Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
for model code: Jumper 31,
Jumper 35 - Fitting Position: Front Axle
-
Transmission Code: MG5T,
ML5C -
Payload [kg]: 1,
000, 1, 400 - Block Separation:
- Inner Diameter [mm]: 97.8
- Width [mm]: 8.65
- Outer Diameter [mm]: 110
- Number of Teeth, ABS ring: 54
-
Name: ANDUR,
ABS - Manufacturer: TRI
-
Lisainfo: CITROEN,
FIAT, PEUGEOT -
Additional information: CITROEN,
FIAT, PEUGEOT
- Fitting Position: Front Axle both sides
- Width [mm]: 8.1
- Number of Teeth, ABS ring: 54
- Inner Diameter [mm]: 99.9
- Outer Diameter [mm]: 110
- Weight [kg]: 0.073
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Vehicle type: Jumper31,
Jumper35 - Fitting Position: Front Axle
-
Transmission Code: MG5T,
ML5C -
Payload [kg]: 1,
000, 1, 400 - Block Separation:
- Outer Diameter [mm]: 110
- Number of Teeth: 54
- Inner Diameter [mm]: 98
- Width [mm]: 9
-
Name: ANDUR,
ABS - Manufacturer: MAX
-
Vehicle type: Jumper31,
Jumper35 - Fitting Position: Front Axle both sides
- Transmission Type: Manual Transmission
-
Payload [kg]: 1,
400 - Block Separation:
- Outer Diameter [mm]: 110
- Width [mm]: 8.1
- Number of Teeth: 54
- Inner Diameter [mm]: 100
-
Name: ANDUR,
ABS - Manufacturer: MAX
-
Payload [kg]: 1,
000, 1, 400 - Transmission Type: Manual Transmission
- Fitting Position: Front Axle both sides
- Inner Diameter [mm]: 97.8
- Thickness [mm]: 8.65
- Number of Teeth: 54
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Vehicle type: Jumper31,
Jumper35 - Fitting Position: Front Axle both sides
- Transmission Type: Manual Transmission
-
Payload [kg]: 1,
800 - Block Separation:
- Width [mm]: 8
- Number of Teeth: 54
- Outer Diameter [mm]: 122
- Inner Diameter [mm]: 115
-
Name: ANDUR,
ABS - Manufacturer: MAX
-
Vehicle type: Jumper31,
Jumper35 - Fitting Position: Front Axle
- Transmission Type: Manual Transmission
-
Transmission Code: MG5T,
ML5C -
Payload [kg]: 1,
800 - Block Separation:
- Inner Diameter [mm]: 112
- Width [mm]: 8.2
- Outer Diameter [mm]: 122
- Number of Teeth: 54
-
Name: ANDUR,
ABS - Manufacturer: MAX
-
for model code: Jumper 31,
Jumper 35 - Fitting Position: Front Axle both sides
- Transmission Type: Manual Transmission
-
Payload [kg]: 1,
800 - Block Separation:
- Inner Diameter [mm]: 114.8
- Width [mm]: 8
- Outer Diameter [mm]: 121.75
- Number of Teeth, ABS ring: 54
-
Name: ANDUR,
ABS - Manufacturer: TRI
-
Vehicle type: Jumper31,
Jumper35 - Fitting Position: Front Axle both sides
- Transmission Type: Manual Transmission
-
Payload [kg]: 1,
800 - Block Separation:
- Width [mm]: 8
- Outer Diameter [mm]: 121
- Number of Teeth: 54
- Inner Diameter [mm]: 113
-
Name: ANDUR,
ABS - Manufacturer: MAX
-
Vehicle type: Jumper31,
Jumper35 - Fitting Position: Front Axle both sides
- Transmission Type: Manual Transmission
-
Payload [kg]: 1,
000, 1, 400 - Block Separation:
- Width [mm]: 8.2
- Outer Diameter [mm]: 110
- Number of Teeth: 54
- Inner Diameter [mm]: 95
-
Name: ANDUR,
ABS - Manufacturer: MAX
-
for model code: Jumper 31,
Jumper 35 - Fitting Position: Front Axle both sides
- Transmission Type: Manual Transmission
-
Payload [kg]: 1,
800 - Block Separation:
- Inner Diameter [mm]: 113.2
- Width [mm]: 8
- Outer Diameter [mm]: 121
- Number of Teeth, ABS ring: 54
-
Name: ANDUR,
ABS - Manufacturer: TRI
-
Lisainfo: CITROEN,
FIAT, PEUGEOT -
Additional information: CITROEN,
FIAT, PEUGEOT
-
for model code: Jumper 31,
Jumper 35 - Fitting Position: Front Axle both sides
- Transmission Type: Manual Transmission
-
Payload [kg]: 1,
400 - Block Separation:
- Inner Diameter [mm]: 99.9
- Width [mm]: 8.1
- Outer Diameter [mm]: 110
- Number of Teeth, ABS ring: 54
-
Name: ANDUR,
ABS - Manufacturer: TRI
-
Lisainfo: CITROEN,
FIAT, PEUGEOT -
Additional information: CITROEN,
FIAT, PEUGEOT
-
Fitting Position: Front Axle Left,
Front Axle Right -
Cable Length [mm]: 1,
400 - Number of pins: 2
- Fitting Depth [mm]: 28
- Warranty: 3 years warranty
- Name: CE 06SKV431
- Manufacturer: ESEN SKV
- Construction Year from: 05.2000
- Sensor Type: Passive sensor
- Required quantity: 2
-
Cable Length [mm]: 1,
340 - Number of pins: 2
- Fitting Position: Front Axle
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MAX
- Fitting Position: Front Axle
- Transmission Type: Manual Transmission
- Vehicle Identification Number (VIN) from: 5235558
- Width [mm]: 8.3
- Inner Diameter [mm]: 112
- Outer Diameter [mm]: 122
- Number of Teeth, ABS ring: 54
- Net weight [kg]: 0.07
-
Name: ANDUR,
ABS - Manufacturer: NK
-
paired article number: HCA-
FT- 011 -
Cable Length [mm]: 2,
260 - Sensor Type: Passive sensor
- Fitting Position: Rear Axle Right
-
Fabrication Number: HCA-
FT- 012 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
paired article number: HCA-
FT- 012 -
Cable Length [mm]: 1,
495 - Sensor Type: Passive sensor
- Fitting Position: Rear Axle Left
-
Fabrication Number: HCA-
FT- 011
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Rear Axle Right
-
Cable Length [mm]: 2,
260 - paired article number: 06SKV429
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Fitting Position: Rear Axle Left
-
Cable Length [mm]: 1,
495 - paired article number: 06SKV430
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
-
Fitting Position: Front Axle both sides,
Front Axle - Transmission Type: Manual Transmission
-
Payload [kg]: 1,
000, 1, 400 - Number of Teeth: 54
- Outer Diameter [mm]: 110
- Inner Diameter [mm]: 98
- Width [mm]: 8.7
- Manufacturer: METZGER
- Construction Year from: 05.2000
-
Fitting Position: Front Axle Right,
Front Axle Left, Front Axle -
Length [mm]: 1,
400 - Braking/Drive Dynamics: for vehicles with ABS
- Rated Voltage [V]: 12
- Required quantity: 2
-
Resistor [Ohm]: 1,
650 -
Cable Length [mm]: 1,
355 -
Sensor Type: Inductive Sensor,
Passive sensor - Number of pins: 2
- Fitting Depth [mm]: 28
- Supplementary Article/Info 2: with cable
- Weight [kg]: 0.132
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle Left
- Sensor Type: Passive sensor
- Number of occupied pins: 2
-
Cable Length [mm]: 1,
495 - Name: DE SS20074
- Manufacturer: DELPHI
- Fitting Position: Front Axle
- Construction Year from: 05.2000
- Sensor Type: Passive sensor
- Number of occupied pins: 2
-
Cable Length [mm]: 1,
409 -
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: DLP
- Quality class: PJ
-
Fitting Position: Right,
Front Axle -
Cable Length [mm]: 1,
425 -
Manufacturer: SNR /
NTN- SNR/ - Name: SN ASB159.31
- Brake System: Bosch
- Sensor Type: Inductive Sensor
-
Cable Length [mm]: 1,
425 - Fitting Position: Front Axle
- Number of pins: 2
- Manufacturer: FAE
-
for model code: Jumper 31,
Jumper 35 - Fitting Position: Rear Axle Right
- Block Separation:
-
Cable Length [mm]: 2,
205 - Fitting Depth [mm]: 55.9
- Number of pins: 2
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: TRI
- Fitting Position: Rear Axle Right
- Sensor Type: Passive sensor
- Number of occupied pins: 2
-
Cable Length [mm]: 2,
260 - Manufacturer: DELPHI
- Construction Year from: 05.2000
- Sensor Type: Passive sensor
-
Cable Length [mm]: 1,
340 - Number of pins: 2
- Fitting Position: Front Axle
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MEY
-
Fitting Position: Rear Axle,
Rear Axle Left -
paired article number: GH-
712312H -
Manufacturer: AUTO-
GH
-
Fitting Position: Rear Axle,
Rear Axle Right -
paired article number: GH-
712312V -
Manufacturer: AUTO-
GH
- Fitting Position: Front Axle
- Construction Year from: 05.2000
- Sensor Type: Inductive Sensor
- Number of pins: 2
- Manufacturer: METZGER
-
Length [mm]: 2,
230 - Sensor Type: Passive sensor
- Fitting Position: Rear Axle Right
- Manufacturer: FAST
- Fitting Position: Front Axle
- Construction Year from: 05.2000
-
Cable Length [mm]: 1,
360 - Sensor Type: Passive sensor
- Manufacturer: OPTIMAL ZAWIESZENIE
-
Length [mm]: 1,
450 - Sensor Type: Passive sensor
- Fitting Position: Rear Axle Left
- Manufacturer: FAST
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks