Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
for OE number: 1628HV,
4571477 - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
-
Cable Length [mm]: 1,
640 - Number of pins: 4
- Weight [g]: 110
- Gross Weight [g]: 143
- Manufacturer: DENSO
Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor
Additional information: "Tootja: DENSO
406 (8B), 10.95-05.0
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
406 (8B), 10.95-05.0
(kvaliteediklass: Q)"
- Number of circuits: 4
- Lambda Sensor: Regulating Probe
- Manufacturer: KAMOKA
-
Lambda Sensor: Diagnostic Probe,
Thread pre- greased -
Fabrication Number: ESL-
SK- 000 - Manufacturer: NTY
-
Name: NTY ESL-
SK- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Lambda Sensor: Diagnostic Probe
-
Length [mm]: 1,
500 -
Fabrication Number: ESL-
CT- 018 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Cable Length [mm]: 1,
235 - Lambda Sensor: Diagnostic Probe
- Number of circuits: 4
- Manufacturer: DELLO AUTOMEGA
- Construction Year to: 03.2008
-
Lambda Sensor: Diagnostic Probe,
Heated - Fitting Position: after catalytic converter
- Number of circuits: 4
-
Overall Length [mm]: 1,
220 - Name: LAMBDA ANDUR
- Manufacturer: MAX
- Construction Year to: 03.2008
-
Lambda Sensor: Regulating Probe,
Diagnostic Probe, Heated - Block Separation:
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Lisainfo: MGS-
615 -
Additional information: MGS-
615
Fitting Position: before catalytic converter, after catalytic converter
- Lambda Sensor: Regulating Probe
-
Engine Code: RFK
(EW10J4S) - Voltage [V]: 12
-
Length [mm]: 1,
490 - Number of circuits: 4
- Weight [kg]: 0.15
- Operating Mode: Electric
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Name: CE 09SKV039
- Engine Code: RFK
- Construction Year to: 03.2008
-
Lambda Sensor: Diagnostic Probe,
Thread pre- greased - Fitting Position: after catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Cable Length [mm]: 1,
250 - Number of circuits: 4
- Version: ZR PLANAR
- Weight [kg]: 0.181
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Lambda Sensor: Diagnostic Probe,
Planar probe, Heated - Fitting Position: after catalytic converter
- Cable Length [mm]: 525
- Name: LAMBDA ANDUR
- Manufacturer: DLP
- Quality class: PJ
Additional information: "Tootja: DELPHI
406 (8B), 10.95-05.0
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
406 (8B), 10.95-05.0
(kvaliteediklass: PJ)"
- Lambda Sensor: Lambda Sensor
-
Cable Length [mm]: 1,
320 - Number of circuits: 4
- Manufacturer: ERA
-
Lambda Sensor: Diagnostic Probe,
Planar probe, Heated - Fitting Position: after catalytic converter
- Cable Length [mm]: 380
- Name: LAMBDA ANDUR
- Manufacturer: DLP
- Lambda Sensor: Diagnostic Probe
-
Engine Code: RFK
(EW10J4S) - Voltage [V]: 12
-
Length [mm]: 1,
230 - Number of circuits: 4
- Weight [kg]: 0.11
- Operating Mode: Electric
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Name: CE 09SKV037
-
Lambda Sensor: Diagnostic Probe,
Planar probe, Heated - Fitting Position: after catalytic converter
- Cable Length [mm]: 530
- Name: LAMBDA ANDUR
- Manufacturer: DLP
- Conductor Number: 4
- Resistor [Ohm]: 9
-
Length [mm]: 1,
520 - Number of circuits: 4
-
Cable Length [mm]: 1,
520 - Lambda Sensor: Heated
- Name: LAMBDA ANDUR
- Manufacturer: MAG
-
Engine Code: RFK
(EW10J4S) -
Line insulation design: with silicone-
coated woven- fibre insulation - Number of pins: 4
- for OE number: V99760001
- Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Length [mm]: 350
- Exhaust System: after catalytic converter
- Manufacturer: VEMO GERMANY
Lambda Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 12.2004
- Fitting Position: after catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Lambda Sensor: Planar probe,
Heated, Thread pre- greased - Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Manufacturer: VEMO GERMANY
Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Lambda Sensor: Diagnostic Probe,
Heated - Fitting Position: after catalytic converter
- Cable Length [mm]: 470
- Number of pins: 4
- Assy./disassy. by qualified personnel required!:
- Name: Lambda andur
- Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Construction Year to: 03.2008
-
Lambda Sensor: Regulating Probe,
Diagnostic Probe - Block Separation:
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
Fitting Position: before catalytic converter, after catalytic converter
- Lambda Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Voltage [V]: 12
-
Length [mm]: 1,
260 - Number of circuits: 4
- Weight [kg]: 0.17
- Resistor [Ohm]: 9
- Operating Mode: Electric
- Warranty: 3 years warranty
- Name: CE 09SKV711
- Manufacturer: ESEN SKV
-
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 93
- Gross Weight [g]: 140
- Manufacturer: DENSO
-
Name: DN DOX-
0150 - Quality class: Q
Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
- Construction Year to: 03.2008
- Lambda Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
-
Overall Length [mm]: 1,
260 - Available as universal article as well, see article no.: 0258986615
-
Recommended change interval [km]: 160,
000 - Manufacturer: BOSCH
- Name: BS 0258006026
-
Lambda Sensor: Diagnostic Probe,
Planar probe, Heated - Fitting Position: after catalytic converter
- Cable Length [mm]: 540
- Manufacturer: DELPHI
-
Name: DE ES20258-
12B1
-
Lambda Sensor: Regulating Probe,
Planar probe, Heated - Fitting Position: before catalytic converter
- Cable Length [mm]: 1
-
Name: DE ES20307-
12B1 - Manufacturer: DELPHI
- Construction Year to: 03.2008
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 4
-
Overall Length [mm]: 1,
510 - Available as universal article as well, see article no.: 0258986615
-
Recommended change interval [km]: 160,
000 - Manufacturer: BOSCH
- Name: BS 0258006029
- Transmission Type: Manual Transmission
-
Lambda Sensor: Regulating Probe,
Thread pre- greased - Fitting Position: before catalytic converter
- Line insulation design: with thermal protection flexible insulating tubing
- Connector Shape: angular
-
Thread Size: M18x1,
5 -
Length [mm]: 1,
250 - Number of circuits: 4
- Weight [kg]: 0.19
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity: 1
-
Engine Code: RFK
(EW10J4S) - Block Separation:
- Cable Length [mm]: 1
- Manufacturer: DELPHI
-
Name: DE ES20309-
12B1
Lambda Sensor: Diagnostic Probe, Regulating Probe, Planar probe, Heated Fitting Position: after catalytic converter, before catalytic converter
-
for OE number: 1628HQ,
8677894 -
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
-
Cable Length [mm]: 1,
250 - Number of pins: 4
- Weight [g]: 102
- Gross Weight [g]: 135
- Manufacturer: DENSO
-
Name: DN DOX-
2045 -
Lisainfo: DOX-
2045 DENSO -
Additional information: DOX-
2045 DENSO
Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor
-
Engine Code: RFK
(EW10J4S) - Fitting Position: before catalytic converter
-
Length [mm]: 1,
500 -
Cable Length [mm]: 1,
500 - Conductor Number: 4
- Available as universal article as well, see article no.: 1.998.240
- Number of circuits: 4
- Name: EP 1.998.301
- Manufacturer: EPS
Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased