• Thread Size: 9 mm
• Manufacturer: VERNET
• Additional information: WS2698
• Lisainfo: WS2698

• Seerianumber: ECT-ME-004
• Manufacturer: NTY
• Name: NTY ECT-ME-004

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• for OE number: 5080147AA
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Thread Size: 15 mm
• Manufacturer: VERNET

• Pistikkontaktide arv: 2
• Manufacturer: ERA

• Colour: black
• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• for OE number: 05080352AA
• Sensor Type: Passive sensor
• Manufacturer: KAMOKA

• OE-numbri jaoks: 005 153 50 28, 2E0 906 051 A
• Pistikkontaktide arv: 3
• Surve alates [kPA]: 10
• Surve kuni [kPA]: 127
• Seerianumber: ECM-ME-000
• Manufacturer: NTY

• Pinge [V]: 12
• Pistikkontaktide arv: 2
• Anduritüüp: Induktiivandur
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Mounting Type: Clamped
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT358058181
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Installatsiooni sügavus (mm): 24,3
• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistikukatte kuju: ovaalne
• Seerianumber: ECP-ME-000
• Manufacturer: NTY

• Housing Colour: black
• Number of pins: 2
• Spanner Size: 0
• Name: DE TS10269
• Manufacturer: DELPHI

• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistikkontaktide arv: 3
• Anduritüüp: Hallsensor
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Pistikkontaktide arv: 3
• Garantii: 3 aastat garantii
• Kaal (kg): 0,04
• Värv: must
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV ESEN

• Height [mm]: 18.2
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Manufacturer: VIEROL

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Passive sensor
• Supplementary Article/Info 2: without cable
• Voltage [V]: 12
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MAX

• Fitting Position: both sides
• Installatsiooni pool: taga, ees
• Anduritüüp: Ultraheliandur
• Pikkus (mm): 47
• pikkus [mm]: 47
• Laius (mm): 33
• Kõrgus (mm): 31
• Värv: must
• Kuju: gewinkelt
• Piirangutega toode/piirangu info: koos tihendiga
• Pealispind: krundeeritud
• Ühenduste arv: 4
• keem.omadus: ülevärvitav
• Name: Parking sensor
• Quality class: PJ

Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)

• Required quantity: 1
• Number of pins: 2
• Sensor Type: NTC Sensor
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Seerianumber: ECP-ME-003
• Manufacturer: NTY

• Required quantity: 1
• Pistikkontaktide arv: 2
• Anduritüüp: Induktiivandur
• Piirangutega toode/piirangu info 2: ilma kaablita
• Korpusevärv: must
• Manufacturer: BRM

Name: CZUJNIK POO½ENIA WAU KORB. DB A KLASA W168 1,4 97-

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: 0
• Thread Size: 0
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Ühenduste arv: 2
• Manufacturer: JPN

• Värv: must
• Anduritüüp: passiivne andur, Induktiivandur
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistikukatte kuju: D-kuju
• vajaminev tükihulk: 1
• Montaaživiis: kruvitud
• Manufacturer: FAST

• Number of pins: 3
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: MAX

• Fitting Position: Left, Right
• Colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: MAGNETI MARELLI
• Name: MM SDP118

• Height [mm]: 40
• Resistor [Ohm]: 1,150
• Number of connectors: 2
• Manufacturer: VERNET

• Number of pins: 2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

• Number of pins: 2
• Connector Shape: D Shape
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Quality: OE EQUIVALENT
• for OE number: 5080350AA
• Name: Andur, v„ntvoll
• Manufacturer: MD

• Quantity: 1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Inductive Sensor, Passive sensor
• Number of connectors: 2
• Required quantity: 1
• Resistor [Ohm]: 680
• Alternatively:
• Colour: black
• Operating Mode: Electric
• Mounting Type: Bolted
• Number of pins: 2
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 40
• Supplementary Article/Info 2: without cable
• Connector Shape: D Shape
• Number of mounting bores: 1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 4
• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PG013114371

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• Sensor Type: Active sensor
• Cable Length [mm]: 490
• Fitting Position: Front Axle Right, Front Axle Left
• Manufacturer: AUTOFREN SEINSA

• Required quantity: 1
• Pistikkontaktide arv: 3
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: ilma kaablita
• Korpusevärv: must
• Manufacturer: BRM

Name: CZUJNIK POO½ENIA WAKA ROZRZ. PORSCHE 911, 911 TARGA, BOXSTER, BOXSTER SPYDER, CAYENNE, CAYMAN 2.7-4.8 07.04-

• Fitting Position: both sides, Front, Rear
• Required quantity: 10
• Supplementary Article/Supplementary Info: with gaskets/seals
• Diameter [mm]: 15.38
• Chemical Properties: Paintable
• Name: Sensor, parkimisabi
• Manufacturer: TRI

• Quantity: 1
• Number of pins: 3
• Pressure from [kPA]: 10
• Manufacturer: DELPHI

• Measuring Range from [kPa]: 15
• Measuring Range to [kPa]: 260
• Measuring Range from [V]: 0.4
• Measuring Range to [V]: 4.65
• Number of connectors: 3
• Manufacturer: VERNET

• Number of mounting bores: 1
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Mounting Type: Bolted
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, VŽNTVOLL
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Name: DETONATSIOONIANDUR
• Manufacturer: BOS

• Required quantity: 1
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 23.8
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Number of pins: 2
• Manufacturer: FAE

• Fitting Position: Rear Axle
• Required quantity: 2
• Cable Length [mm]: 531
• Fitting Depth [mm]: 12.4
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• for OE number: A0055422318
• Specification: Complete Unit, For 1 Wheel, Sensor and Valve
• Garantii: 3 aastat garantii
• Sagedusala [MHz]: 433
• programmeeritud:
• Kaal (kg): 0,05
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Quantity: 1
• Number of pins: 3
• Pressure from [kPA]: 21
• Manufacturer: DELPHI

• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Fitting Position: both sides, Front, Rear
• Number of pins: 4
• Chemical Properties: Paintable
• Manufacturer: FAE ELEKTRYKA

• Required quantity: 1
• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 12060-00-3; Lead titanium trioxide, 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Quantity: 1
• Alternatively:
• Number of pins: 3
• Manufacturer: DELPHI

• Height [mm]: 24.2
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 1,150
• Manufacturer: VALEO
• Name: VA 254008

• Anduritüüp: Hallsensor
• valikuliselt:
• Pistikkontaktide arv: 3
• Installatsiooni sügavus (mm): 24
• Manufacturer: ERA

• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 24.2
• Supplementary Article/Info 2: with seal ring, without cable
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead, 872-50-4; 1-Methyl-2-pyrrolidone
• Name: Andur,Nukkvollipositsioon
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS

• Quantity: 1
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11151

• Required quantity: 1
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: Andur,kompressorirohk
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Mounting Type: Bolted
• Number of pins: 3
• Supplementary Article/Supplementary Info: with gasket/seal
• Assy./disassy. by qualified personnel required!:
• Name: Andur,kompressorirohk
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

Manufacturer: NRF

• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Finger-type Sensor Fitting Position: before catalytic converter, after catalytic converter

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Valve stem material: Solid rubber
• Assy./disassy. by qualified personnel required!:
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Colour: black
• Assy./disassy. by qualified personnel required!:
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Valve stem material: Aluminium
• Assy./disassy. by qualified personnel required!:
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Required quantity: 10
• Fitting Position: both sides, Front, Rear
• Number of pins: 4
• Chemical Properties: Paintable
• Mounting Type: Plugged
• Socket colour: black
• Supplementary Article/Supplementary Info: with fastening ring
• Assy./disassy. by qualified personnel required!:
• Name: Sensor, parkimisabi
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Pressure from [kPA]: 50
• Pressure to [kPA]: 1,155
• Manufacturer: FAE ELEKTRYKA

• Production date from: 21.03.2006
• Vehicle Identification Number (VIN) from: A 001595
• Engine Code: M 285.950
• External Thread [mm]: M10 X 1 MM
• Spanner Size: 24
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: PIERBURG

• Oxygen Sensor: Regulating Sensor, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Fitting Position: Left Front, Right Front
• Oxygen Sensor: Diagnostic Probe
• Length [mm]: 470
• Number of connectors: 4
• Manufacturer: VERNET

• Fitting Position: Left, Right, Front, after catalytic converter
• Oxygen Sensor: Diagnostic Probe, Planar Sensor, Heated
• Quantity: 2
• Cable Length [mm]: 470
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
KLASA E (W210), 06.9
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
KLASA E (W210), 06.9
(kvaliteediklass: PJ)"

• Frequency Range [MHz]: 433
• Programmed:
• Tightening Torque [Nm]: 4
• Assy./disassy. by qualified personnel required!:
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HEL

Brief Information: "Fully programmed and ready for installation! No need for complex sensor programming. Significantly saves time in workshops! Calibration by the corresponding vehicle manufacturers is al l it takes.

• Number of connectors: 3
• for OE number: 004 542 16 18
• Name: Andur,ktuserohk
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Left, Right, Front, after catalytic converter
• Oxygen Sensor: Diagnostic Probe, Planar Sensor, Heated
• Quantity: 2
• Cable Length [mm]: 280
• Manufacturer: DELPHI
• Name: DE ES20312-12B1

• for OE number: A 006 153 98 28
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: koos kaabliga
• Seerianumber: EPO-ME-001
• Manufacturer: NTY