• for OE number: 1628HR, 9635978280
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 400
• Number of pins: 4
• Weight [g]: 113
• Gross Weight [g]: 146
• Manufacturer: DENSO
• Name: DN DOX-2001

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
306 (7B, N3, N5), 04
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
306 (7B, N3, N5), 04
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Overall Length [mm]: 565
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-CT-009
• Manufacturer: NTY

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-011
• Manufacturer: NTY
• Name: NTY ESL-AU-011

• Length [mm]: 550
• Fitting Position: Front, after catalytic converter
• Transmission Type: Automatic Transmission
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-CT-000
• Manufacturer: NTY
• Name: NTY ESL-CT-000

• Length [mm]: 410
• Fabrication Number: ESL-CT-007
• Manufacturer: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Cable Length [mm]: 570
• Thread Size: M18x1,5
• Spanner Size: 22
• for OE number: 1628HN
• Manufacturer: DELLO AUTOMEGA

• Engine Code: NFU (TU5JP4)
• Lambda Sensor: Regulating Probe
• Number of circuits: 4
• Supplementary Article/Info 2: without plug
• Manufacturer: ENERGY

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 370
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Construction Year to: 07.2008
• Lambda Sensor: Regulating Probe, Diagnostic Probe, Heated
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

Fitting Position: before catalytic converter, after catalytic converter

• Engine Code: TU5JP4
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 1,250
• Number of circuits: 4
• Version: ZR PLANAR
• Weight [kg]: 0.181
• Lambda Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 525
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
406 (8B), 10.95-05.0
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
406 (8B), 10.95-05.0
(kvaliteediklass: PJ)"

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 380
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Length [mm]: 536
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV062
• Manufacturer: ESEN SKV

• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 300
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 07.2008
• Lambda Sensor: Regulating Probe, Heated, Thread pre-greased
• Fitting Position: Exhaust Manifold
• Line insulation design: with silicone-coated woven-fibre insulation
• Conductor Number: 4
• Connector Shape: angular
• Thread Size: 18x1,5
• Length [mm]: 400
• Number of circuits: 4
• Version: ZR PLANAR
• Weight [kg]: 0.163
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 565
• Number of circuits: 4
• Weight [kg]: 0.14
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV689

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Engine Code: NFU (TU5JP4)
• Voltage [V]: 12
• Length [mm]: 540
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Construction Year to: 07.2008
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 565
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 530
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Resistor [Ohm]: 9
• Conductor Number: 4
• Number of circuits: 4
• Length [mm]: 570
• Cable Length [mm]: 570
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Lambda Sensor: Regulating Probe, Diagnostic Probe, Heated
• Block Separation:
• Emission Standard: EEC 2000, Euro 4
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 570
• Weight [kg]: 0.092
• for OE number: 1618.Z6
• Name: SW 33 10 3089
• Manufacturer: SWAG

Fitting Position: before catalytic converter, after catalytic converter General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 07.2008
• Lambda Sensor: Regulating Probe, Unheated
• Fitting Position: Exhaust Manifold
• Number of pins: 4
• Cable Length [mm]: 540
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Length [mm]: 565
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV696
• Manufacturer: ESEN SKV

• Engine Code: NFU
• Emission Standard: L4, L5
• Lambda Sensor: Diagnostic Probe, Heated, Thread pre-greased
• Fitting Position: after catalytic converter
• Block Separation:
• Construction Year from: 04.2008
• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: 18x1,5
• Connector Shape: angular
• Cable Length [mm]: 400
• Conductor Number: 4
• Length [mm]: 630
• Number of circuits: 4
• Version: ZR PLANAR
• Weight [kg]: 0.137
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 600
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front, after catalytic converter
• Lambda Sensor: Diagnostic Probe, Heated, Thread pre-greased
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Number of circuits: 4
• Socket colour: green
• Connector Shape: rectangular
• Thread Size: M18 x 1,5
• Weight [kg]: 0.138
• for OE number: 96 369 687 80
• Cable Length [mm]: 500
• Length [mm]: 600
• Number of connectors: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Fitting Position: before catalytic converter, after catalytic converter Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Planar probe
• Number of pins: 4
• Cable Length [mm]: 1,370
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Construction Year to: 07.2008
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Construction Year to: 07.2008
• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 1,760
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• for OE number: 1628KY, 55353148
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 550
• Number of pins: 4
• Weight [g]: 99
• Gross Weight [g]: 132
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
106 II (1), 04.96-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
106 II (1), 04.96-
(kvaliteediklass: Q)"

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 540
• Manufacturer: DELPHI
• Name: DE ES20258-12B1

• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Length [mm]: 600
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Length [mm]: 570
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Engine Code: NFU (TU5JP4)
• Fitting Position: after catalytic converter
• Switching Capacity [W]: 18
• Length [mm]: 550
• Cable Length [mm]: 570
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.997.007
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Cable Length [mm]: 570
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Diagnostic Probe
• Construction Year to: 07.2008
• Fitting Position: after catalytic converter
• Length [mm]: 570
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Construction Year to: 07.2008
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 565
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Engine Code: NFU (TU5JP4)
• Fitting Position: after catalytic converter
• Switching Capacity [W]: 7
• Length [mm]: 550
• Cable Length [mm]: 1,500
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.240
• Number of circuits: 4
• Name: EP 1.998.301
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Lambda Sensor: Planar probe
• Number of pins: 4
• Cable Length [mm]: 1,370
• for OE number: 9622997780
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 530
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PA358103391
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.