• Length [mm]: 275
• Fabrication Number: ESL-TY-008
• Manufacturer: NTY

Fitting Position: Front, Left Front, before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased

• Engine Code: K3-VE
• Pressure [bar]: 0.4
• Thread Size: 1/8 GAS
• Number of pins: 1
• Manufacturer: KAVO

• Housing Colour: white
• Spanner Size: 19
• Manufacturer: KAMOKA

• Fabrication Number: ECT-TY-001
• Number of pins: 2
• Thread Size: M12x1,5
• Connector Shape: oval
• Socket colour: white
• Sensor Type: NTC Sensor
• Spanner Size: 19
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NTY
• Name: NTY ECT-TY-001

• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: JPN

Manufacturer: OYODO

• Switch Pressure [bar]: 0.3
• Thread Size: 1/8x28 BSPT
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET

• Engine Code: K3-VE
• Pressure [bar]: 0.4
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Manufacturer: FACET

• Engine Code: K3-VE
• Pressure [bar]: 0.4
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Name: EP 1.800.016
• Manufacturer: EPS

• Pressure [bar]: 1.5
• Housing Colour: black
• Thread Size: R1/8
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: DELPHI

• Thread Size: 1/8x28 BSP
• Pressure [bar]: 0.3
• Colour: black
• Manufacturer: FAE

• Engine Code: K3-VE
• Number of pins: 2
• Manufacturer: KAVO

• Fabrication Number: ECP-TY-003
• Manufacturer: NTY

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: white
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 1920KP
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Engine Code: K3-VE
• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: FACET

• Fabrication Number: ECP-TY-006
• Manufacturer: NTY

• Connector Shape: rectangular
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S19
• Thread Size: M12*1,5
• Name: NI 207098
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Engine Code: K3-VE
• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: EPS

• Housing Colour: white
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Name: DE TS10289
• Manufacturer: DELPHI

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Thread Size: M12 x 1,5
• Number of pins: 2
• Manufacturer: ERA

• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Weight [kg]: 0.03
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Manufacturer: FAE
• Additional information: 33235 NRF
• Lisainfo: 33235 NRF

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE SS10938
• Additional information: DELSS10938
• Lisainfo: DELSS10938

• Fabrication Number: ESS-TY-001
• Manufacturer: NTY

• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Engine Code: K3-VE
• Supplementary Article/Info 2: without fastening clamp
• Manufacturer: FACET

• Construction Year from: 01.2006
• Manufacturer: BOSCH

• Engine Code: K3-VE
• Supplementary Article/Info 2: without fastening clamp
• Name: EP 1.994.010
• Manufacturer: EPS

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY

• Height [mm]: 30.3
• Resistor [Ohm]: 2,100
• Number of connectors: 2
• Manufacturer: VERNET

Manufacturer: MAGNETI MARELLI

• Cable Length [mm]: 400
• Lambda Sensor: Heated, Thread pre-greased
• Number of circuits: 4
• Fabrication Number: ESL-DA-001
• Manufacturer: NTY

• Engine Code: K3-VE
• Manufacturer: FACET

• Number of pins: 2
• Manufacturer: JPN

• Fitting Position: Front, after catalytic converter
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SB-017
• Manufacturer: NTY

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Engine Code: K3-VE
• Name: EP 1.953.716
• Manufacturer: EPS

• Number of connectors: 2
• Manufacturer: JPN

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU013122001
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: K3-VE
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 30
• Alternative Repair Kit: 550440
• Manufacturer: ERA

• Number of pins: 2
• Connector Shape: oval
• Manufacturer: METZGER

• Required quantity: 1
• Resistor [Ohm]: 2,100
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Number of connectors: 2
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 30
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Connector Shape: round
• Number of mounting bores: 1
• Weight [kg]: 0.2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 30
• Alternative Repair Kit: 550850
• Resistor [kOhm]: 2.1
• Manufacturer: ERA

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 420
• Number of pins: 4
• Manufacturer: ERA

• Construction Year from: 01.2006
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 147
• Manufacturer: DENSO
• Lisainfo: DOX-0109 DENSO
• Additional information: DOX-0109 DENSO

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Lambda Sensor

• Construction Year from: 01.2006
• Manufacturer: BOSCH

• Engine Code: K3-VE
• Number of pins: 2
• Manufacturer: FAE ELEKTRYKA

• Lambda Sensor: Diagnostic Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 410
• Weight [kg]: 0.092
• Name: SW 33 10 6784
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 01.2006
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 95
• Gross Weight [g]: 144
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
SPACE WAGON (N5/W),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
SPACE WAGON (N5/W),
(kvaliteediklass: Q)"

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 2,250
• Manufacturer: VALEO
• Name: VA 253842

• Construction Year to: 02.2009
• Lambda Sensor: Diagnostic Probe, Finger probe, Thread pre-greased
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 570
• Number of pins: 4
• Weight [kg]: 0.174
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: K3-VE
• Manufacturer: FACET
• Name: EP 1.953.477

• Height [mm]: 30
• Resistor [Ohm]: 2,200
• Number of connectors: 2
• Manufacturer: VERNET

• Construction Year from: 01.2006
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986602

• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 02.2009
• Lambda Sensor: Diagnostic Probe, Finger probe, Thread pre-greased
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 350
• Number of pins: 4
• Weight [kg]: 0.174
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 01.2006
• for OE number: 89465-B4020, 8946505100
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 360
• Number of pins: 4
• Weight [g]: 94
• Gross Weight [g]: 127
• Manufacturer: DENSO
• Name: DN DOX-0204
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
CARINA E SEDAN (/T19
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
CARINA E SEDAN (/T19
(kvaliteediklass: Q)"

• Lambda Sensor: Diagnostic Probe, Lambda Sensor
• Exhaust System: after catalytic converter
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Weight [kg]: 0.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV113
• Manufacturer: ESEN SKV

• Lambda Sensor: Diagnostic Probe, Lambda Sensor
• Exhaust System: after catalytic converter
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Sensor Type: Inductive Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring