• Number of pins: 2
• Connector Shape: rectangular
• Fabrication Number: ECT-RE-000
• Manufacturer: NTY
• Name: NTY ECT-RE-000

• Number of pins: 2
• Socket colour: green
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• for OE number: 9636777180, 89422 02020
• Manufacturer: MEAT&DORIA

• Connector Shape: rectangular
• Number of pins: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: RFN (EW10J4)
• Corresponds to the original part in colour: brown, green
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS
• Additional information: 1-994-005
• Lisainfo: 1-994-005

• Number of pins: 2
• Connector Shape: rectangular
• Weight [kg]: 0.01
• Outer Diameter [mm]: 17
• Housing Diameter [mm]: 12
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Number of pins: 2
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: MAX

• Supplementary Article/Info 2: without cable
• Housing Colour: white
• Transmission Type: Manual Transmission, Automatic Transmission
• Fabrication Number: ESS-PE-000
• Manufacturer: NTY

• Number of connectors: 2
• Weight [kg]: 0.01
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 07.2003
• for RPO number up to: 09729
• Number of pins: 2
• Manufacturer: DELLO AUTOMEGA

• Engine Code: RFN (EW10J4)
• Colour: green
• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: FACET
• Name: EP 1.830.276

• Fabrication Number: ESS-CT-001
• Manufacturer: NTY

• Fabrication Number: ECM-CT-012
• Manufacturer: NTY

• Thread Size: M12 x 1,5
• Spanner Size: 19
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Weight [kg]: 0.035
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Weight [kg]: 0.03
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Colour: grey
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: METZGER

Manufacturer: MAGNETI MARELLI

• Construction Year to: 05.2006
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.03
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Colour: black
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 18.3
• Weight [kg]: 0.046
• Manufacturer: ERA

• Connector Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Housing Colour: green
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Manufacturer: FAE

• Construction Year to: 07.2003
• for RPO number up to: 09729
• Name: DETONATSIOONIANDUR
• Manufacturer: BOS

• Construction Year to: 05.2003
• Number of pins: 2
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• for OE number: 5946 23, 55353316, 003 153 89 28, 6235703
• Manufacturer: MEAT&DORIA

• Height [mm]: 20.3
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

Manufacturer: MAGNETI MARELLI

• Number of connectors: 3
• Supplementary Article/Info 2: for camshaft, without cable
• Required quantity: 1
• Resistor [Ohm]: 35
• Colour: grey
• Sensor Type: Hall Sensor
• Number of pins: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 20
• Colour Coding: black
• Weight [kg]: 0.02
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 05.2006
• Manufacturer: BOSCH

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 20
• Housing Colour: grey
• Weight [kg]: 0.018
• Alternative Repair Kit: 550010
• Manufacturer: ERA

• Alternatively:
• Number of pins: 3
• Pressure from [kPA]: 20
• Pressure to [kPA]: 105
• Weight [kg]: 0.022
• Alternative Repair Kit: 550130
• Manufacturer: ERA

• for RPO number up to: 09729
• Length [mm]: 45
• Thickness [mm]: 18
• Inner Diameter [mm]: 8
• Number of connectors: 2
• Weight [kg]: 0.045
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: RFN (EW10J4)
• Required quantity: 1
• Manufacturer Restriction: SAGEM
• Housing Colour: white
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Number of pins: 3
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• Fitting Depth [mm]: 20
• for article number: 87295E
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Length [mm]: 410
• Fabrication Number: ESL-CT-007
• Manufacturer: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased

• Construction Year to: 05.2006
• Number of pins: 3
• Voltage [V]: 12
• Name: Surveandur,pidurivoimendi
• Manufacturer: MAX

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Engine Code: RFN (EW10J4)
• Required quantity: 1
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Construction Year to: 10.2005
• Engine Code: EW10J4
• Diameter [mm]: 12
• Weight [kg]: 0.02
• Manufacturer: VALEO
• Name: VA 255602

• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Manufacturer Restriction: Citroen, Peugeot, Renault
• Number of pins: 4
• Cable Length [mm]: 200
• Supplementary Article/Supplementary Info: with socket housing
• Supplementary Article/Info 2: with pipe
• Cable cross-section from [mm²]: 0.75
• Cable cross-section to [mm²]: 1.5
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• for OE number: 9639381480
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt,
• Manufacturer: HBE

• Housing Type: with housing
• Fabrication Number: EPP-CT-004
• Manufacturer: NTY

• Lambda Sensor: Regulating Probe, Diagnostic Probe, Heated
• Number of circuits: 4
• Cable Length [mm]: 400
• Thread Size: M18x1,5
• Spanner Size: 22
• for OE number: 1628HR
• Manufacturer: DELLO AUTOMEGA

• Construction Year from: 07.2003
• for RPO number from: 9730
• Number of pins: 2
• Name: DE AS10174
• Manufacturer: DELPHI

• Length [mm]: 54.5
• Number of connectors: 3
• Weight [kg]: 0.02
• Name: SW 62 93 1239
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Supplementary Article/Info 2: without cable

• Required quantity: 1
• Number of pins: 3
• Supplementary Article/Supplementary Info: with gaskets/seals
• Mounting Type: Bolted
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP358152671
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Length [mm]: 54.5
• Number of connectors: 3
• Weight [kg]: 0.02
• Manufacturer: FEBI BILSTEIN
• Additional information: 31239 NRF
• Lisainfo: 31239 NRF

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 05.2006
• Lambda Sensor: Regulating Probe, Diagnostic Probe, Heated
• Block Separation:
• Number of circuits: 4
• Overall Length [mm]: 410
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year to: 05.2006
• Manufacturer: BOSCH

• Engine Code: RFN (EW10J4)
• Number of pins: 3
• Socket colour: grey
• Manufacturer: FAE

• Construction Year to: 07.2003
• for RPO number up to: 9729
• Number of pins: 2
• Manufacturer: DELPHI

• Construction Year to: 10.2005
• Engine Code: EW10J4
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.02
• Manufacturer: VALEO
• Name: VA 366435

• Engine Code: RFN (EW10J4)
• Lambda Sensor: Regulating Probe
• Number of circuits: 4
• Supplementary Article/Info 2: without plug
• Manufacturer: ENERGY

• Lambda Sensor: Regulating Probe, Diagnostic Probe, Planar probe
• Block Separation:
• Number of pins: 4
• Length [mm]: 455
• Manufacturer: TOPRAN

Fitting Position: before catalytic converter, after catalytic converter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Fitting Depth [mm]: 20
• Housing Colour: grey
• Weight [kg]: 0.018
• Manufacturer: ERA

• Block Separation:
• Cable Length [mm]: 370
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Lambda Sensor: Diagnostic Probe, Regulating Probe, Planar probe, Heated

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Construction Year to: 05.2006
• Lambda Sensor: Regulating Probe, Diagnostic Probe, Heated
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year to: 05.2006
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Overall Length [mm]: 410
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Number of pins: 3
• Pressure from [kPA]: 13
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: DLP

• Required quantity: 1
• Number of pins: 5
• Suction pipe connector diameter [mm]: 80
• Quality class: PJ
• Name: Air flow sensor

• Engine Code: RFN (EW10J4)
• Required quantity: 1
• Pressure from [kPA]: 20
• Pressure to [kPA]: 117
• Output Voltage, from [V]: 0.789
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.056
• Manufacturer: EPS

• Engine Code: RFN
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 1,250
• Number of circuits: 4
• Version: ZR PLANAR
• Weight [kg]: 0.181
• Lambda Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY

• Lambda Sensor: Regulating Probe, Heated
• Cable Length [mm]: 300
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Fitting Position: before catalytic converter, after catalytic converter Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 05.2006
• Lambda Sensor: Diagnostic Probe, Heated, Thread pre-greased
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Conductor Number: 4
• Connector Shape: angular
• Thread Size: 18x1,5
• Length [mm]: 400
• Number of circuits: 4
• Version: ZR PLANAR
• Weight [kg]: 0.163
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe, Heated
• Voltage [V]: 12
• Length [mm]: 410
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV671
• Manufacturer: ESEN SKV

Manufacturer: MAGNETI MARELLI

• Length [mm]: 400
• Resistor [Ohm]: 9
• Number of circuits: 4
• Conductor Number: 4
• Cable Length [mm]: 400
• Lambda Sensor: Heated
• Manufacturer: MAGNETI MARELLI

• Number of pins: 3
• Pressure from [kPA]: 10
• Pressure to [kPA]: 115
• Manufacturer: FAE

• Number of connectors: 3
• Colour: black
• Operating Mode: Electric
• Weight [kg]: 0.022
• for OE number: 4574.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

Technical Information: Please compare the connection plug version to precisely identify the parts. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Height [mm]: 20
• Warranty: 5 years warranty
• Manufacturer: HUCO

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Name: OHUMASSIMOOTJA
• Manufacturer: MAX

• Lambda Sensor: Regulating Probe, Diagnostic Probe, Heated
• Block Separation:
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 570
• Weight [kg]: 0.092
• for OE number: 1618.Z6
• Name: SW 33 10 3089
• Manufacturer: SWAG

Fitting Position: before catalytic converter, after catalytic converter General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 05.2006
• Lambda Sensor: Diagnostic Probe, Unheated
• Number of pins: 4
• Cable Length [mm]: 540
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Diagnostic Probe, Regulating Probe, Lambda Sensor
• Voltage [V]: 12
• Length [mm]: 565
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV696
• Manufacturer: ESEN SKV

Exhaust System: after catalytic converter, before catalytic converter

• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 5
• Weight [kg]: 0.22
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV129

• Construction Year from: 12.2002
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Measuring Range from [kPa]: 10
• Measuring Range to [kPa]: 115
• Measuring Range from [V]: 0.4
• Measuring Range to [V]: 4.65
• Number of connectors: 3
• Manufacturer: VERNET

• Lambda Sensor: Planar probe
• Number of pins: 4
• Cable Length [mm]: 1,370
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Construction Year to: 05.2006
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Number of pins: 3
• Sensor Type: Hall Sensor
• Version: OE
• Manufacturer: METZGER

• for OE number: 1618Z6, 55353148
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 550
• Number of pins: 4
• Weight [g]: 99
• Gross Weight [g]: 132
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
106 II (1), 04.96-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
106 II (1), 04.96-
(kvaliteediklass: Q)"