Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)



- Number of pins: 2
- Manufacturer: JP GROUP
-
Lisainfo: Sender Unit,
coolant temperature -
Additional information: Sender Unit,
coolant temperature



-
Engine Code: RFN
(EW10J4) - Pressure [bar]: 0.5
- Housing Colour: grey
- Manufacturer: JP GROUP
- Lisainfo: Oil Pressure Switch
- Additional information: Oil Pressure Switch








-
for OE number: 1628HR,
9635978280 -
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 400
- Number of pins: 4
- Weight [g]: 113
- Gross Weight [g]: 146
- Manufacturer: DENSO
-
Name: DN DOX-
2001
Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor
Additional information: "Tootja: DENSO
306 (7B, N3, N5), 04
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
306 (7B, N3, N5), 04
(kvaliteediklass: Q)"


- Thread Size: M 16
- Number of pins: 1
- Supplementary Article/Info 2: with seal ring
- Connector Shape: rectangular
- Manufacturer: DELLO AUTOMEGA






























-
Engine Code: RFN
(EW10J4) - for OE number: OErefnolongersup
- Pressure [bar]: 0.5
- Spanner Size: 24
- Number of pins: 1
- Manufacturer: KAVO



-
Engine Code: RFN
(EW10J4) - Pressure [bar]: 0.5
- Thread Size: M16 x 1.5
- Spanner Size: 22
- Number of pins: 1
- Manufacturer: KAVO





- for OE number: 1338A7
- Spanner Size: 19
- Housing Colour: green
- Manufacturer: KAMOKA





-
Fabrication Number: ECT-
CT- 001 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.





-
Fabrication Number: ECC-
CT- 001 -
Thread Size: M16x1,
5 - Pressure [bar]: 0.5
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.


-
Engine Code: RFN
(EW10J4) - Colour: black
- Pressure [bar]: 0.5
-
Thread Size: M16x1,
5 - Spanner Size: 21
- Name: OLISURVELLITUS
- Manufacturer: EPS


- Spanner Size: 19
- Colour: green
- Number of pins: 2
-
Thread Size: M12 x 1,
5, M12x1, 5 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX


- Number of connectors: 1
- Manufacturer: JPN


-
Thread Size: M 16x1,
5 - Housing Colour: grey
- Pressure [bar]: 0.5
- Manufacturer: FAE


- Pressure [bar]: 5
- Housing Colour: grey
-
Thread Size: M16x1.5-
6g - Diameter [mm]: 21
- Spanner Size: 21
- Number of pins: 1
- Name: OLISURVELLITUS
- Manufacturer: DLP
- Quality class: PJ
Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"













































- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Connector Shape: rectangular
- Number of pins: 2
- Spanner Size: 19
- Thread Size: M12x1.5
- for OE number: 9628454680
- Supplementary Article/Info 2: with seal ring
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF


- Spanner Size: 22
- Colour: grey
- Number of pins: 1
- Pressure [bar]: 0.5
- Name: OLISURVELLITUS
- Manufacturer: MAX


- Pressure [bar]: 5
- Housing Colour: grey
-
Thread Size: M16x1.5-
6g - Diameter [mm]: 22
- Spanner Size: 22
- Number of pins: 1
- Name: OLISURVELLITUS
- Manufacturer: DLP


- Housing Type: Aluminium Housing
- Thread Size: M12x1.5
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: VER


-
Engine Code: RFN
(EW10J4) - Colour: grey
- Pressure [bar]: 0.5
-
Thread Size: M16x1,
5 - Spanner Size: 21
- Corresponds to the original part in colour: brown
- Manufacturer: FACET


-
Engine Code: RFN
(EW10J4) - Colour: grey
- Pressure [bar]: 0.5
-
Thread Size: M16x1,
5 - Spanner Size: 21
- Corresponds to the original part in colour: brown
- Name: OLISURVELLITUS
- Manufacturer: EPS


- Switch Pressure [bar]: 0.5
- Thread Size: M16x1.5
-
Sensor Type: Closed-
type Sensor - Manufacturer: VERNET


- Spanner Size: 19
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FAST


- Switch Pressure [bar]: 0.5
- Thread Size: M16x1.5
-
Sensor Type: Closed-
type Sensor - Name: OLISURVELLITUS
- Manufacturer: VER


- Spanner Size: 22
- Number of connectors: 1
- Colour: grey
- Shifting Points [bar]: 0.5
- Screw length below head [mm]: 13
- Weight [kg]: 0.045
- Supplementary Article/Info 2: with seal ring
- Name: OLISURVELLITUS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.




- Number of pins: 2
-
Name: ANDUR,
SISENDOHU TEMPERATUUR - Manufacturer: MAX




- Number of connectors: 1
- Weight [kg]: 0.046
- Supplementary Article/Info 2: with seal ring
- Manufacturer: BLUEPRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


-
Engine Code: RFN
(EW10J4) -
Corresponds to the original part in colour: brown,
green -
Name: ANDUR,
SISENDOHU TEMPERATUUR - Manufacturer: EPS
-
Additional information: 1-
994- 005 -
Lisainfo: 1-
994- 005





-
Fabrication Number: ECP-
CT- 019 - Number of pins: 2
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.


-
Engine Code: RFN
(EW10J4) - Sensor Type: NTC Sensor
- Voltage [V]: 12
- Number of pins: 2
- Housing Colour: grey
- Manufacturer: FAE






























































-
Thread Size: M16 x 1,
5 - Switch Pressure [bar]: 0.5
- Weight [kg]: 0.047
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.







- Connector Shape: rectangular
- Material: Plastic
- Number of pins: 2
- Plug Type: Female
- Sensor Type: NTC Sensor
- Spanner Size: S19
-
Thread Size: M12*1,
5 - Name: NI 207087
- Manufacturer: NISSENS
Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.





-
Fabrication Number: ECP-
CT- 005 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.





- for OE number: 9632400580
- Sensor Type: Passive sensor
- Manufacturer: KAMOKA



- Sensor Type: Inductive Sensor
- Number of pins: 2
- Housing Colour: black
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.


- Manufacturer: VERNET
- Additional information: AS0006 VERNET
- Lisainfo: AS0006 VERNET


- Sensor Type: Inductive Sensor
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.




- Number of connectors: 2
- Weight [kg]: 0.01
-
Name: ANDUR,
SISENDOHU TEMPERATUUR - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Number of pins: 2
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [kg]: 0.3
- Packaging length [cm]: 12
- Packaging width [cm]: 8
- Packaging height [cm]: 6


- Housing Colour: green
- Number of pins: 2
-
Thread Size: M12X1.5-
6g - Spanner Size: 19
- Manufacturer: DELPHI
-
Name: DE TS10218-
12B1




- Number of connectors: 2
- Weight [kg]: 0.007
- Manufacturer: BLUE PRINT ELEKTRYKA
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Mounting Type: Bolted
- Voltage [V]: 12
-
Resistor [Ohm]: 5,
000, 600 -
Supplementary Article/Supplementary Info: with gasket/
seal - Temperature range from [°C]: 25
- Temperature range to [°C]: 80
-
Thread Size: M12x1,
5 - Colour: green
- Spanner Size: 19
- Sensor Type: NTC Sensor
- Number of pins: 2
- Colour Coding: yellow
- Assy./disassy. by qualified personnel required!:
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.


- Construction Year from: 04.2000
- Number of pins: 2
- Manufacturer: DELLO AUTOMEGA


- Height [mm]: 24
- Resistor [Ohm]: 400
- Number of connectors: 2
- Manufacturer: VERNET


-
External Thread Size: M12 x 1,
5 - Spanner Size: 19
- Number of connectors: 2
- Colour: green
- Weight [kg]: 0.03
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






- Supplementary Article/Info 2: without cable
- Housing Colour: white
-
Transmission Type: Manual Transmission,
Automatic Transmission -
Fabrication Number: ESS-
PE- 000 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.


-
Engine Code: RFN
(EW10J4) - Colour: green
-
Thread Size: M12x1,
5 - Spanner Size: 19
- Manufacturer: FACET


-
Engine Code: RFN
(EW10J4) - Colour: green
-
Thread Size: M12x1,
5 - Spanner Size: 19
- Manufacturer: FACET
- Name: EP 1.830.276




- Construction Year from: 04.2000
- Construction Year to: 12.2000
- Voltage [V]: 12
- Supplementary Article/Supplementary Info: without cable pull
- Number of pins: 2
- Guarantee: 3 years guarantee
- Weight [kg]: 0.04
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: ESEN SKV




















































-
Thread Size: M12 x 1,
5 - Spanner Size: 19
-
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 2
- Weight [kg]: 0.035
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.





























































- for RPO number up to: 08789
- Required quantity: 1
- Resistor [Ohm]: 390
- Colour: black
- Sensor Type: Inductive Sensor
- Number of pins: 2
- Number of connectors: 2
- Rated Voltage [V]: 12
- Fitting Depth [mm]: 24
- Supplementary Article/Info 2: without cable
- Weight [kg]: 0.041
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.



-
Engine Code: RFN
(EW10J4) - Sensor Type: NTC Sensor
-
Thread Size: M12 x 1,
5 - Spanner Size: 19
- Supplementary Article/Info 2: with seal ring
- Colour: green
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MEY


-
External Thread Size: M12 x 1,
5 - Spanner Size: 19
- Number of connectors: 2
- Colour: green
- Weight [kg]: 0.03
- Supplementary Article/Info 2: with seal ring
- Name: SW 62 92 6318
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






-
Fabrication Number: ECP-
CT- 024 - Sensor Type: Hall Sensor
- Number of pins: 3
- Supplementary Article/Info 2: without cable
- Connector Shape: rectangular
- Manufacturer: NTY


- for RPO number up to: 08789
- Length [mm]: 24
- Number of connectors: 2
- Weight [kg]: 0.02
- for OE number: 1920.7N
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Required quantity: 1
- Construction Year to: 12.2000
- Number of pins: 2
- Sensor Type: Inductive Sensor
- Supplementary Article/Info 2: without cable
- Housing Colour: black
- Manufacturer: BREMI


- Construction Year to: 12.2000
- Number of pins: 2
-
Name: ANDUR,
VNTVOLL - Manufacturer: DLP


- for RPO number from: 08790
- Length [mm]: 24
- Number of connectors: 2
- Weight [kg]: 0.03
- for OE number: 1920.9C
- Name: SW 62 93 1245
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Height [mm]: 24
- Resistor [Ohm]: 400
- Number of connectors: 2
- Manufacturer: VERNET


- for RPO number up to: 08789
- Length [mm]: 24
- Number of connectors: 2
- Weight [kg]: 0.02
- for OE number: 1920.7N
- Name: SW 62 92 6335
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Construction Year to: 12.2000
- Manufacturer: NRF



- Construction Year to: 12.2000
- Number of pins: 2
- Fitting Depth [mm]: 24.2
-
Name: ANDUR,
VNTVOLL - Manufacturer: TRI


- Construction Year from: 01.2001
- Number of pins: 2
-
Name: ANDUR,
VNTVOLL - Manufacturer: DLP


- Number of pins: 2
-
for manufacturer number: 6PT 009 109-
221 - Assy./disassy. by qualified personnel required!:
- Name: HE 6PT009109221
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.


- Construction Year from: 04.2000
- Number of pins: 2
- Connector Shape: rectangular
- Supplementary Article/Info 2: without cable
- for OE number: 594621
- Manufacturer: MEAT&DORIA


-
Engine Code: RFN
(EW10J4) - Construction Year from: 01.2001
- Name: EP 1.953.258
- Manufacturer: EPS


- Construction Year to: 12.2000
- Voltage [V]: 12
- Resistor [Ohm]: 475
- Tolerance [%]: 10
- Sensor Type: Inductive Sensor
- Number of pins: 2
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Name: HE 6PU009146421
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.





- Colour: black
- Alternatively:
- Number of pins: 2
- Fitting Depth [mm]: 18.3
- Weight [kg]: 0.046
- Manufacturer: ERA


-
Engine Code: RFN
(EW10J4) - Construction Year to: 12.2000
- Manufacturer Restriction: SIEMENS
- Manufacturer: FACET
- Name: EP 1.953.260





- Resistor [Ohm]: 380
- Colour: black
- Alternatively:
- Number of pins: 2
- Fitting Depth [mm]: 24
- Weight [kg]: 0.028
- Manufacturer: ERA


-
Engine Code: RFN
(EW10J4) - Construction Year to: 12.2000
- Manufacturer Restriction: SIEMENS
- Manufacturer: FACET




- Sensor Type: Inductive Sensor
- Number of pins: 2
- Voltage [V]: 12
- Connector Shape: angled
- Supplementary Article/Info 2: without cable
- Resistor [Ohm]: 400
- Manufacturer: VALEO

- VET Number to: 08789
- Number of pins: 2
- Manufacturer: VDO




- Construction Year from: 01.2004
- Engine Code: EW10J4
- Sensor Type: Inductive Sensor
- Number of pins: 2
- Voltage [V]: 12
- Connector Shape: angled
- Supplementary Article/Info 2: without cable
- Resistor [Ohm]: 400
- Manufacturer: VALEO
- Name: VA 254049






























- Construction Year from: 04.2000
- Construction Year to: 12.2000
- for RPO number up to: 8789
-
Name: ANDUR,
VNTVOLL - Manufacturer: BOS






























- Construction Year from: 01.2001
- for RPO number from: 8790
-
Name: ANDUR,
VNTVOLL - Manufacturer: BOS


- VET Number to: 08789
- Number of pins: 2
- Manufacturer: FAE


- Number of pins: 2
- Connector Shape: rectangular
- Supplementary Article/Info 2: without cable
- for OE number: 594623
- Manufacturer: MEAT&DORIA





- Resistor [Ohm]: 380
- Colour: black
- Number of pins: 2
- Fitting Depth [mm]: 24
- Weight [kg]: 0.028
- Manufacturer: ERA


- for RPO number from: 8790
- Supplementary Article/Info 2: without cable
- Manufacturer: FAE


- Height [mm]: 20.3
- Sensor Type: Hall Sensor
- Number of connectors: 3
- Manufacturer: VERNET


Manufacturer: MAGNETI MARELLI




-
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased -
Fabrication Number: ESL-
SK- 000 - Manufacturer: NTY
-
Name: NTY ESL-
SK- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.





























- Construction Year from: 04.2000
- Name: DETONATSIOONIANDUR
- Manufacturer: BOS





- Alternatively:
- Number of pins: 3
- Fitting Depth [mm]: 20
- Housing Colour: grey
- Weight [kg]: 0.018
- Alternative Repair Kit: 550010
- Manufacturer: ERA





























- Construction Year from: 04.2000
- Manufacturer: BOSCH




- Length [mm]: 410
-
Fabrication Number: ESL-
CT- 007 - Manufacturer: NTY
-
Name: NTY ESL-
CT- 007
Fitting Position: Front, before catalytic converter, after catalytic converter Oxygen Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.


-
Engine Code: RFN
(EW10J4) - Manufacturer Restriction: SAGEM
- Housing Colour: white
- Manufacturer: FACET


-
Engine Code: RFN
(EW10J4) - Manufacturer Restriction: SAGEM
- Housing Colour: white
- Name: DETONATSIOONIANDUR
- Manufacturer: EPS



- Length [mm]: 45
- Thickness [mm]: 18
- Inner Diameter [mm]: 8
- Number of connectors: 2
- Weight [kg]: 0.045
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Number of pins: 3
- Connector Shape: rectangular
- Supplementary Article/Info 2: without cable
- Sensor Type: Hall Sensor
- Fitting Depth [mm]: 20
- Quality: OE EQUIVALENT
- for OE number: 000019208W
- Manufacturer: MEAT&DORIA


-
Engine Code: RFN
(EW10J4) - Manufacturer: FACET


-
Engine Code: RFN
(EW10J4) -
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: EPS





- Oxygen Sensor: Regulating Probe
- Number of circuits: 4
- Manufacturer: KAMOKA


- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Housing Colour: black
- Manufacturer: FAE


- Voltage [V]: 12
- Number of pins: 3
- Rotation Direction: Clockwise rotation
- Number of mounting bores: 2
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PX008476771
Brief Information: *** HELLA Electronics OE competence for over 60 years.


- Number of pins: 3
- Socket colour: grey
- Manufacturer: FAE


- Length [mm]: 54.5
- Number of connectors: 3
- Weight [kg]: 0.02
- Manufacturer: FEBI BILSTEIN
- Additional information: 31239 NRF
- Lisainfo: 31239 NRF
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


Manufacturer: MAGNETI MARELLI


- Length [mm]: 54.5
- Number of connectors: 3
- Weight [kg]: 0.02
- Name: SW 62 93 1239
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Construction Year from: 04.2000
-
Oxygen Sensor: Regulating Probe,
Diagnostic Probe, Heated - Block Separation:
- Number of circuits: 4
- Overall Length [mm]: 410
- Name: LAMBDA ANDUR
- Manufacturer: MAX
Fitting Position: before catalytic converter, after catalytic converter


- Oxygen Sensor: Regulating Probe
- Fitting Position: Front
- Length [mm]: 550
- Number of connectors: 4
- Manufacturer: VERNET










































































- Number of pins: 2
- Manufacturer: DELPHI


- Voltage [V]: 12
- Corresponds to the original part in colour: grey
- Sensor Type: Hall Sensor
- Number of pins: 3
- Supplementary Article/Info 2: without cable
- Colour Coding: black
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.






























- Construction Year from: 04.2000
- Manufacturer: BOSCH





-
Transmission Type: for 4-
speed automatic transmission - Guarantee: 3 years guarantee
- Weight [kg]: 0.11
- Always compare old and new part (in particular OE No.):
- Name: CE 17SKV839
- Manufacturer: ESEN SKV





- Number of pins: 3
- Fitting Depth [mm]: 20
- Housing Colour: grey
- Weight [kg]: 0.018
- Manufacturer: ERA


- Cable Length [mm]: 370
-
Oxygen Sensor: Planar probe,
Heated - Name: LAMBDA ANDUR
- Manufacturer: DLP


- Number of pins: 3
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: DLP


Manufacturer: MAGNETI MARELLI


- Construction Year from: 04.2000
-
Oxygen Sensor: Regulating Probe,
Diagnostic Probe, Heated - Block Separation:
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Lisainfo: MGS-
615 -
Additional information: MGS-
615
Fitting Position: before catalytic converter, after catalytic converter



- Oxygen Sensor: Regulating Probe
- Overall Length [mm]: 420
- Number of circuits: 4
- Guarantee: 5 years guarantee
-
General Information: Sold in Hueco brand:
printing and packaging - Name: HU 135335
- Manufacturer: HITACHI


-
Oxygen Sensor: Regulating Probe,
Heated - Cable Length [mm]: 300
- Number of pins: 4
- Assy./disassy. by qualified personnel required!:
- Name: Lambda andur
- Manufacturer: HEL
Fitting Position: before catalytic converter, after catalytic converter Brief Information: *** HELLA Electronics OE competence for over 60 years.





- Construction Year from: 04.2000
-
Oxygen Sensor: Regulating Probe,
Heated - Voltage [V]: 12
- Length [mm]: 410
- Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.12
- Resistor [Ohm]: 6
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 09SKV671
- Manufacturer: ESEN SKV

- Conductor Number: 4
- Number of circuits: 4
- Length [mm]: 400
- Resistor [Ohm]: 9
- Cable Length [mm]: 400
- Oxygen Sensor: Heated
- Manufacturer: MAGNETI MARELLI


Manufacturer: MAGNETI MARELLI































- Construction Year from: 04.2000
-
Oxygen Sensor: Regulating Probe,
Diagnostic Probe - Block Separation:
- Number of circuits: 4
- Overall Length [mm]: 410
- Available as universal article as well, see article no.: 0258986615
-
Recommended change interval [km]: 160,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
Fitting Position: before catalytic converter, after catalytic converter


- Height [mm]: 20
- Guarantee: 5 years guarantee
- Manufacturer: HUCO





-
Oxygen Sensor: Diagnostic Probe,
Regulating Probe, Oxygen Sensor - Construction Year from: 04.2000
- Voltage [V]: 12
- Length [mm]: 565
- Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.13
- Resistor [Ohm]: 9
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 09SKV696
- Manufacturer: ESEN SKV
Exhaust System: after catalytic converter, before catalytic converter





























































-
Engine Code: RFN
(EW10J4) -
Line insulation design: with silicone-
coated woven- fibre insulation - Supplementary Article/Info 2: without plug
- Number of pins: 4
- for OE number: V99760001
- Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Length [mm]: 350
- Fitting Position: after catalytic converter
- Manufacturer: VEMO GERMANY
Oxygen Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.






























- Construction Year from: 04.2000
-
Oxygen Sensor: Regulating Probe,
Diagnostic Probe - Block Separation:
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
Fitting Position: before catalytic converter, after catalytic converter




-
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 93
- Gross Weight [g]: 140
- Manufacturer: DENSO
-
Name: DN DOX-
0150 - Quality class: Q
Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"


- Number of pins: 3
- Sensor Type: Hall Sensor
- Version: OE
- Manufacturer: METZGER


- Number of pins: 3
- Connector Shape: oval
- Number of mounting bores: 2
- Supplementary Article/Info 2: without cable
- Rotation Direction: Clockwise rotation
- for OE number: 1628JX
-
Name: Andur,
drosselklapiasend - Manufacturer: MD




Manufacturer: FAST


- Oxygen Sensor: Heated
- Length [mm]: 410
- Technical Information Number: Universal 77015
- Manufacturer: FAE



- Fitting Position: transmission sided
- Transmission Type: Automatic Transmission
-
Transmission ID: AL4,
AT8 - Number of pins: 3
- Cable Length [mm]: 790
- Version: IAM
- Manufacturer: METZGER


- Oxygen Sensor: Planar probe
- Number of pins: 4
-
Cable Length [mm]: 1,
370 - for OE number: 1628HQ
- Manufacturer: MEAT&DORIA

- Sensor Type: Hall Sensor
- Mounting Type: Screw Connection
- Shape: rectangular
- Number of pins: 3
- Supplementary Article/Info 2: with seal ring