• for OE number: 46750243
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 630
• Number of pins: 4
• Weight [g]: 122
• Gross Weight [g]: 155
• Manufacturer: DENSO

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
MAREA WEEKEND (185),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
MAREA WEEKEND (185),
(kvaliteediklass: Q)"

• Fabrication Number: ESS-FT-000
• Manufacturer: NTY

• for OE number: 71728656
• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Pressure from [kPA]: 17
• Pressure to [kPA]: 104
• Fabrication Number: ECT-FT-000
• Manufacturer: NTY
• Name: NTY ECT-FT-000

• Engine Code: 182 B6.000
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.830.233K, 1.880.115, 1.880.179, 1.880.180, 1.880.405, 1.880.411, 1.880.572, 1.880.580, 1.880.581, 1.880.582, 1.880.585, 1.880.639, 1.880.660, 1.880.669, 1.880.670, 1.880.673, 1.880.675

• Construction Year from: 01.2004
• Construction Year to: 01.2008
• Number of pins: 2
• Housing Colour: green
• Weight [kg]: 0.03
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 01.2004
• Construction Year to: 01.2008
• for OE number: 55 190 791
• Length [mm]: 62
• Thread Size: M12 x 1,5
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Weight [kg]: 0.03
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pressure from [kPA]: 20
• Pressure to [kPA]: 10
• Number of pins: 4
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Colour: black
• Number of pins: 4
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MAX

• Sensor Type: Hall Sensor
• Number of pins: 3
• Length [mm]: 405
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Number of pins: 4
• Name: OHUSURVEANDUR,
• Manufacturer: MAX

• Engine Code: 182 B6.000
• Sensor Type: Active sensor
• for OE number: 13 62 7 791 127
• Manufacturer: KAMOKA

• Number of pins: 3
• Weight [kg]: 0.08
• Cable Length [mm]: 350
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Fabrication Number: ECP-PL-041
• Number of pins: 3
• Manufacturer: NTY

• Thread Size: M12x1,5
• Spanner Size: 19
• Number of pins: 2
• Mounting Type: Screw Connection
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT013113091
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 4
• Weight [kg]: 0.03
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV107

• Required quantity: 1
• Manufacturer: BREMI

• Thread Size: M 12x1,5
• Number of pins: 2
• Housing Colour: green
• Sensor Type: NTC Sensor
• Manufacturer: FAE

• Number of pins: 2
• Name: DETONATSIOONIANDUR
• Manufacturer: MAX

• Length [mm]: 400
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: DLP

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Socket colour: white
• Manufacturer: BREMI

• Engine Code: 182 B6.000
• Length [mm]: 405
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Length [mm]: 400
• Alternatively:
• Number of pins: 3
• Housing Colour: white
• Weight [kg]: 0.048
• Alternative Repair Kit: 550094
• Resistor M[ohm]: 1.8
• Manufacturer: ERA

• Supplementary Article/Info 2: with cable
• Length [mm]: 430
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PG013114331

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Connector Shape: oval
• Manufacturer: ERA

• Number of pins: 2
• Manufacturer: FAST

• Alternatively:
• Number of pins: 4
• Weight [kg]: 0.028
• Alternative Repair Kit: 550125
• Manufacturer: ERA

• Number of pins: 3
• Connector Shape: rectangular
• Number of mounting bores: 2
• Sensor Type: Hall Sensor
• Fitting Depth [mm]: 20
• for OE number: 46481306
• Manufacturer: MEAT&DORIA

• Fitting Position: Intake Manifold
• Number of pins: 4
• Connector Shape: oval
• Sensor Type: NTC Sensor
• Manufacturer: TOPRAN

Supplementary Article/Info 2: with seal ring, with mounting parts, with integrated air temperature sensor General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Number of connectors: 2
• Weight [kg]: 0.04
• for OE number: 55190562
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 2
• Weight [kg]: 0.04
• for OE number: 55190562
• Name: DETONATSIOONIANDUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Pressure [Pa] from: 15,000
• Pressure [Pa] to: 105,000
• Voltage [V]: 5
• Number of pins: 4
• Number of mounting bores: 2
• Supplementary Article/Supplementary Info: with gaskets/seals
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP358152461
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 01.2008
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.03
• Manufacturer: VALEO
• Name: VA 253818

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE AS10170

• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Pressure from [kPA]: 17
• Pressure to [kPA]: 104
• for OE number: 71728656
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Cable Length [mm]: 400
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Thickness [mm]: 43.45
• Outer Diameter [mm]: 12.9
• Number of connectors: 4
• Weight [kg]: 0.025
• for OE number: 006 153 47 28
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 01.2008
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Weight [kg]: 0.06
• Manufacturer: VALEO

Manufacturer: FAST

• Number of pins: 4
• Pressure from [kPA]: 13
• Manufacturer: DELPHI
• Name: DE PS10226

• Engine Code: 182 B6.000
• Lambda Sensor: Regulating Probe
• Number of circuits: 4
• Supplementary Article/Info 2: without plug
• Manufacturer: ENERGY

• Engine Code: 182 B6.000
• Pressure from [kPA]: 17
• Pressure to [kPA]: 104
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: EPS

• Lambda Sensor: Diagnostic Probe, Lambda Sensor
• Engine Code: 182 B6.000
• Voltage [V]: 12
• Length [mm]: 610
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Number of connectors: 4
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with fastening material
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 12.2007
• Lambda Sensor: Regulating Probe, Diagnostic Probe, Heated
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

Fitting Position: before catalytic converter, after catalytic converter

• Lambda Sensor: Regulating Probe
• Engine Code: 182 B6.000
• Voltage [V]: 12
• Length [mm]: 410
• Number of circuits: 4
• Weight [kg]: 0.09
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV059

• Engine Code: 182 B6.000
• Number of pins: 4
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY

• Construction Year to: 12.2007
• Manufacturer: BOSCH

• Exhaust System: for pre-catalytic converter
• Block Separation:
• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 400
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Engine Code: 182 B6.000
• Fitting Position: before catalytic converter
• Cable Length [mm]: 450
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.240
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased

• Voltage [V]: 12
• Number of pins: 5
• Weight [kg]: 0.07
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 07SKV506
• Manufacturer: ESEN SKV

• Fitting Position: after catalytic converter
• Cable Length [mm]: 600
• Lambda Sensor: Planar probe, Heated
• Manufacturer: DELPHI
• Name: DE ES20345-12B1

• Length [mm]: 450
• Number of circuits: 4
• Conductor Number: 4
• Resistor [Ohm]: 9
• Cable Length [mm]: 450
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Engine Code: 182 B6.000
• Fitting Position: after catalytic converter
• Cable Length [mm]: 650
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.240
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Number of circuits: 4
• Conductor Number: 4
• Length [mm]: 630
• Resistor [Ohm]: 9
• Cable Length [mm]: 630
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Lambda Sensor: Diagnostic Probe, Heated
• Voltage [V]: 12
• Length [mm]: 650
• Number of circuits: 4
• Weight [kg]: 0.14
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV638
• Manufacturer: ESEN SKV

• Engine Code: 182 B6.000
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 4
• Pressure from [kPA]: 20
• Pressure to [kPA]: 100
• Manufacturer: FAE

• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 12.2007
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• for OE number: 46762182, 46751082
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 400
• Number of pins: 4
• Weight [g]: 113
• Gross Weight [g]: 146
• Manufacturer: DENSO
• Name: DN DOX-2006

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
IDEA, 12.03-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
IDEA, 12.03-
(kvaliteediklass: Q)"

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Construction Year to: 12.2007
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 430
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 01.2008
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 450
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.13
• Name: VA 368033
• Manufacturer: VALEO

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year to: 01.2008
• Engine Code: 182B6.000
• Supplementary Article/Info 2: for camshaft, without cable
• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 8.3
• Connector Shape: oval
• Resistor [kOhm]: 13.4
• Weight [kg]: 0.019
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 12.2007
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 630
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Length [mm]: 430
• Manufacturer: FAE

• Construction Year to: 01.2008
• Number of pins: 3
• Supplementary Article/Info 2: with cable
• Weight [kg]: 0.08
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Lambda Sensor: Regulating Probe, Planar probe
• Number of pins: 4
• Connector Shape: oval
• Cable Length [mm]: 510
• Manufacturer: MEAT&DORIA

• Construction Year to: 01.2008
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 650
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.14
• Manufacturer: VALEO

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year to: 12.2007
• Number of mounting bores: 4
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• for OE number: 51892665
• Manufacturer: MEAT&DORIA