• Number of pins: 2
• Manufacturer: JP GROUP
• Lisainfo: Sender Unit, coolant temperature
• Additional information: Sender Unit, coolant temperature

• for OE number: 1338A7
• Spanner Size: 19
• Housing Colour: green
• Manufacturer: KAMOKA

• Fabrication Number: ECT-CT-001
• Manufacturer: NTY

• for OE number: 6160 70, 963 505 72 80, 9635080680
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: rectangular
• Fabrication Number: ECP-CT-016
• Manufacturer: NTY
• Name: NTY ECP-CT-016

• Spanner Size: 19
• Colour: green
• Number of pins: 2
• Thread Size: M12 x 1,5, M12x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 9628454680
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Housing Type: Aluminium Housing
• Thread Size: M12x1.5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Colour: white
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Material: Plastic
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Spanner Size: 19
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FAST

• Supplementary Article/Info 2: without connector parts
• Corresponds to the original part in colour: brown, green
• Manufacturer: FAST

• Engine Code: RFN (EW10J4)
• Corresponds to the original part in colour: brown, green
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS
• Additional information: 1-994-005
• Lisainfo: 1-994-005

• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Number of mounting bores: 1
• Name: ANDUR,KIIRUS/P™™RDED
• Manufacturer: MAG

• Transmission Type: Automatic Transmission
• Transmission ID: AL4
• Number of pins: 3
• Name: ANDUR,KIIRUS
• Manufacturer: MAX
• Lisainfo: 6160.70/MG
• Additional information: 6160.70/MG

• Fabrication Number: ECP-CT-019
• Number of pins: 2
• Manufacturer: NTY

• Engine Code: RFN (EW10J4)
• Sensor Type: NTC Sensor
• Voltage [V]: 12
• Number of pins: 2
• Housing Colour: grey
• Manufacturer: FAE

• Connector Shape: rectangular
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S19
• Thread Size: M12*1,5
• Name: NI 207087
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Fabrication Number: ECP-CT-005
• Manufacturer: NTY

• for OE number: 9632400580
• Sensor Type: Passive sensor
• Manufacturer: KAMOKA

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Housing Colour: black
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 3
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• for OE number: 616024
• Name: Andur,kiirus/p””rded
• Manufacturer: MD

• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Housing Colour: green
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Manufacturer: DELPHI
• Name: DE TS10218-12B1

Manufacturer: FAST

• Mounting Type: Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 5,000, 600
• Supplementary Article/Supplementary Info: with gasket/seal
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: M12x1,5
• Colour: green
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Colour Coding: yellow
• Assy./disassy. by qualified personnel required!:
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Height [mm]: 24
• Resistor [Ohm]: 400
• Number of connectors: 2
• Manufacturer: VERNET

• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: green
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: RFN (EW10J4)
• Colour: green
• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: FACET

• Engine Code: RFN (EW10J4)
• Colour: green
• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: FACET
• Name: EP 1.830.276

• Construction Year from: 04.2000
• Construction Year to: 12.2000
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Construction Year from: 09.2000
• Number of pins: 3
• Connector Shape: rectangular
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Quality: OE EQUIVALENT
• for OE number: 9635080680
• Name: Andur,kiirus/p””rded
• Manufacturer: MD

• for RPO number up to: 08789
• Required quantity: 1
• Resistor [Ohm]: 390
• Colour: black
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Number of connectors: 2
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.041
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M12 x 1,5
• Spanner Size: 19
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Weight [kg]: 0.035
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: RFN (EW10J4)
• Sensor Type: NTC Sensor
• Thread Size: M12 x 1,5
• Spanner Size: 19
• Supplementary Article/Info 2: with seal ring
• Colour: green
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: green
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: SW 62 92 6318
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 25.5
• Connector Shape: rectangular
• Weight [kg]: 0.04
• Resistor M[ohm]: 2
• Manufacturer: ERA

• for RPO number up to: 08789
• Length [mm]: 24
• Number of connectors: 2
• Weight [kg]: 0.02
• for OE number: 1920.7N
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Construction Year to: 12.2000
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Construction Year to: 12.2000
• Number of pins: 2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

• for RPO number from: 08790
• Length [mm]: 24
• Number of connectors: 2
• Weight [kg]: 0.03
• for OE number: 1920.9C
• Name: SW 62 93 1245
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Height [mm]: 24
• Resistor [Ohm]: 400
• Number of connectors: 2
• Manufacturer: VERNET

Manufacturer: FAST

• Engine Code: RFN (EW10J4)
• Fitting Position: Outlet
• Sensor Type: Passive sensor
• Supplementary Article/Info 2: with seal ring, with cable
• Number of pins: 2
• Name: Andur,kiirus/p””rded
• Manufacturer: MAX

• for RPO number up to: 08789
• Length [mm]: 24
• Number of connectors: 2
• Weight [kg]: 0.02
• for OE number: 1920.7N
• Name: SW 62 92 6335
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 12.2000
• Manufacturer: NRF

• Construction Year to: 12.2000
• Number of pins: 2
• Fitting Depth [mm]: 24.2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: TRI

• Construction Year from: 01.2001
• Number of pins: 2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

• Engine Code: RFN (EW10J4)
• Construction Year from: 01.2001
• Name: EP 1.953.258
• Manufacturer: EPS

• Construction Year to: 12.2000
• Voltage [V]: 12
• Resistor [Ohm]: 475
• Tolerance [%]: 10
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PU009146421
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: RFN (EW10J4)
• Construction Year to: 12.2000
• Manufacturer Restriction: SIEMENS
• Manufacturer: FACET
• Name: EP 1.953.260

• Resistor [Ohm]: 380
• Colour: black
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 24
• Weight [kg]: 0.028
• Manufacturer: ERA

• Engine Code: RFN (EW10J4)
• Construction Year to: 12.2000
• Manufacturer Restriction: SIEMENS
• Manufacturer: FACET

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 400
• Manufacturer: VALEO

• VET Number to: 08789
• Number of pins: 2
• Manufacturer: VDO

• Construction Year from: 01.2004
• Engine Code: EW10J4
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 400
• Manufacturer: VALEO
• Name: VA 254049

• Construction Year from: 04.2000
• Construction Year to: 12.2000
• for RPO number up to: 8789
• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS

• Construction Year from: 01.2001
• for RPO number from: 8790
• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS

• VET Number to: 08789
• Number of pins: 2
• Manufacturer: FAE

• Resistor [Ohm]: 380
• Colour: black
• Number of pins: 2
• Fitting Depth [mm]: 24
• Weight [kg]: 0.028
• Manufacturer: ERA

• for RPO number from: 8790
• Supplementary Article/Info 2: without cable
• Manufacturer: FAE

• Construction Year from: 04.2000
• Manufacturer: BOSCH

• Transmission Type: Automatic Transmission
• Transmission ID: AL4
• Number of connectors: 3
• Weight [kg]: 0.04
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,KIIRUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Version: IAM
• Manufacturer: METZGER

• Transmission Type: Automatic Transmission
• Transmission ID: AL4
• Transmission Code: MA / MA S, BVA MB3
• Number of pins: 3
• Connector Shape: rectangular
• Weight [kg]: 0.04
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: RFN (EW10J4)
• Fitting Position: Outlet
• Operating voltage [V]: 12
• Sensor Type: Passive sensor
• Supplementary Article/Info 2: with seal ring, with cable
• Number of pins: 2
• Name: Andur,kiirus/p””rded
• Manufacturer: MEY

• Number of pins: 3
• Fabrication Number: EPO-CT-009
• Manufacturer: NTY

• Transmission Type: for 4-speed automatic transmission
• Guarantee: 3 years guarantee
• Weight [kg]: 0.11
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV839
• Manufacturer: ESEN SKV

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.09
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV767
• Manufacturer: ESEN SKV

• Number of pins: 3
• for OE number: 1131J6
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

Manufacturer: MAGNETI MARELLI

• Construction Year from: 12.2005
• Number of pins: 3
• Height [mm]: 142
• Fitting Depth [mm]: 111
• for OE number: 1131J6
• Name: Andur,Mootoriolitase
• Manufacturer: MD

• Length [mm]: 142.2
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 111.2
• Number of pins: 3
• Name: Andur,Mootoriolitase
• Manufacturer: VAL

Manufacturer: FAST

Manufacturer: MAGNETI MARELLI

• Fitting Position: transmission sided
• Transmission Type: Automatic Transmission
• Transmission ID: AL4, AT8
• Number of pins: 3
• Cable Length [mm]: 790
• Version: IAM
• Manufacturer: METZGER

• Transmission Type: Automatic Transmission
• Transmission ID: AL4
• Fitting Position: on transmission housing, Upper
• Manufacturer: METZGER

Construction Year from: 01.2001