated air temperature sensor
• Fabrication Number: ECM-PL-000
• Manufacturer: NTY
• Name: NTY ECM-PL-000

• Engine Code: 199 A3.000
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: EP 1.830.261
• Manufacturer: EPS

for article number: 1.830.233K, 1.880.115, 1.880.179, 1.880.180, 1.880.405, 1.880.411, 1.880.572, 1.880.580, 1.880.581, 1.880.582, 1.880.585, 1.880.639, 1.880.660, 1.880.669, 1.880.670, 1.880.673, 1.880.675

• Construction Year to: 12.2009
• Number of pins: 2
• Housing Colour: green
• Weight [kg]: 0.03
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 12.2009
• for OE number: 55 190 791
• Length [mm]: 62
• Thread Size: M12 x 1,5
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Weight [kg]: 0.03
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: 199 A3.000
• Emission Standard: Euro 5
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Emission Standard: Euro 5
• Transmission Type: Manual Transmission
• Fabrication Number: ECS-AU-000
• Manufacturer: NTY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Engine Code: 199 A3.000
• Emission Standard: Euro4/Euro5
• Block Separation:
• for OE number: 13 38 359
• Weight [kg]: 0.015
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M12x1,5
• Spanner Size: 19
• Number of pins: 2
• Mounting Type: Screw Connection
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT013113091
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Thread Size: M 12x1,5
• Number of pins: 2
• Housing Colour: green
• Sensor Type: NTC Sensor
• Manufacturer: FAE

• for OE number: 55216241
• Length [mm]: 62
• Fabrication Number: ECP-AR-011
• Manufacturer: NTY

• Construction Year to: 11.2006
• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Pressure from [kPA]: 20
• Pressure to [kPA]: 300
• for OE number: 55206797, 6238865, 1611432480, EL8A-9F479-CA
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Transmission Type: Automatic Transmission
• Fabrication Number: ECS-ME-000

• Number of pins: 4
• Pressure from [kPA]: 27
• Manufacturer: DELPHI
• Name: DE PS10144

• Construction Year to: 11.2006
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 4
• Weight [kg]: 0.04
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV113

• Number of pins: 3
• Diameter 1 [mm]: 6
• Diameter 2 [mm]: 8
• Fabrication Number: ECS-PL-002
• Manufacturer: NTY

• Height [mm]: 28
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Alternatively:
• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Alternative Repair Kit: 550734
• Fitting Depth [mm]: 22
• Manufacturer: ERA

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black/grey
• Manufacturer: BREMI

• Housing Colour: black
• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 28
• for OE number: 55201876, 1247060
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Height [mm]: 36.5
• Resistor [Ohm]: 850
• Number of connectors: 2
• Manufacturer: VERNET

• Construction Year from: 12.2006
• Construction Year to: 12.2009
• Number of pins: 4
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Supplementary Article/Info 2: with integrated air temperature sensor
• for OE number: 55219298, 22 36 500 02R
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Model Year from: 2008
• Material: Plastic
• Number of connectors: 3
• Weight [kg]: 0.021
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fabrication Number: ECS-FT-001
• Manufacturer: NTY

Manufacturer: MAGNETI MARELLI

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Manufacturer: FAST

• Construction Year from: 12.2006
• Construction Year to: 12.2009
• Manufacturer: BOSCH

• Emission Standard: Euro 4 (D4)
• for OE number: 55198717, 4709270, 93187247, 18590 79J50
• Number of pins: 3
• Connector Shape: oval
• Fabrication Number: ECS-PL-001
• Manufacturer: NTY

• Exhaust System: before soot particulate filter
• Emission Standard: Euro 4 (D4)
• Number of pins: 3
• Pressure [Pa] from: 0
• Pressure [Pa] to: 120,000
• for OE number: 05035213AA
• Manufacturer: NRF

• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Connector Shape: oval
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Manufacturer: FAST

• Exhaust System: before soot particulate filter
• Emission Standard: Euro 5
• Number of pins: 3
• Pressure [Pa] from: 0
• Pressure [Pa] to: 90,000
• for OE number: 05146181AA
• Manufacturer: NRF

• Number of pins: 3
• for OE number: 08 62 715, 55198717, 93187247
• Manufacturer: TOPRAN

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Voltage [V]: 12
• Corresponds to the original part in colour: grey
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Colour Coding: blue
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009121331

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: before soot particulate filter
• Vehicle Equipment: for vehicles with diesel soot filter
• Number of pins: 3
• for OE number: 08 62 040, 1 563 425, 51792301
• Manufacturer: TOPRAN

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Length [mm]: 62.1
• Outer Diameter [mm]: 20.55
• Number of connectors: 3
• Weight [kg]: 0.03
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Emission Standard: Euro 4 (D4)
• for OE number: 55204765
• Overall Length [mm]: 735
• Number of pins: 2
• Fabrication Number: EGT-AR-006
• Cable Length [mm]: 580
• Manufacturer: NTY

• for OE number: 55198717
• Material: Plastic
• Number of connectors: 3
• Weight [kg]: 0.05
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV651
• Manufacturer: ESEN SKV

• Construction Year to: 11.2006
• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Pressure from [kPA]: 20
• Pressure to [kPA]: 300
• for OE number: 55206797, 6238865, 1611432480, EL8A-9F479-CA
• Manufacturer: MEAT&DORIA

• Construction Year from: 01.2009
• Emission Standard: Euro 4 (D4)
• Number of pins: 3
• Opening pressure [kPa]: 3
• Name: DE DPS00048-12B1
• Manufacturer: DELPHI

Manufacturer: FAST

• Length [mm]: 59
• Bore Ø [mm]: 7.4
• Number of connectors: 4
• Material: Plastic
• Weight [kg]: 0.027
• Supplementary Article/Info 2: with seal ring
• for OE number: 12 35 029
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Emission Standard: Euro 5
• Number of mounting bores: 1
• Number of circuits: 2
• Connector Shape: oval
• Number of pins: 3
• for OE number: 51 855 119
• Weight [kg]: 0.024
• Vehicle Equipment: for vehicles with diesel soot filter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: 199 A3.000
• Emission Standard: Euro 4 (D4)
• Exhaust System: before soot particulate filter
• for OE number: 08 62 715
• Connector Shape: oval
• Weight [kg]: 0.023
• Number of mounting bores: 1
• Vehicle Equipment: for vehicles with diesel soot filter
• Number of pins: 3
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: 199 A3.000
• Fitting Position: Intake Manifold
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.082
• Manufacturer: EPS

• Number of connectors: 3
• Colour: black
• Operating Mode: Electric
• Weight [kg]: 0.019
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 10.2007
• Housing Type: with housing
• Fabrication Number: EPP-AR-005
• Manufacturer: NTY

• Engine Code: 199 A3.000
• Emission Standard: Euro 4 (D4)
• Exhaust System: before soot particulate filter
• Pressure from [kPA]: 3
• Pressure to [kPA]: 121
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Name: EP 1.993.273
• Manufacturer: EPS

• Emission Standard: Euro 5
• Block Separation:
• Construction Year from: 07.2008
• Number of pins: 3
• Opening pressure [kPa]: 1
• Manufacturer: DELPHI
• Name: DE DPS00007

• Engine Code: 199 A3.000
• Emission Standard: Euro 5
• Exhaust System: before soot particulate filter
• Pressure from [kPA]: 0
• Pressure to [kPA]: 93
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Name: EP 1.993.292
• Manufacturer: EPS

• Number of connectors: 3
• Colour: black
• Operating Mode: Electric
• Weight [kg]: 0.019
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Name: SW 70 10 2325

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Housing Type: with housing
• Fabrication Number: EPP-AR-008
• Manufacturer: NTY

• Number of pins: 3
• Connector Shape: oval
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: 199 A3.000
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS10727-12B1

• Alternatively:
• Number of connectors: 3
• Alternative Repair Kit: 550732
• Manufacturer: ERA

• Housing Colour: black
• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 28
• for OE number: 55201876, 1247060
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Fitting Depth [mm]: 28
• Weight [kg]: 0.022
• Manufacturer: ERA

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 28
• Weight [kg]: 0.022
• Resistor [Ohm]: 850
• Rated Voltage [V]: 12
• Housing Diameter [mm]: 20.7
• Manufacturer: ERA

• Connector Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring, without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fuel Mixture Formation: Common Rail (CR)
• Fabrication Number: EFP-FT-004
• Name: NTY EFP-FT-004
• Manufacturer: NTY

• Number of connectors: 3
• Material: Plastic
• Weight [kg]: 0.02
• for OE number: 55198717
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Exhaust System: before soot particulate filter
• Emission Standard: Euro 5
• Vehicle type: Grande Punto
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP009409091
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Pressure [Pa] from: 20,000
• Pressure [Pa] to: 256,000
• Manufacturer: METZGER

• Number of pins: 3
• Housing Colour: grey
• Manufacturer: FAE

• Length [mm]: 62.1
• Outer Diameter [mm]: 20.55
• Number of connectors: 3
• Weight [kg]: 0.03
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 3
• Material: Plastic
• Weight [kg]: 0.02
• for OE number: 55198717
• Manufacturer: SWAG
• Name: SW 70 94 4337

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Emission Standard: Euro 4 (D4)
• Block Separation:
• Construction Year to: 12.2008
• Number of pins: 3
• Opening pressure [kPa]: 4
• Manufacturer: DELPHI

• for OE number: 55183650
• Manufacturer: KAMOKA

• Fuel Mixture Formation: Common Rail (CR)
• Number of pins: 3
• Supplementary Article/Info 2: High Pressure Side
• Weight [kg]: 0.07
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV619

• Fabrication Number: EFP-FT-005
• Manufacturer: NTY
• Name: NTY EFP-FT-005

• for OE number: 51782034
• Manufacturer: KAMOKA

• Length [mm]: 50.7
• Thread Size: M18x1,5 mm
• Pressure to [bar]: 1,800
• Number of pins: 3
• Weight [kg]: 0.07
• Warranty: 3 years warranty
• Temperature range from [°C]: -40
• Temperature range to [°C]: 125
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Engine Code: 199 A3.000
• Fitting Position: Intake Manifold
• Sensor Type: Inductive Sensor
• Number of pins: 4
• for OE number: 55 219 298
• Weight [kg]: 0.045
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 12.2009
• Manufacturer: BOSCH

• Emission Standard: Euro 5
• Fitting Position: after catalytic converter
• Connector Shape: oval
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 50
• Cable Length [mm]: 385
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: NRF

• Construction Year from: 11.2007
• Construction Year to: 12.2009
• Quality class: PJ
• Name: Air flow sensor

• Number of pins: 4
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Manufacturer: FAE

• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Fitting Depth [mm]: 22
• Manufacturer: ERA

• Voltage [V]: 12
• Cable Length [mm]: 580
• Number of pins: 2
• Warranty: 3 years warranty
• Weight [kg]: 0.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year to: 12.2009
• Manufacturer: BOSCH
• Name: BS 0281002770