• Switch Pressure [bar]: 0.3
• Housing Colour: black
• Number of pins: 1
• Lisainfo: Oil Pressure Switch
• Additional information: Oil Pressure Switch

• for OE number: 46552313
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 980
• Number of pins: 4
• Weight [g]: 119
• Gross Weight [g]: 149
• Manufacturer: DENSO

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
BRAVO I (182), 10.95
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
BRAVO I (182), 10.95
(kvaliteediklass: Q)"

• Exhaust System: for pre-catalytic converter
• for OE number: 46774531
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 610
• Number of pins: 4
• Weight [g]: 100
• Gross Weight [g]: 130
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
PALIO WEEKEND (178DX
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
PALIO WEEKEND (178DX
(kvaliteediklass: Q)"

• Thread Size: M 14
• Thread Pitch [mm]: 1.5
• Number of pins: 1
• Operating Mode: Hydraulic
• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN
• Lisainfo: 206 957 HP
• Additional information: 206 957 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: 182 B6.000
• Colour: black
• Pressure to [bar]: 0.6
• Pressure from [bar]: 0.3
• Pressure [bar]: 0
• Thread Size: M14x1,5
• Spanner Size: 21
• Name: EP 1.800.096
• Manufacturer: EPS

• Switch Pressure [bar]: 0.5
• Thread Size: M14x1.5
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET

• Pressure [bar]: 5
• Housing Colour: black
• Thread Size: M14x1.5-6g
• Diameter [mm]: 21
• Spanner Size: 21
• Number of pins: 1
• Manufacturer: DELPHI
• Name: DE SW90000
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Thread Size: M 14x1,5
• Housing Colour: black
• Manufacturer: FAE
• Additional information: 12430 FAE
• Lisainfo: 12430 FAE

• Pressure from [bar]: 0.2
• Pressure to [bar]: 0.5
• Thread Size: M14x1,50
• Spanner Size: 21
• Manufacturer: MAGNETI MARELLI
• Name: MM SAA101

• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.04
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Name: SW 70 23 0001

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN
• Additional information: FE12228
• Lisainfo: FE12228

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 182 B6.000
• Braking/Drive Dynamics: for vehicles without ESP
• Spanner Size: 14
• Adjustment: with automatic adjustment
• Operating Mode: Mechanical
• Name: EP 1.810.108
• Manufacturer: EPS

• Engine Code: 182 B6.000
• Thread Size: M14 x 1,5
• Spanner Size: 21
• Number of pins: 1
• Pressure [bar]: 0.3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Housing Colour: black
• Number of pins: 4
• Thread Size: M12
• Spanner Size: 21
• Manufacturer: DELPHI
• Name: DE TS10401

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 4
• Socket colour: black
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 46753479
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Spanner Size: 21 mm
• Number of pins: 4
• Connecting thread: M12 x 1,5
• Manufacturer: ERA

• Engine Code: 182 B6.000
• Colour Coding: black
• Thread Size: M12x1,5
• Spanner Size: 21
• Name: EP 1.830.286
• Manufacturer: EPS

for article number: 1.830.286K, 1.880.115, 1.880.118, 1.880.122, 1.880.149, 1.880.189, 1.880.469, 1.880.563, 1.880.564, 1.880.565, 1.880.566, 1.880.567, 1.880.571, 1.880.573, 1.880.583, 1.880.676

• Number of pins: 3
• Socket colour: black
• Connector Shape: rectangular
• Supplementary Article/Info 2: with cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Length [mm]: 405
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Voltage [V]: 12
• Length [mm]: 715
• Number of pins: 3
• Weight [kg]: 0.11
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 17SKV291
• Manufacturer: ESEN SKV

• Cable Length [mm]: 590
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11092

• Voltage [V]: 12
• Resistor [Ohm]: 1,350
• Tolerance [%]: 10
• Cable Length [mm]: 720
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009146431

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• External Thread Size: M12 x 1,5
• Number of connectors: 4
• Weight [kg]: 0.03
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 400
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11203

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Socket colour: white
• Manufacturer: BREMI

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Length [mm]: 400
• Alternatively:
• Number of pins: 3
• Housing Colour: white
• Weight [kg]: 0.048
• Alternative Repair Kit: 550094
• Resistor M[ohm]: 1.8
• Manufacturer: ERA

• Supplementary Article/Info 2: with cable
• Length [mm]: 430
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PG013114331

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 06.2004
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 1,350
• Weight [kg]: 0.1
• Manufacturer: VALEO

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Connector Shape: oval
• Manufacturer: ERA

• Lambda Sensor: Lambda Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001

• not for emission standard: Euro 4 (D4)
• Number of connectors: 3
• Cable Length [mm]: 660
• Weight [kg]: 0.07
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 2
• Weight [kg]: 0.04
• for OE number: 55190562
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Name: NTY ESL-SK-000
• Manufacturer: NTY

• Number of connectors: 2
• Weight [kg]: 0.04
• for OE number: 55190562
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE AS10170

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.12
• Warranty: 3 years warranty
• Name: CE 09SKV121
• Manufacturer: ESEN SKV

• Resistor [Ohm]: 6
• Conductor Number: 4
• Length [mm]: 700
• Number of circuits: 4
• Cable Length [mm]: 700
• Lambda Sensor: Heated
• Name: MM OSM044
• Manufacturer: MAGNETI MARELLI

• Construction Year from: 06.2002
• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV098
• Manufacturer: ESEN SKV

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Construction Year to: 08.2005
• Engine Code: 182 B6.000
• Voltage [V]: 12
• Length [mm]: 610
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV054
• Manufacturer: ESEN SKV

• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Weight [kg]: 0.12
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV095
• Manufacturer: ESEN SKV

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 630
• Manufacturer: DELPHI
• Name: DE ES20267-12B1

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 95
• Gross Weight [g]: 139
• Manufacturer: DENSO
• Name: DN DOX-0121

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
MONDEO I SEDAN (GBP)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
MONDEO I SEDAN (GBP)
(kvaliteediklass: Q)"

• Exhaust System: for pre-catalytic converter
• Cable Length [mm]: 450
• Lambda Sensor: Planar probe, Heated
• Manufacturer: DELPHI
• Name: DE ES20311-12B1
• Quality class: PJ

Additional information: "Tootja: DELPHI
MEGANE II (BM0/1/, C
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
MEGANE II (BM0/1/, C
(kvaliteediklass: PJ)"

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986507

• Construction Year to: 08.2005
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 630
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV594
• Manufacturer: ESEN SKV

• Engine Code: 182 B6.000
• Required quantity: 1
• Length [mm]: 405
• Name: EP 1.953.213
• Manufacturer: EPS