• Construction Year to: 12.2001
• Exhaust System: for pre-catalytic converter
• for OE number: 8946535580
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 250
• Number of pins: 4
• Weight [g]: 88
• Gross Weight [g]: 121
• Manufacturer: DENSO
• Name: DN DOX-0236

Lambda Sensor: Regulating Probe, Heated, Finger probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
SIRION (M1), 04.98-0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
SIRION (M1), 04.98-0
(kvaliteediklass: Q)"

• Pressure [bar]: 0.4
• Thread Size: 1/8 GAS
• Manufacturer: MEAT&DORIA

• Fabrication Number: ECT-TY-004
• Name: NTY ECT-TY-004
• Manufacturer: NTY

• Switch Pressure [bar]: 0.3
• Thread Size: 1/8x28 BSPT
• Sensor Type: Closed-type Sensor
• Name: OLISURVELšLITUS
• Manufacturer: VER

• Engine Code: K3-VE
• Pressure [bar]: 0
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Name: EP 1.800.016
• Manufacturer: EPS

• Pressure [bar]: 1.5
• Housing Colour: black
• Thread Size: R1/8
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: DELPHI

• Thread Size: 1/8x28 BSP
• Pressure [bar]: 0.3
• Colour: black
• Manufacturer: FAE

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: triangular
• Number of pins: 3
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 94856779
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Sensor Type: NTC Sensor
• Number of pins: 2
• Manufacturer: ERA

• Engine Code: K3-VE
• Number of pins: 2
• Manufacturer: KAVO

• for OE number: 89424-87703-000
• Colour: black
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connector Shape: oval
• Fabrication Number: ECT-MZ-000

• Engine Code: K3-VE
• Supplementary Article/Info 2: without connector parts
• Name: Andur,sisendohu temperatuur
• Manufacturer: MAX

• Fabrication Number: ECP-TY-003
• Manufacturer: NTY

• Sensor Type: Passive sensor
• for OE number: 6602998
• Manufacturer: KAMOKA

• Number of pins: 2
• Connector Shape: oval
• Colour: black
• Sensor Type: NTC Sensor
• for OE number: 89424-87703-000
• Manufacturer: MEAT&DORIA

Fabrication Number: ECP-TY-006

• Thread Size: M12x1.5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Construction Year to: 08.2006
• Number of pins: 2
• Supplementary Article/Info 2: without cable

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE SS10938

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Sensor Type: Passive sensor
• Manufacturer: KAMOKA

• Construction Year to: 08.2005
• for OE number: 90919-05024
• Number of pins: 2
• Length [mm]: 58
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Manufacturer: FAE
• Additional information: 33235 NRF
• Lisainfo: 33235 NRF

• Engine Code: K3-VE
• Supplementary Article/Info 2: without fastening clamp
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Number of pins: 2
• Name: Andur,sisendohu temperatuur
• Manufacturer: MEY

• Height [mm]: 30.3
• Resistor [Ohm]: 2,100
• Number of connectors: 2
• Manufacturer: VERNET

• Cable Length [mm]: 400
• Lambda Sensor: Heated, Thread pre-greased
• Number of circuits: 4
• Fabrication Number: ESL-DA-001
• Manufacturer: NTY

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Manufacturer: BREMI

• Engine Code: K3-VE
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Fitting Position: Front, after catalytic converter
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SB-017
• Manufacturer: NTY

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Engine Code: K3-VE
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Construction Year to: 08.2005
• Length [mm]: 58.1
• Number of connectors: 2
• Weight [kg]: 0.04
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 2
• Weight [kg]: 0.04
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Construction Year to: 07.2005
• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS

• Required quantity: 1
• Resistor [Ohm]: 2,100
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Number of connectors: 2
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 30
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Connector Shape: round
• Number of mounting bores: 1
• Weight [kg]: 0.2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 12.2001
• Lambda Sensor: Regulating Probe, Diagnostic Probe, Finger probe
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year to: 12.2001
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 147
• Manufacturer: DENSO
• Lisainfo: DOX-0109 DENSO
• Additional information: DOX-0109 DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Cable Length [mm]: 280
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Engine Code: K3-VE
• Voltage [V]: 12
• Length [mm]: 310
• Number of circuits: 4
• Weight [kg]: 0.09
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV023

• Lambda Sensor: Heated
• Number of pins: 4
• Cable Length [mm]: 500
• Fitting Position: Exhaust Manifold
• Manufacturer: MEAT&DORIA

• Construction Year to: 12.2007
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 2,250
• Weight [kg]: 0.04
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Construction Year to: 12.2001
• Lambda Sensor: Regulating Probe, Finger probe, Thread pre-greased
• Fitting Position: Exhaust Manifold
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 570
• Number of pins: 4
• Weight [kg]: 0.174
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 12.2001
• Construction Year to: 06.2007
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 95
• Gross Weight [g]: 144
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
SPACE WAGON (N5/W),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
SPACE WAGON (N5/W),
(kvaliteediklass: Q)"

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU013122001
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: K3-VE
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Length [mm]: 280
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Lambda Sensor: Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 165
• Weight [kg]: 0.112
• Name: LAMBDA ANDUR
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: K3-VE
• Number of pins: 2
• Manufacturer: FAE

• Construction Year to: 12.2001
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Lambda Sensor: Diagnostic Probe, Regulating Probe, Lambda Sensor
• Construction Year to: 12.2001
• Voltage [V]: 12
• Weight [kg]: 0.12
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV112

Exhaust System: after catalytic converter, before catalytic converter

• Engine Code: K3-VE
• Construction Year to: 12.2001
• Block Separation:
• Cable Length [mm]: 300
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Fitting Position: before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Number of connectors: 2
• Weight [kg]: 0.06
• Name: ANDUR, VŽNTVOLL
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.