• External Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Electrode Gap [mm]: 1.1
• Spark Plug: with gasket seat, 1 - Earthed Electrode
• Weight [kg]: 0.23
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fuel Type: CNG/LPG
• Supplementary Article/Info 2: Electrode gap must be set for operation on gas
• Replace after km: 15,000
• Electrode Gap [mm]: 0.7
• Length [mm]: 126
• Weight [kg]: 0.06
• Spark Plug: 1 - Earthed Electrode
• Version: E7EC1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fuel Type: CNG/LPG
• Supplementary Article/Info 2: Electrode gap must be set for operation on gas
• Replace after km: 15,000
• Electrode Gap [mm]: 0.7
• Length [mm]: 126
• Height [mm]: 51
• Weight [kg]: 0.062
• Spark Plug: 1 - Earthed Electrode
• Version: VR7EC1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fuel Type: CNG/LPG
• Supplementary Article/Info 2: Electrode gap must be set for operation on gas
• Replace after km: 15,000
• Required quantity: 3
• Electrode Gap [mm]: 0.9
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Spark Position [mm]: 3
• Number of pins: 1
• Name: SššTEKššNAL
• Manufacturer: BOS

• Engine Code: EJ-VE
• Required quantity: 3
• for OE number: 1WT2 18 110
• Connector type: Solid SAE
• Diameter [mm]: 14
• Spanner Size: 16
• Tightening Torque [Nm]: 22
• Weight [g]: 43
• Spark Plug: 1 - Earthed Electrode, Nickel mass electrode
• Thread Length [mm]: 19
• Manufacturer: DENSO
• Name: DN K16TT
• Lisainfo: K16TT DENSO
• Additional information: K16TT DENSO

• External Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Electrode Gap [mm]: 1
• Spark Plug: with gasket seat, 3 - Earthed Electrode
• Weight [kg]: 0.048
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 3
• Electrode Gap [mm]: 1
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Spark Position [mm]: 6
• Number of pins: 2
• Name: SššTEKššNAL
• Manufacturer: BOS

• Required quantity: 3
• Alternatively:
• Electrode Gap [mm]: 0.9
• Connector type: SAE
• Thread Size: M14x1,25
• Spanner Size: 16 mm
• Quality/ Grade: Poly-V Tit
• Spark Plug: 1 - Earthed Electrode, with gasket seat
• Thread Length [mm]: 19
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Name: SššTEKššNAL
• Manufacturer: BERU

• Electrode Gap [mm]: 1
• Spark Plug: 2 - Earthed Electrode
• Weight [kg]: 0.046
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: EJ-VE
• Required quantity: 3
• for OE number: 101-000-033AC
• Connector type: Solid SAE
• Diameter [mm]: 14
• Spanner Size: 16
• Tightening Torque [Nm]: 22
• Weight [g]: 43
• Spark Plug: 2 - Earthed Electrode, Nickel mass electrode
• Thread Length [mm]: 19
• Manufacturer: DENSO

• Required quantity: 3
• Electrode Gap [mm]: 1
• Connector type: M4/SAE
• Thread Size: M14x1.25
• Spanner Size: 16 mm
• Quality/ Grade: Nickel GE
• Packing Type: Box
• Thread Length [mm]: 19
• Technical Information Number: RC10DMC
• Spark Position [mm]: 6.1
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 8.85
• Packaging width [cm]: 2.6
• Packaging height [cm]: 2.35
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 9
• Projection [mm]: 3.6
• Name: CH OE019/T10
• Manufacturer: CHAMPION

Spark Plug: 2 - Earthed Electrode, with gasket seat, Copper Centre Electrode

• Tightening Torque [Nm]: 25
• Electrode Gap [mm]: 1
• Thread Size: M14 x 1.25
• Spanner Size: 16
• Spark Plug: 1 - Earthed Electrode
• Thread Length [mm]: 19
• Assy./disassy. by qualified personnel required!:
• Name: HE 8EH188705041
• Manufacturer: HELLA

• Required quantity: 3
• Electrode Gap [mm]: 1
• Connector type: SAE
• Thread Size: M14x1,25
• Spanner Size: 16 mm
• Spark Plug: 2 - Earthed Electrode, with gasket seat
• Thread Length [mm]: 19
• Technical Information Number: 14 FR-8 LDUOX4
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Name: SššTEKššNAL
• Manufacturer: BERU

• Engine Code: EJ-VE
• for OE number: 9004851165000
• Spanner Size: 16 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 5.2
• Name: SššTEKššNAL
• Manufacturer: NGK

Spark Plug: Nickel Middle Electrode, 2 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector

• Required quantity: 3
• Electrode Gap [mm]: 0.9
• Connector type: SAE
• Thread Size: M14x1,25
• Spanner Size: 16 mm
• Spark Plug: 2 - Earthed Electrode, with gasket seat
• Thread Length [mm]: 19
• Technical Information Number: 14 FGHR-7 LDUW
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Name: SššTEKššNAL
• Manufacturer: BERU

• Fuel Type: CNG/LPG
• Replace after km: 30,000
• Required quantity: 3
• Electrode Gap [mm]: 0.7
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Spark Position [mm]: 4
• Number of pins: 1
• Name: SššTEKššNAL
• Manufacturer: BOS

• Engine Code: EJ-VE
• Required quantity: 3
• Fuel Type: CNG/LPG
• Connector type: Solid SAE
• Diameter [mm]: 14
• Spanner Size: 16
• Tightening Torque [Nm]: 22
• Weight [g]: 43
• Country Specific Design: Japan
• Spark Plug: 1 - Earthed Electrode, Platinum mass electrode
• Thread Length [mm]: 19
• Manufacturer: DENSO
• Name: DN IK16TT
• Lisainfo: IK16TT DENSO
• Additional information: IK16TT DENSO

• Engine Code: EJ-VE
• for OE number: 9004851165000
• Spanner Size: 16 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3.5
• Manufacturer: NGK

Spark Plug: Iridium Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector