• Vehicle Equipment: for vehicles with power steering
• Diameter [mm]: 10
• Filter type: In-Line Filter
• Supplementary Article/Info 2: Magnetic
• Lisainfo: Hydraulic Filter, steering system
• Additional information: Hydraulic Filter, steering system

• Engine Code: 127 A.000
• Spark Plug: 1 - Earthed Electrode, with resistor
• Electrode Gap [mm]: 0.9
• Thread Size: M14 x 1.25
• Thread Length [mm]: 19
• Spanner Size: 20,8
• Technical Information: Nichel-Chromium with internal in branch
• Manufacturer: MAGNETI MARELLI

• Construction Year from: 01.1982
• Required quantity: 4
• Electrode Gap [mm]: 0.8
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 20,8
• Spark Position [mm]: 3
• Number of pins: 1
• Name: SššTEKššNAL
• Manufacturer: BOS

• Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode
• Thread Length [mm]: 19
• Spanner Size: 20
• for OE number: 59622A
• Manufacturer: KAMOKA

• Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode
• Thread Length [mm]: 19
• Spanner Size: 20
• for OE number: 09482-00299
• Manufacturer: KAMOKA

• Engine Code: 127 A.000
• Required quantity: 4
• Electrode gap to be set [mm]: 0.7
• for OE number: 21013707001
• Connector type: Removable SAE
• Diameter [mm]: 14
• Spanner Size: 20.6
• Tightening Torque [Nm]: 22
• Weight [g]: 56
• Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
• Thread Length [mm]: 19
• Gross Weight [g]: 59
• Manufacturer: DENSO
• Name: DN W20EPRU

• Construction Year from: 01.1982
• Electrode Gap [mm]: 0.7
• Thread Size: M14 x 1,25
• Spanner Size: 21
• Spark Plug: 1 - Earthed Electrode
• Thread Length [mm]: 19
• Weight [kg]: 0.056
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Tightening Torque [Nm]: 25
• Electrode Gap [mm]: 0.8
• Thread Size: M14 x 1.25
• Spanner Size: 21
• Spark Plug: 1 - Earthed Electrode
• Thread Length [mm]: 19
• Assy./disassy. by qualified personnel required!:
• Name: HE 8EH188704021
• Manufacturer: HELLA

• Filter type: Spin-on Filter
• Length [mm]: 87.2
• Outer Diameter [mm]: 76.5
• Fitted Diameter [mm]: 71.4
• Internal Thread [mm]: 3/4 x 16
• Manufacturer: ASHIKA

• Filter type: Spin-on Filter
• Length [mm]: 87.2
• Outer Diameter [mm]: 76.5
• Fitted Diameter [mm]: 71.4
• Internal Thread [mm]: 3/4 x 16
• Manufacturer: JAPKO
• Lisainfo: 10279 JAPKO
• Additional information: 10279 JAPKO

• Engine Code: 127 A.000
• Electrode Gap [mm]: 0.7
• Diameter [mm]: 21
• Length [mm]: 73.5
• Weight [kg]: 0.052
• Thread Size: M14 x 1,25
• Spark Plug: 1 - Earthed Electrode
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Electrode Gap [mm]: 0.8
• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Name: SššTEKššNAL
• Manufacturer: NGK
• Additional information: V-LINE 2
• Lisainfo: V-LINE 2

Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat

• Filter type: Spin-on Filter
• Length [mm]: 87.2
• Outer Diameter [mm]: 76.5
• Fitted Diameter [mm]: 71.4
• Internal Thread [mm]: 3/4 x 16
• Name: OLIFILTER
• Manufacturer: JPA
• Additional information: FO-279S JP
• Lisainfo: FO-279S JP

• Construction Year from: 01.1982
• Electrode Gap [mm]: 0.7
• Length [mm]: 126
• Weight [kg]: 0.061
• Spark Plug: 1 - Earthed Electrode
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 4
• Electrode Gap [mm]: 0.9
• Connector type: M4/SAE
• Thread Size: M14x1.25
• Spanner Size: 21 mm
• Quality/ Grade: Nickel GE
• Packing Type: Box
• Thread Length [mm]: 19
• Technical Information Number: RN9YC
• Spark Position [mm]: 3
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 8.85
• Packaging width [cm]: 2.6
• Packaging height [cm]: 2.35
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 9
• Projection [mm]: 1.5
• Name: CH OE006/T10
• Manufacturer: CHAMPION

Spark Plug: 1 - Earthed Electrode, with gasket seat, Copper Centre Electrode

• Filter type: Spin-on Filter
• Height [mm]: 96
• Outer Diameter [mm]: 76
• Manufacturer: KAMOKA FILTRY

• Electrode Gap [mm]: 0.8
• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Name: SššTEKššNAL
• Manufacturer: NGK

Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat

• Electrode Gap [mm]: 0.8
• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Name: SššTEKššNAL
• Manufacturer: NGK

Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector

• Construction Year from: 01.1982
• Length [mm]: 1,000
• Width [mm]: 10
• Belts: Open-sided, Toothed
• Name: KIILRIHM
• Manufacturer: BOS

• Driven Units: Alternator
• Length [mm]: 1,000
• Width [mm]: 10
• Lisainfo: Fan belt for alternator, 10x1000 mm
• Additional information: Fan belt for alternator, 10x1000 mm

• Filter type: Spin-on Filter
• Height [mm]: 87
• Outer Diameter [mm]: 77
• Name: OLIFILTER
• Manufacturer: MAX

• Outer Diameter 1 [mm]: 76
• Inner Diameter 1 [mm]: 72
• Inner Diameter 2 [mm]: 63
• Thread Size: 3/4"-16 UNF
• Height [mm]: 103
• Filter type: Spin-on Filter
• Manufacturer: DENCKERMANN FILTRY

• Construction Year to: 12.1984
• Filter type: Filter Insert
• Height [mm]: 53
• Outer Diameter [mm]: 205
• Inner Diameter 1 [mm]: 155
• Diameter 4 [mm]: 171
• Diameter 3 [mm]: 155
• Net Weight [g]: 138
• Packaging length [cm]: 21.5
• Packaging height [cm]: 21.5
• Packaging width [cm]: 6
• Name: KN LX157
• Manufacturer: KNECHT

• Construction Year from: 04.1981
• Height [mm]: 97
• Thread Size: 3/4-16 UNF
• Outer Diameter [mm]: 75
• Outer Diameter 1 [mm]: 77
• Outer Diameter 2 [mm]: 71.5
• Inner Diameter 1 [mm]: 62
• Bypass Valve Opening Pressure [bar]: 1
• Supplementary Article/Info 2: with one anti-return valve
• Filter type: Spin-on Filter
• Manufacturer: SOFIMA

• Engine Code: 127 A.000
• Required quantity: 4
• Electrode gap to be set [mm]: 0.7
• Connector type: Crimped SAE
• Diameter [mm]: 14
• Spanner Size: 20.6
• Tightening Torque [Nm]: 22
• Weight [g]: 58
• Country Specific Design: Japan
• Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
• Thread Length [mm]: 19
• Gross Weight [g]: 61
• Manufacturer: DENSO
• Name: DN W20TT

Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Height [mm]: 100
• Thread Size: 3/4"-16 UNF
• Outer Diameter [mm]: 76
• Packing Type: Box
• Filter type: Spin-on Filter
• Version: w/ Anti-Drain valve, with By-Pass valve
• Bypass Valve Opening Pressure [bar]: 1.5
• Packaging length [cm]: 8
• Packaging width [cm]: 8
• Packaging height [cm]: 10.6
• Sealing Ring Diameter from [mm]: 62
• Sealing Ring Diameter up to [mm]: 71
• Name: CH COF100106S
• Manufacturer: CHAMPION

• Fitting Position: Centre, Front
• Length [mm]: 450
• Length [inch]: 18
• Wiper blade type: Bracket wiper blade
• Quantity: 1
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Name: HE 9XW178878181
• Manufacturer: HELLA
• Lisainfo: 9XW178878-181
• Additional information: 9XW178878-181

• Filter type: Main Stream Filtration, Spin-on Filter
• Diameter 1 [mm]: 77
• Thread Size: 3/4" - 16 UNF
• Height [mm]: 100
• Name: CL DO 238
• Manufacturer: CLEAN FILTERS

• Construction Year from: 10.1985
• Alternatively:
• Filter type: Spin-on Filter
• Height [mm]: 85
• Thread Size: UNF 3/4" -16
• Outer Diameter [mm]: 77
• Inner Diameter 1 [mm]: 71
• Inner Diameter 2 [mm]: 62
• Bypass Valve Opening Pressure [bar]: 1
• Weight [kg]: 0.282
• Manufacturer: VALEO
• Name: VA 586039

• Driven Units: Alternator
• Weight [kg]: 0.078
• Length [mm]: 1,000
• Name: KIILRIHM
• Manufacturer: CON

• Height [mm]: 79
• Thread Size: 3/4-16 UNF
• Outer Diameter [mm]: 76
• Filter type: Spin-on Filter
• Outer Diameter 2 [mm]: 71
• Inner Diameter 2 [mm]: 62
• Bypass Valve Opening Pressure [bar]: 1.5
• Manufacturer: DRIVE

• Construction Year from: 01.1985
• Filter type: Filter Insert
• Height [mm]: 55
• Inner Diameter [mm]: 182
• Outer Diameter [mm]: 232
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Fitting Position: Passenger Side
• Fastening Type: Hook fixing
• Length [mm]: 380
• Length [inch]: 15
• Weight [g]: 78
• Name: TR EF380
• Manufacturer: TRICO

• Driven Units: Alternator, Water Pump
• Trim Level: >00/87
• Width [mm]: 10
• Length [mm]: 1,000
• Manufacturer: DAYCO
• Name: DA A10 1000C

• Filter type: Spin-on Filter
• Height [mm]: 98
• Outer Diameter [mm]: 78.5
• Thread Size: 3/4-16UNF
• Name: OLIFILTER
• Manufacturer: ALC

• Required quantity: 4
• Alternatively:
• Electrode Gap [mm]: 0.9
• Connector type: M4/SAE
• Thread Size: M14x1.25
• Spanner Size: 21 mm
• Quality/ Grade: Ti Poly-V
• Packing Type: Box
• Spark Plug: 1 - Earthed Electrode, with gasket seat
• Thread Length [mm]: 19
• Technical Information Number: CET8
• Spark Position [mm]: 3
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 8.85
• Packaging width [cm]: 2.6
• Packaging height [cm]: 2.35
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Projection [mm]: 1.5
• Name: CH CET8
• Manufacturer: CHAMPION

• Construction Year from: 01.1982
• Fitting Position: Rear
• Length [mm]: 380
• Name: KLAASIPUHASTAJA KUMM
• Manufacturer: MAX

• Required quantity: 4
• Alternatively:
• Electrode Gap [mm]: 0.9
• Connector type: M4/SAE
• Thread Size: M14x1,25
• Spanner Size: 21 mm
• Quality/ Grade: Poly-V Tit
• Spark Plug: 1 - Earthed Electrode, with gasket seat
• Thread Length [mm]: 19
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Name: SššTEKššNAL
• Manufacturer: BERU

• Construction Year from: 10.1985
• Filter type: Spin-on Filter
• Height [mm]: 85
• Thread Size: UNF 3/4" -16
• Outer Diameter [mm]: 77
• Inner Diameter 1 [mm]: 71
• Inner Diameter 2 [mm]: 62
• Bypass Valve Opening Pressure [bar]: 1
• Weight [kg]: 0.282
• Manufacturer: VALEO
• Name: VA 586023

• Filter type: Spin-on Filter
• Height [mm]: 96.5
• Thread Size: 3/4-16 UNF
• Outer Diameter [mm]: 76.5
• Inner Diameter 1 [mm]: 71.5
• Inner Diameter 2 [mm]: 62.5
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Driven Units: Alternator
• Tensile Cord Material: Polyester
• Belt Material: Polychloroprene (Neoprene)
• Colour: black
• Width [mm]: 10
• Length [mm]: 1,000
• Outer Length [mm]: 1,010
• Manufacturer: GATES

• Filter type: Spin-on Filter
• Diameter [mm]: 76.4
• Height [mm]: 94
• Thread Size: 3/4"-16UNF-2B
• Diameter 2 [mm]: 71
• Seal Diameter [mm]: 62
• Tightening Torque [Nm]: 20
• Article number of the recommended special tool: OCS 1
• Supplementary Article/Info 2: with one anti-return valve
• Valve type: Overflow Valve
• Packaging height [cm]: 10
• Net Weight [g]: 318
• Packaging length [cm]: 8
• Packaging width [cm]: 8
• Manufacturer: KNECHT
• Name: KN OC501

• Construction Year from: 01.1982
• Filter type: Spin-on Filter
• Height [mm]: 79
• Thread Size: 3/4" 16 UNF
• Outer Diameter [mm]: 76
• Inner Diameter 2 [mm]: 62
• Outer Diameter 2 [mm]: 71
• Name: OLIFILTER
• Manufacturer: BOS

• Construction Year to: 12.1984
• Height [mm]: 50
• Inner Diameter [mm]: 156
• Outer Diameter [mm]: 203
• Packing Type: Box
• Filter type: Filter Insert
• Packaging length [cm]: 22.3
• Packaging width [cm]: 21.7
• Packaging height [cm]: 5.8
• Name: CH CAF100107R
• Manufacturer: CHAMPION

• Filter type: Spin-on Filter
• Outer Diameter [mm]: 75
• Seal Diameter [mm]: 71
• Thread Size: 3/4-16 UNF
• Height [mm]: 97
• Manufacturer: HENGST FILTER

• Construction Year from: 01.1982
• Fitting Position: Rear
• Length 1 [mm]: 370
• Wiper blade type: Bracket wiper blade
• Name: KLAASIPUHASTAJA KUMM
• Manufacturer: BOS

• Filter type: Spin-on Filter
• Height [mm]: 101
• Thread Size: UNF 3/4" -16
• Outer Diameter [mm]: 79
• Inner Diameter 1 [mm]: 69
• Inner Diameter 2 [mm]: 62
• Bypass Valve Opening Pressure [bar]: 1
• Weight [kg]: 0.29
• Name: VA 586053
• Manufacturer: VALEO

• Fitting Position: Passenger Side
• Matching Adapter: U-hook
• for OE number: 8250A186
• Length [mm]: 450
• Length [inch]: 18
• Weight [g]: 110
• Wiper blade type: Bracket wiper blade
• Gross Weight [g]: 146
• Manufacturer: DENSO
• Name: DN DM-045

• Construction Year from: 10.1985
• Fitting Position: Driver side, Passenger Side
• Wiper blade type: Bracket wiper blade
• Quantity: 1
• Length [mm]: 380
• Length [inch]: 15
• Adapter enclosed: A , R
• Technical Information: Product may differ from images
• Name: KLAASIPUHASTAJA KUMM
• Manufacturer: VAL

• Engine Code: 127 A.000
• Height [mm]: 96
• Filter type: Spin-on Filter
• Thread Size: UNF 3/4''-16
• Diameter 1 [mm]: 71
• Diameter 2 [mm]: 62
• Outer Diameter [mm]: 76
• Manufacturer: MAGNETI MARELLI

• ACEA specification: A3/B4, E7, E2
• API specification: CI-4/SL
• Capacity [litre]: 1
• SAE viscosity class: 15W-40
• Weight [kg]: 0.885
• Observe service information:
• Manufacturer: FEBI

Specification: Mack EO-M PLUS, Cummins CES 20076, Deutz DQC-III, CAT ECF-1-a/ECF-2, MTU Type 2, MB 229.1, MAN 3275, Renault RLD-2, VW 501 01/505 00, MB 228.3, VW 501 01, VW 505 00, Cummins CES 20077, Cummins CES 20078, DTFR 15B110 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Spin-on Filter
• Article number of the recommended special tool: LS 7
• Gasket inner diameter: 62
• Seal Ring Outer Diameter: 71
• Height [mm]: 79
• Thread Size: 3/4-16 UNF
• Outer Diameter [mm]: 76
• Supplementary Article/Info 2: with one anti-return valve
• Bypass Valve Opening Pressure [bar]: 1.5
• SVHC: No SVHC present!
• Name: OLIFILTER
• Manufacturer: MAN

• ACEA specification: E7, A3/B4
• API specification: CI-4/SL
• Capacity [litre]: 1
• SAE viscosity class: 20W-50
• Weight [kg]: 0.885
• Observe service information:
• Manufacturer: FEBI

Specification: MAN 3275, MB 229.1, MB 228.3, Volvo VDS-3, Allison C, CAT ECF-1-a/ECF-2, Cummins CES 20071, Deutz DQC III-05, Mack EO-M PLUS, MTU Type 2, Renault RLD-2, Cummins CES 20072, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 15B110 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter [mm]: 23
• Outer Diameter [mm]: 47
• Manufacturer: FAST

• Fitting Position: Driver side, Front
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Matching Adapter: A
• Wiper blade type: Flat wiper blade
• Styling: with spoiler
• Quantity Unit: Piece
• Length [mm]: 450
• Length [inch]: 18
• Similar to picture:
• Manufacturer: CONTINENTAL WYCIERACZKI
• Additional information: 2800011304280 CONTI
• Lisainfo: 2800011304280 CONTI

• Engine Code: 127 A.000
• Required quantity: 4
• Fuel Type: CNG/LPG
• Electrode gap to be set [mm]: 0.7
• Connector type: Solid SAE
• Diameter [mm]: 14
• Spanner Size: 20.6
• Tightening Torque [Nm]: 22
• Weight [g]: 58
• Country Specific Design: Japan
• Spark Plug: 1 - Earthed Electrode, Platinum Middle Electrode
• Thread Length [mm]: 19
• Gross Weight [g]: 61
• Manufacturer: DENSO
• Name: DN IW20TT
• Quality class: Q

Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Fitting Position: Passenger Side
• Matching Adapter: U-hook
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• not for country specific design: Great Britain
• for OE number: 76630TM8A01
• Length [mm]: 450
• Length [inch]: 18
• Weight [g]: 142
• Wiper blade type: Hybrid Wiper Blade
• Gross Weight [g]: 177
• Manufacturer: DENSO
• Additional information: DUR-045L DEN
• Lisainfo: DUR-045L DEN

• Fitting Position: Passenger Side
• Matching Adapter: U-hook
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Country Specific Design: Great Britain
• for OE number: 76632TM8A21
• Length [mm]: 450
• Length [inch]: 18
• Weight [g]: 142
• Wiper blade type: Hybrid Wiper Blade
• Gross Weight [g]: 177
• Manufacturer: DENSO

• Electrode Gap [mm]: 0.8
• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Name: SššTEKššNAL
• Manufacturer: NGK

Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat

• Required quantity: 4
• Alternatively:
• Electrode Gap [mm]: 0.8
• Connector type: SAE
• Thread Size: M14x1.25
• Spanner Size: 21 mm
• Quality/ Grade: Pt GE
• Packing Type: Box
• Thread Length [mm]: 19
• Technical Information Number: RN8WYPB3
• Spark Position [mm]: 3
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 10
• Packaging width [cm]: 2.5
• Packaging height [cm]: 2.5
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Projection [mm]: 1.5
• Name: CH CCH9804
• Manufacturer: CHAMPION

Spark Plug: 1 - Earthed Electrode, with gasket seat, Iridium Middle Electrode

• Electrode Gap [mm]: 0.8
• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Fuel Type: CNG/LPG
• Recommended change interval [km]: 60,000
• Name: SššTEKššNAL
• Manufacturer: NGK
• Lisainfo: LPG2
• Additional information: LPG2

Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode

• ACEA specification: A3/B4, E7, E2
• API specification: CI-4/SL
• Capacity [litre]: 5
• SAE viscosity class: 15W-40
• Weight [kg]: 4.425
• Observe service information:
• Manufacturer: FEBI BILSTEIN

Specification: Mack EO-M PLUS, Cummins CES 20076, Deutz DQC-III, CAT ECF-1-a/ECF-2, MTU Type 2, MB 229.1, MAN 3275, Renault RLD-2, VW 501 01/505 00, MB 228.3, VW 501 01, VW 505 00, Cummins CES 20077, Cummins CES 20078, DTFR 15B110 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• ACEA specification: E7, A3/B4
• API specification: CI-4/SL
• Capacity [litre]: 5
• SAE viscosity class: 20W-50
• Weight [kg]: 4.425
• Observe service information:
• Manufacturer: FEBI

Specification: MAN 3275, MB 229.1, MB 228.3, Volvo VDS-3, Allison C, CAT ECF-1-a/ECF-2, Cummins CES 20071, Deutz DQC III-05, Mack EO-M PLUS, MTU Type 2, Renault RLD-2, Cummins CES 20072, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 15B110 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.