Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: on transmission housing,
Oil Sump -
Transmission Type: 6-
Speed Manual Transmission -
Transmission ID: MC,
ML6C -
for DAM number from: 14299U9,
14875YT, 14872YT - Block Separation:
- Quantity per packing unit: 10
- Material: Copper
- Outer Diameter [mm]: 22
- Inner Diameter [mm]: 16
- Thickness [mm]: 2
- Shape: C Shape
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Thickness [mm]: 2
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 22
- Material: Copper
- Weight [kg]: 0.001
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission ID: MC,
ML6C -
for RPO number from: 14329,
14875 - Fitting Position: on transmission housing
-
Transmission Type: 6-
Speed Manual Transmission - Quantity per packing unit: 25
- Thickness [mm]: 2
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 22
- Weight [kg]: 0.033
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity per packing unit: 25
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 21
- Thickness [mm]: 2.1
- Material: Copper
- Shape: A Shape
- Alternative Repair Kit: 505.540
- Manufacturer: ELRING
- Lisainfo: 108.502 ELR
- Additional information: 108.502 ELR
- Quantity per packing unit: 25
- Thickness [mm]: 2
- Inner Diameter [mm]: 10.2
- Outer Diameter [mm]: 20
- Material: Copper
- Weight [kg]: 0.001
- Fitting Position: Oil Sump
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: BHX
(DV6FCU) -
Name: RONGASTIHEND,
OLI RAVOOLUKRUVI - Manufacturer: AJU
- for RPO number up to: 14299
- Material: Steel
- Length [mm]: 17
- Spanner Size: 21
- Bolt Head-/Nut Design: Male Hex
- for OE number: 1146063
- Manufacturer: DELLO AUTOMEGA
- Quantity per packing unit: 6
- Weight [kg]: 0.02
-
Thread Size: M10x1,
25 - Weight [g]: 20
- Manufacturer: METALCAUCHO
-
Thread Size: M10 x 1,
25 - Weight [kg]: 0.02
- Bolt Head-/Nut Design: Male Hex
- Spanner Size: 21
- Manufacturer: 3RG
- Fitting Position: on transmission housing
-
for DAM number from: 14299U9,
14875YT - Block Separation:
-
Transmission Type: 6-
Speed Manual Transmission - Transmission ID: ML6C
- Quantity per packing unit: 5
- Bolt Head-/Nut Design: Inner rectangle
- Thread Size: M 16
- Thread Pitch [mm]: 1.5
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- for RPO number up to: 14299
- Length [mm]: 17
-
External Thread Size: M10 x 1,
25 - Thread Length [mm]: 13
- Quality/ Grade: 8.8
- Spanner Size: 21
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 13
- Weight [kg]: 0.15
- Supplementary Article/Info 2: without seal ring
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for RPO number up to: 14299
- Length [mm]: 13
-
External Thread Size: M10 x 1,
25 - Thread Length [mm]: 13
- Quality/ Grade: 8.8
- Spanner Size: 21
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 13
- Weight [kg]: 0.15
- Supplementary Article/Info 2: without seal ring
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for RPO number up to: 14299
- Length [mm]: 17
-
External Thread Size: M10 x 1,
25 - Thread Length [mm]: 13
- Quality/ Grade: 8.8
- Spanner Size: 21
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 13
- Weight [kg]: 0.15
- Supplementary Article/Info 2: without seal ring
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Thread Size: M10x1,
25x13 - Spanner Size: 21 mm
- Bolt Head-/Nut Design: Male Hex
- Supplementary Article/Info 2: with seal ring
- Manufacturer: DR.MOTOR AUTOMOTIVE
-
Thread Size: M10x1,
25 - Length [mm]: 13
- Supplementary Article/Info 2: with seal ring
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FIS
- for RPO number up to: 14299
- Length [mm]: 17
-
External Thread Size: M10 x 1,
25 - Thread Length [mm]: 10
- Quality/ Grade: 8.8
- Spanner Size: 21
- Bolt Head-/Nut Design: Male Hex
- Screw length below head [mm]: 11
- Seal Diameter [mm]: 20.4
- Weight [kg]: 0.2
- Supplementary Article/Info 2: with seal ring
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for DAM number from: 14872YT
- Quantity per packing unit: 10
- Thread Size: M 16
- Thread Pitch [mm]: 1.5
- Thread Length [mm]: 15
-
Name: Sulgurkruvi,
olivann - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- for RPO number up to: 14299
- Length [mm]: 17
-
External Thread Size: M10 x 1,
25 - Thread Length [mm]: 13
- Quality/ Grade: 8.8
- Spanner Size: 21
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 13
- Weight [kg]: 0.15
- for OE number: 0311.29
- Manufacturer: ENERGY
-
Thread Size: M10x1,
25 - Length [mm]: 13
- Additionally required articles (article numbers): 746.520.100
- Manufacturer: FA1 FISCHER
- for RPO number up to: 14299
- Length [mm]: 17
-
External Thread Size: M10 x 1,
25 - Thread Length [mm]: 10
- Quality/ Grade: 8.8
- Spanner Size: 21
- Bolt Head-/Nut Design: Male Hex
- Screw length below head [mm]: 11
- Seal Diameter [mm]: 20
- Weight [kg]: 0.02
- Supplementary Article/Info 2: with seal ring
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: BLP
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Thread Size: M10x1,
25x13 - Bolt Head-/Nut Design: Male Hex
- Spanner Size: 21 mm
- Alternative Repair Kit: 877.930
- Supplementary Article/Info 2: without seal ring
- Manufacturer: ELRING
-
Thread Size: M10x1,
25x13 - Bolt Head-/Nut Design: Male Hex
- Spanner Size: 21 mm
- Supplementary Article/Info 2: with seal ring
- Manufacturer: ELRING
- Length [mm]: 18
-
Thread Size: M 10 x 1,
25 x 12, 5 - Spanner Size: 21
- Supplementary Article/Info 2: with seal ring
- Packing Type: Blister Pack
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: COT
- for RPO number from: 14872
- Quantity per packing unit: 5
-
Surface: Zinc-
coated - Thread Length [mm]: 17
- Supplementary Article/Info 2: with seal ring
- Thread Size: M16
- Spanner Size: 21
- Required quantity: 1
- Bolt Head-/Nut Design: Hexagon Socket
- Thread Pitch [mm]: 1.5
- Fitting Position: Oil Sump
- Weight [kg]: 0.031
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Material: Steel
-
Thread Size: M16x1,
5 - Length [mm]: 20
- Screw length below head [mm]: 17
- Bolt Head-/Nut Design: Hexagon Socket
- Spanner Size: 8
- Seal Material: Copper
- Shape: C Shape
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 22
- Thickness [mm]: 2
- Packing Type: Bag
- Supplementary Article/Info 2: with seal ring
- Manufacturer: METZGER
- Quantity per packing unit: 10
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Shape: A Shape
- Material: Copper
- Alternatively:
- Quantity per packing unit: 10
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 21
- Thickness [mm]: 2
- Shape: A Shape
- Material: Copper
- Alternatively:
- Quantity per packing unit: 100
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Shape: A Shape
- Material: Copper
- Manufacturer: FA1 FISCHER
- Quantity per packing unit: 100
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 21
- Thickness [mm]: 2
- Shape: A Shape
- Material: Copper
- Manufacturer: FIS
Name: PODKADKA,USZCZELKA MIEDZIANA CU 10,00 X 21,00 X 2,00 (OPAKOWANIE 100 SZT.)
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks