• Number of pins: 1
• Thread Size: M16x1,5
• Spanner Size: 19 mm
• for OE number: 60813687
• Manufacturer: KAMOKA

• Engine Code: 159 A4.046
• Thread Size: M16x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Engine Code: 159 A4.046, 835C2000
• Block Separation:
• Engine Number from: 1513719
• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Number of pins: 1
• Spanner Size: 19
• Thread Size: 3/8
• for OE number: 04067872
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Construction Year from: 04.1992
• Thread Size: M16x1.5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Thread Size: M16 x 1,5
• Number of pins: 1
• Manufacturer: ERA

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 21
• Thread Size: M12x1.5
• for OE number: 46477022
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Colour Coding: blue
• Weight [kg]: 0.035
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 75
• Width [mm]: 50
• Height [mm]: 75
• Rotation Direction: Anticlockwise rotation
• Number of pins: 3
• Connector Shape: oval
• Fabrication Number: ECP-FT-006
• Manufacturer: NTY

• Engine Code: 159 A4.046
• Thread Size: M16x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.880.099, 1.880.116, 1.880.141, 1.880.142, 1.880.156, 1.880.170, 1.880.193

• Thread Size: M16x1,50
• Spanner Size: 19
• Manufacturer: MAGNETI MARELLI
• Name: MM SPA101

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 195321101000
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Thread Size: M 16x1,5 con.
• Manufacturer: FAE

• Engine Code: 159 A4.046
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.880.100, 1.880.108, 1.880.141, 1.880.152, 1.880.153, 1.880.193

• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Manufacturer: ERA

• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: ERA

• Voltage [V]: 12
• Fabrication Number: ECM-FT-001
• Lisainfo: FIAT MAREA WEEKEND 1.6 99-, PALIO 1.2 98-
• Additional information: FIAT MAREA WEEKEND 1.6 99-, PALIO 1.2 98-

• Thread Size: M14x1.5
• Manufacturer: VERNET

• Engine Code: 159A4046
• Resistor [Ohm]: 2,053, 238
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: M16x1,5
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 1
• Housing Colour: red
• Mounting Type: Vertical Screw Fitting
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PT009107151
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• Manufacturer: ERA

Manufacturer: DELLO AUTOMEGA

• Voltage [V]: 12
• Weight [kg]: 0.03
• Operating Mode: Electric
• Number of pins: 3
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV010

• Fitting Position: outer, inner
• for OE number: 40555010
• New Part:

• Thread Size: M 18x1,5 con.
• Number of pins: 2
• Housing Colour: light blue
• Manufacturer: FAE

• Number of pins: 3
• Connector Shape: rectangular
• Number of mounting bores: 3
• Colour: black
• for OE number: 1563 J4
• Manufacturer: DELLO AUTOMEGA

• Construction Year from: 01.1993
• Supplementary Article/Supplementary Info: with seal
• Voltage [V]: 12
• Resistor [Ohm]: 2,055, 327
• Number of pins: 2
• Housing Colour: blue
• Thread Size: M12x1,5
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Temperature range [°C]: 25, 80
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009309291
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 7439-92-1; Lead, 1303-86-2; Diboron trioxide Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: 159 A4.046
• Pressure from [kPA]: 17
• Pressure to [kPA]: 105
• Transmission Type: Manual Transmission
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MAX

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.05
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV100

• Engine Code: 159 A4.046
• Number of pins: 2
• Thread Size: M14x1,5
• Manufacturer: FAE

• Engine Code: 159 A4.046
• Thread Size: M14x1,5
• Spanner Size: 19
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Required quantity: 1
• Manufacturer: BREMI

• Cable Length [mm]: 390
• Number of pins: 3
• Weight [kg]: 0.08
• Warranty: 3 years warranty
• Name: CE 17SKV536
• Manufacturer: ESEN SKV

• Number of connectors: 3
• Manufacturer: VERNET

• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: BOS

• Pressure from [kPA]: 17
• Pressure to [kPA]: 105
• Manufacturer: FAST

• Colour: black
• Cable Length [mm]: 450
• Number of pins: 2
• Weight [kg]: 0.052
• Resistor [Ohm]: 700
• Fitting Depth [mm]: 29.5
• Manufacturer: ERA

• Number of circuits: 3
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle
• Manufacturer: SNR /NTN-SNR/

• Fitting Position: Front Axle
• Manufacturer: SNR /NTN-SNR/

• Length [mm]: 76.5
• Width [mm]: 65
• Height [mm]: 30
• Weight [kg]: 0.03, 0.061
• Colour: black
• Number of pins: 3
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: 159 A4.046
• Number of pins: 3
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY

• Pressure [Pa] from: 15,000
• Pressure [Pa] to: 105,000
• Voltage [V]: 5
• Number of pins: 3
• Number of mounting bores: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP358152451
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: 159 A4.046
• Pressure from [kPA]: 17
• Pressure to [kPA]: 105
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: EPS

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• for OE number: 078 906 265
• Lambda Sensor: Heated
• Name: Lambda andur
• Manufacturer: TRU

• Construction Year from: 01.1993
• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: PIERBURG

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Engine Code: 159 A4.046
• Cable Length [mm]: 750
• Manufacturer: FAE

• Pressure [Pa] from: 17,000
• Pressure [Pa] to: 105,000
• Manufacturer: METZGER

• Construction Year to: 03.1993
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 710
• Number of circuits: 3
• Weight [kg]: 0.16
• Resistor [Ohm]: 4.5
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV547

• Engine Code: 159 A4.046
• Name: EP 1.995.083
• Manufacturer: EPS

• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Engine Code: 159 A4.046
• Engine Number to: 1509143
• Cable Length [mm]: 1
• Manufacturer: DELPHI

• Length [mm]: 1,215
• Number of circuits: 3
• Resistor [Ohm]: 4.5
• Conductor Number: 3
• Cable Length [mm]: 1,215
• Lambda Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM078

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 1,250
• Number of circuits: 3
• Manufacturer: ERA

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Construction Year to: 03.1993
• Voltage [V]: 12
• Length [mm]: 670
• Number of circuits: 3
• Weight [kg]: 0.11
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV063
• Manufacturer: ESEN SKV

• Number of circuits: 3
• Overall Length [mm]: 1,236
• Lambda Sensor: Heated
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Construction Year to: 03.1993
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 1,670
• Number of circuits: 3
• Weight [kg]: 0.23
• Resistor [Ohm]: 4.5
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV546

• Lambda Sensor: Regulating Probe
• Construction Year from: 04.1993
• Voltage [V]: 12
• Length [mm]: 880
• Number of circuits: 4
• Weight [kg]: 0.13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV022
• Manufacturer: ESEN SKV

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 100
• Gross Weight [g]: 149
• Manufacturer: DENSO
• Name: DN DOX-0120

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe
• Construction Year to: 03.1993
• Voltage [V]: 12
• Length [mm]: 1,215
• Number of circuits: 3
• Weight [kg]: 0.13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV066
• Manufacturer: ESEN SKV

• Construction Year from: 04.1993
• Engine Code: 159 A4.046
• Manufacturer Restriction: Weber
• Injection System: Multi Point Injection (MPI)
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PP009400211
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: 159 A4.046
• Construction Year to: 03.1993
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Block Separation:
• Construction Year from: 04.1993
• Engine Number to: 1509143
• Number of circuits: 3
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS