Manufacturer: MAGNETI MARELLI

• Engine Code: 4HP (DW12BTED4)
• Colour: green
• Housing Type: Synthetic Material Housing
• for article number: 7.8486, 7.8708, 7.8734, 7.8747, 7.8748, 7.8790
• Manufacturer: FACET

• Engine Code: 4HP (DW12BTED4)
• Colour: green
• Housing Type: Synthetic Material Housing
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.880.486, 1.880.708, 1.880.734, 1.880.747, 1.880.748, 1.880.790

• Number of pins: 2
• Fitted Diameter [mm]: 20
• Housing Colour: green
• Manufacturer: FAE

• Engine Code: 4HP (DW12BTED4)
• Corresponds to the original part in colour: green
• Manufacturer: FACET

• Fabrication Number: ECP-CT-013
• Manufacturer: NTY

• Construction Year to: 07.2010
• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 2
• Housing Colour: black
• Manufacturer: DELPHI

• Engine Code: 4HP (DW12BTED4)
• Corresponds to the original part in colour: green
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Corresponds to the original part in colour: green
• Manufacturer: FAST

• Construction Year from: 10.2006
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.03
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV500

• Sensor Type: Hall Sensor
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MEY

• Engine Code: 4HP (DW12BTED4)
• Voltage [V]: 12
• Sensor Type: NTC Sensor
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE ELEKTRYKA

• for OE number: 1920.7V
• Sensor Type: Active sensor
• Manufacturer: KAMOKA

• Thread Size: 12 mm
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: VER

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.01
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Connector Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.96
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 4HP (DW12BTED4)
• Manufacturer: FACET

• Height [mm]: 23.3
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Engine Code: 4HP (DW12BTED4)
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Construction Year from: 10.2007
• Colour: black
• Material: Plastic
• Number of connectors: 3
• Observe service information:
• Fabrication Number: ECS-CT-000
• Manufacturer: NTY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Number of pins: 3
• Socket colour: grey
• Sensor Type: Hall Sensor
• Fitting Depth [mm]: 22
• for OE number: 1920QN
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Housing Colour: white
• Manufacturer: FAE

• Engine Code: 4HP (DW12BTED4)
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Construction Year to: 10.2007
• Number of pins: 3
• Housing Colour: black
• Manufacturer: FAE

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: grey
• Manufacturer: BREMI

• Fabrication Number: ECM-CT-009
• Manufacturer: NTY

• Pressure from [kPA]: 42
• Fabrication Number: ECM-CT-008
• Manufacturer: NTY

• Length [mm]: 55.5
• Outer Diameter [mm]: 11
• Number of connectors: 3
• Weight [kg]: 0.021
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009109321
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Corresponds to the original part in colour: grey
• Number of pins: 3
• Colour Coding: black
• Sensor Type: Impulse Sensor
• Assy./disassy. by qualified personnel required!:
• Name: Andur,Nukkvollipositsioon
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Fitting Depth [mm]: 22
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Construction Year from: 10.2007
• Exhaust System: before soot particulate filter
• Number of pins: 3
• for OE number: 13627805472
• Name: Andur, heitgaasisurve
• Manufacturer: NRF

• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Connector Shape: rectangular
• Number of pins: 3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO
• Name: VA 253808

• Number of connectors: 3
• Colour: black
• Material: Plastic
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.02
• Observe service information:
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 55.5
• Outer Diameter [mm]: 11
• Number of connectors: 3
• Weight [kg]: 0.021
• Name: SW 62 93 1240
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Intake Manifold
• Number of pins: 3
• Manufacturer: JPN

• Required quantity: 1
• Manufacturer: BREMI

• Number of connectors: 3
• Colour: black
• Material: Plastic
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.024
• Observe service information:
• Manufacturer: BLUE PRINT ELEKTRYKA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 10.2007
• Number of pins: 3
• Manufacturer: JPN

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV334

• Engine Code: 4HP (DW12BTED4)
• Construction Year from: 10.2007
• Exhaust System: before soot particulate filter
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Construction Year to: 09.2007
• Number of pins: 3
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: MAX

• Engine Code: 4HP (DW12BTED4)
• Construction Year from: 10.2007
• Exhaust System: before soot particulate filter
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Construction Year to: 07.2010
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

Manufacturer: FAST

• Number of pins: 3
• Number of connectors: 2
• Quality: OE EQUIVALENT
• for OE number: 1865A176
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Pressure to [bar]: 1
• Pressure [Pa] to: 100,000
• Manufacturer: FAE ELEKTRYKA

• Engine Code: 4HP (DW12BTED4)
• Supplementary Article/Info 2: Suction Pipe
• Number of pins: 3
• Weight [kg]: 0.018
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY

• Number of pins: 3
• Manufacturer: JPN

• Construction Year to: 09.2007
• Exhaust System: before soot particulate filter
• Number of pins: 3
• Pressure [Pa] from: 0
• Pressure [Pa] to: 99,000
• Manufacturer: NRF

• Number of pins: 3
• Manufacturer: TOPRAN

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Intake Manifold
• Number of pins: 3
• Pressure from [kPA]: 44
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: DLP

• Number of pins: 3
• Quality: OE EQUIVALENT
• for OE number: 9649396580
• Manufacturer: MEAT&DORIA

• Pressure [Pa] to: 100,000
• Voltage from [V]: 0.5
• Voltage to [V]: 4.5
• Number of pins: 3
• Guarantee: 5 years guarantee
• Name: Andur, heitgaasisurve
• Manufacturer: HUC

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• for RPO number from: 11284
• Construction Year from: 10.2007
• Weight [kg]: 0.02
• Number of pins: 3
• Connector Shape: oval
• Number of circuits: 2
• Number of mounting bores: 1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Manufacturer: FAST

• Diameter [mm]: 12.5
• Manufacturer: VALEO
• Name: VA 255601

• Construction Year from: 10.2007
• Exhaust System: before soot particulate filter
• Mounting Type: Bolted
• Number of pins: 3
• Measuring Range from [kPa]: 0
• Measuring Range to [kPa]: 100
• Measuring Range from [V]: 0.5
• Measuring Range to [V]: 4.5
• Number of connectors: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PP009409101

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Housing Type: with housing
• Fabrication Number: EPP-CT-004
• Manufacturer: NTY

• Engine Code: 4HP (DW12BTED4)
• Pressure from [kPA]: 27
• Pressure to [kPA]: 327
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Fitting Position: Exhaust Manifold
• Number of pins: 3
• Pressure from [kPA]: 42
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: DLP

• Engine Code: 4HP (DW12BTED4)
• Construction Year to: 09.2007
• Exhaust System: before soot particulate filter
• Pressure to [kPA]: 100
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Manufacturer: FACET

• Engine Code: 4HP (DW12BTED4)
• Pressure from [kPA]: 27
• Pressure to [kPA]: 327
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Engine Code: 4HP (DW12BTED4)
• Construction Year to: 09.2007
• Exhaust System: before soot particulate filter
• Pressure to [kPA]: 100
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Name: Andur, heitgaasisurve
• Manufacturer: EPS

• for RPO number from: 11284
• Construction Year from: 10.2007
• Number of pins: 3
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: MEY

• Engine Code: 4HP (DW12BTED4)
• Number of pins: 3
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY

• Construction Year from: 10.2007
• Manufacturer: MAGNETI MARELLI

• Construction Year from: 10.2007
• Exhaust System: before soot particulate filter
• Number of pins: 3
• Opening pressure [kPa]: 0.6
• Manufacturer: DELPHI
• Name: DE DPS00006

• Construction Year from: 10.2007
• Exhaust System: before soot particulate filter
• Mounting Type: Bolted
• Number of pins: 3
• Diameter 2 [mm]: 10
• Diameter 1 [mm]: 10
• Assy./disassy. by qualified personnel required!:
• Name: Andur, heitgaasisurve
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: 4HP (DW12BTED4)
• Pressure from [kPA]: 27
• Pressure to [kPA]: 327
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Cable Length [mm]: 200
• Manufacturer Restriction: Ford, Citroen, Peugeot
• Number of pins: 3
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable Cross Section [mm²]: 0.75
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• for OE number: 1920 PW
• for article number: 70610037
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, ohuvotu rohu andur
• Manufacturer: HBE

• Engine Code: 4HP (DW12BTED4)
• Pressure from [kPA]: 27
• Pressure to [kPA]: 327
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

Manufacturer: MAGNETI MARELLI

• Number of pins: 3
• Colour: black
• Material: Plastic
• Manufacturer: AIC

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Oxygen Sensor: Diagnostic Probe, Regulating Probe
• Construction Year to: 09.2007
• Fitting Position: Rear, before catalytic converter
• Required quantity: 1
• Catalytic Converter Type: for vehicles with catalytic converter
• Vehicle Equipment: for vehicles with diesel soot filter
• Voltage [V]: 12
• Cable Length [mm]: 400
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.14
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• Supplementary Article/Info 2: with seal ring, without cable
• Pressure from [kPA]: 26.7
• Pressure to [kPA]: 326.7
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• for OE number: 1618 LE
• Number of pins: 2
• Connector Shape: rectangular
• Socket colour: brown
• Fabrication Number: EGT-CT-003
• Cable Length [mm]: 790
• Manufacturer: NTY

• Number of pins: 3
• Number of connectors: 2
• for OE number: 9662143180
• Manufacturer: MEAT & DORIA

• Engine Code: 4HP (DW12BTED4)
• Length [mm]: 410
• Switching Capacity [W]: 7.5
• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Fitting Position: before catalytic converter
• Cable Length [mm]: 410
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.14
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• Construction Year from: 11.2007
• Construction Year to: 07.2010
• for RPO number from: 11284
• Manufacturer: BOSCH

• Construction Year to: 09.2007
• Fitting Position: before soot particulate filter
• Weight [kg]: 0.115
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Supplementary Article/Supplementary Info: with holder
• Number of connectors: 2
• Quality: OE EQUIVALENT
• for OE number: 1618ET
• Manufacturer: MEAT & DORIA

• Oxygen Sensor: Regulating Probe
• Fitting Position: Front
• Number of connectors: 5
• Manufacturer: VERNET

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Colour: red
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Manufacturer: SKV GERMANY
• Name: CE 09SKV915

• Oxygen Sensor: Broadband oxygen sensor
• Number of pins: 5
• Cable Length [mm]: 410
• for OE number: 55204005
• Manufacturer: MEAT&DORIA

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: rectangular
• Number of pins: 3