• Fabrication Number: ECT-CT-004
• Manufacturer: NTY

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 2
• for OE number: 13627535068
• Supplementary Article/Info 2: with mounting parts
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Thread Size: 20 mm
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Version: 2
• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: not have
• Thread Size: not have

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Fabrication Number: ESS-BM-002

Fabrication Number: ECT-CT-006

• Fabrication Number: ECP-CT-011
• Manufacturer: NTY

• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Length [mm]: 19
• Sensor Type: Active sensor
• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-PE-013
• Manufacturer: NTY

• Mounting Type: Plugged
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with seal
• Colour: green
• Sensor Type: NTC Sensor
• Number of pins: 2
• Supplementary Article/Info 2: with retaining ring
• Corresponds to the original part in colour: brown, green
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009309221

SVHC: 1317-36-8; Lead monoxide (lead oxide), 7439-92-1; Lead, 1303-86-2; Diboron trioxide Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: Active sensor
• Manufacturer: KAMOKA

• Sensor Type: NTC Sensor
• Number of pins: 2
• Manufacturer: ERA

• Construction Year to: 12.2019
• Manufacturer: BOSCH
• Name: BS 0261231197

• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 820
• Weight [kg]: 0.059
• Number of connectors: 2
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 06SKV427

• Engine Code: 5GZ (EP6FDT)
• Required quantity: 1
• Name: EP 1.957.165
• Manufacturer: EPS

• Vehicle Equipment: for vehicles without autom. distance control
• Fitting Position: Rear Axle Left, Rear Axle Right
• Colour: black
• Number of pins: 2
• Braking/Drive Dynamics: for vehicles with ABS
• Always compare old and new part (in particular OE No.):
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Alternatively:
• Number of pins: 3
• Connector Shape: oval
• Manufacturer: ERA

• Length [mm]: 875
• Sensor Type: Active sensor
• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-PE-012
• Manufacturer: NTY

• Construction Year to: 12.2019
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Voltage [V]: 12
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Version: 1
• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: not have
• Thread Size: not have

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Fabrication Number: ECC-CT-000
• Manufacturer: NTY

• Transmission Type: Automatic Transmission
• Transmission ID: AT6 3
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Quantity: 1
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Engine Code: 5GZ (EP6FDT)
• Name: EP 1.953.789
• Manufacturer: EPS

• Transmission Type: Automatic Transmission
• Transmission ID: AT6 3
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Number of pins: 3
• Operating Mode: Hydraulic
• Supplementary Article/Info 2: with seal ring
• Connector Shape: oval
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Overall Length [mm]: 565
• Number of circuits: 4
• Fabrication Number: ESL-CT-011
• Manufacturer: NTY

Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased Fitting Position: before catalytic converter, after catalytic converter

• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA BMW 1 F20 1,6 15-
• Manufacturer: BRM

• Vehicle Equipment: for vehicles with parking distance control
• Braking/Drive Dynamics: for vehicles without Adaptive Cruise Control
• Required quantity: 2
• Fitting Position: Rear Axle
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Manufacturer: BREMI

• Construction Year to: 12.2019
• Manufacturer: BOSCH
• Name: BS 0261230252

• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable, with seal ring
• Assy./disassy. by qualified personnel required!:
• Name: Andur,Nukkvollipositsioon
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 12.2019
• Manufacturer: BOSCH

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles with parking distance control
• Quantity: 2
• Braking/Drive Dynamics: for vehicles without Adaptive Cruise Control
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Name: DE SS20760
• Manufacturer: DELPHI

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MEY

• Construction Year to: 12.2019
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: BOS

• Construction Year to: 12.2019
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.013
• for OE number: 98 000 384 80
• Name: Andur, rattap””rete arv
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. BMW 1 F20 07-
• Manufacturer: BRM

• Vehicle Equipment: for vehicles without parking assistant system
• Sensor Type: Active sensor
• Number of pins: 2
• Fitting Position: Rear Axle
• Name: Andur, rattap””rete arv
• Manufacturer: MEY

• Fitting Position: inner, Left, Right, Front, Rear, Centre, outer
• Quantity: 4
• Block Separation:
• Name: Sensor, parkimisabi
• Manufacturer: TRI

Vehicle Equipment: for vehicles with semi-automatic parking assistant system

• Construction Year to: 12.2019
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 20
• Alternative Repair Kit: 550698
• Manufacturer: ERA

• Engine Code: 5GZ (EP6FDT)
• Thread Size: M12x1,5
• Spanner Size: 24
• Name: EP 1.980.001
• Manufacturer: EPS

• Engine Code: 5GZ (EP6FDT)
• Thread Size: M12 x 1,5
• Name: Rongastihend,klapis„„r
• Manufacturer: MAX

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6
• for OE number: 9810048680

• Required quantity: 4
• Fitting Position: both sides, inner, Front, Rear
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: mounting
• Socket colour: black
• Assy./disassy. by qualified personnel required!:
• Sensor Type: Ultrasonic Sensor
• Name: HE 6PX358270351
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: NTC Sensor
• Number of pins: 2
• Number of connectors: 2
• Connector Shape: oval
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.014
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Required quantity: 2
• Vehicle Equipment: for vehicles without parking assistant system
• Number of pins: 2
• Manufacturer: METZGER

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fitting Position: before catalytic converter
• Connector Shape: angular
• Length [mm]: 570
• Thread Size: M18 x 1,5
• Number of pins: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Length [mm]: 480
• Cable Length [mm]: 365
• Number of pins: 4
• Connector Shape: angular
• Manufacturer: METZGER

• Engine Code: 5GZ (EP6FDT)
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: 5GZ (EP6FDT)
• Fitting Position: after catalytic converter
• Required quantity: 1
• Cable Length [mm]: 450
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.240
• Number of circuits: 4
• Name: EP 1.998.206
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Engine Code: 5GZ (EP6FDT)
• Fitting Position: before catalytic converter
• Required quantity: 1
• Length [mm]: 565
• Cable Length [mm]: 570
• Conductor Number: 4
• Supplementary Article/Info 2: with fastening material
• Available as universal article as well, see article no.: 1.998.240
• Number of circuits: 4
• Name: EP 1.998.246
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased

• Fitting Position: Front, Rear
• for OE number: 1608321780, 1608472280, 1609981080
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of connectors: 3
• Chemical Properties: Paintable
• Weight [kg]: 0.014
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 12.2019
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 565
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 12.2019
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 475
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH
• Name: BS 0258010363

• Engine Code: EP6FDT
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 450
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.13
• Manufacturer: VALEO
• Name: VA 368220

Fitting Position: before catalytic converter, after catalytic converter

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: brown
• for OE number: 9810048680
• Supplementary Article/Info 2: with mounting parts