• Length [mm]: 50
• Housing Colour: blue
• Spanner Size: 19
• Manufacturer: KAMOKA

• Number of pins: 1
• Thread Size: M16x1,5
• Spanner Size: 19 mm
• for OE number: 60813687
• Manufacturer: KAMOKA

Manufacturer: FAST

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Number of pins: 1
• Spanner Size: 19
• Thread Size: 3/8
• for OE number: 04067872
• Manufacturer: NRF

• Engine Code: 182 A3.000
• Housing Colour: red
• Thread Size: M16x1,5
• Spanner Size: 19
• Name: EP 1.830.000
• Manufacturer: EPS

for article number: 1.880.099, 1.880.116, 1.880.141, 1.880.142, 1.880.156, 1.880.170, 1.880.193

• Thread Size: M16x1,50
• Spanner Size: 19
• Name: MM SPA101
• Manufacturer: MAGNETI MARELLI

• Connector Shape: rectangular
• Colour Coding: blue
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Number of pins: 2
• Switch Point [°C]: 140
• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• OE-numbri jaoks: 13 62 1 709 967
• Laius (mm): 45
• Kõrgus (mm): 40
• Pikkus (mm): 75
• Kaal (g): 25
• Garantii: 3 aastat garantii
• Pistikkontaktide arv: 2
• Manufacturer: AT AUTOTEILE GERMANY

Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Sensor Type: Inductive Sensor
• Number of pins: 3
• Cable Length [mm]: 420
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 2
• Colour: blue
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Spanner Size: 19
• Thread Size: 16x1.5
• Number of pins: 1
• Supplementary Article/Info 2: without seal ring
• Weight [kg]: 0.05
• Name: VA 700002
• Manufacturer: VALEO

• OE-numbri jaoks: 60 813 687
• Laius (mm): 33
• Kõrgus (mm): 30
• Pikkus (mm): 58
• Kaal (g): 54
• Garantii: 3 aastat garantii
• Manufacturer: AT AUTOTEILE GERMANY

Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Engine Code: 182 A3.000
• Number of pins: 2
• Height [mm]: 51.8
• Weight [kg]: 0.029
• Supplementary Article/Info 2: with seal ring
• Thread Size: M12x1,5
• Housing Colour: blue
• Spanner Size: 19
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Tightening torque to [Nm]: 22
• Sensor Type: NTC Sensor
• Thread Size: M12x1,5
• Spanner Size: 19
• Colour Coding: blue
• Name: MM SPA104
• Manufacturer: MAGNETI MARELLI

• Engine Code: 182 A3.000
• Colour Coding: blue
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 1.880.113, 1.880.114, 1.880.149, 1.880.151
• Name: EP 1.830.128
• Manufacturer: EPS

• Colour: blue
• Housing Colour: blue
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Name: DE TS10250
• Manufacturer: DELPHI

• Length [mm]: 51
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 11
• Spanner Size: 19
• Number of connectors: 2
• Colour: blue
• Colour Coding: blue
• Switch Point [°C]: 20
• Weight [kg]: 0.022
• Supplementary Article/Info 2: with seal ring
• Name: SW 40 91 7695
• Manufacturer: SWAG
• Lisainfo: 40 91 7695 SWA
• Additional information: 40 91 7695 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Resistor [Ohm]: 2,053, 238
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: M16x1,5
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 1
• Housing Colour: red
• Mounting Type: Vertical Screw Fitting
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PT009107151
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: 182 A3.000
• Mounting Type: Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 2,080, 302
• Supplementary Article/Supplementary Info: with gasket/seal
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: M12x1,5
• Colour: blue
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: blue
• Manufacturer Restriction: Bosch
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009107361
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Voltage [V]: 12
• Length [mm]: 365
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV214
• Manufacturer: ESEN SKV

• Manufacturer: BOSCH
• Name: BS 0280130026

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-FT-000

• Mounting Type: Bolted
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Number of mounting bores: 1
• Length [mm]: 440
• Supplementary Article/Info 2: with cable
• Supplementary Article/Supplementary Info: with gaskets/seals
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU358191141
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Cable Length [mm]: 419
• Number of pins: 3
• Name: DE SS10962
• Manufacturer: DELPHI

• Voltage [V]: 12
• Number of pins: 3
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: with cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Length [mm]: 393
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PG013114451
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front Axle
• Overall Length [mm]: 1,220
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 1,100
• paired article number: 30083
• Weight [kg]: 0.1
• Manufacturer: A.B.S.

• Cable Length [mm]: 300
• Number of pins: 3
• Name: DE AS10175
• Manufacturer: DELPHI

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Name: NTY ESL-SK-000
• Manufacturer: NTY

• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Connector/Clamp: Connector may need adjustment
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-UV-000

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Oxygen Sensor: Regulating Probe
• Manufacturer: ASHIKA
• Lisainfo: 43-U04
• Additional information: 43-U04

• Number of pins: 2
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.09
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV755
• Manufacturer: ESEN SKV

• Engine Code: 182 A3.000
• Number of pins: 3
• Manufacturer: FAE

• Oxygen Sensor: Regulating Probe, Planar probe, Heated
• Vehicle Identification Number (VIN) from: 4029960
• Engine Code: 182 A3.000
• Block Separation:
• Fitting Position: before catalytic converter
• Cable Length [mm]: 385
• Name: DE ES20236-12B1
• Manufacturer: DELPHI
• Quality class: PJ

Additional information: "Tootja: DELPHI
SEICENTO (187), 01.9
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
SEICENTO (187), 01.9
(kvaliteediklass: PJ)"

Manufacturer: BOSCH

• Resistor [Ohm]: 3.5
• Number of circuits: 4
• Length [mm]: 400
• Conductor Number: 4
• Cable Length [mm]: 400
• Oxygen Sensor: Heated
• Name: MM OSM130
• Manufacturer: MAGNETI MARELLI

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 100
• Gross Weight [g]: 149
• Name: DN DOX-0120
• Manufacturer: DENSO
• Quality class: Q

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor Additional information: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)"

• Oxygen Sensor: Regulating Probe
• Engine Code: 182 A3.000
• Voltage [V]: 12
• Length [mm]: 410
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.09
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV059
• Manufacturer: ESEN SKV

• Oxygen Sensor: Oxygen Sensor
• Length [mm]: 972
• Number of circuits: 4
• Manufacturer: FAST

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• RICAMBI no. up to: 4029959
• Block Separation:
• RICAMBI Number from: 4029960
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986506

• for OE number: 46449401, 46455802
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 375
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 123
• Manufacturer: DENSO

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor Additional information: "Tootja: DENSO
BRAVO I (182), 10.95
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
BRAVO I (182), 10.95
(kvaliteediklass: Q)"

• Oxygen Sensor: Regulating Probe, Finger probe, Heated
• for RPO number from: 4029960
• Cable Length [mm]: 317
• Manufacturer: DELPHI

• Vehicle Identification Number (VIN) from: 4029960
• Transmission Type: Manual Transmission
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 300
• Number of circuits: 4
• Manufacturer: VDO

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 195321101000
• Supplementary Article/Info 2: with seal ring