• Production date to: 03/06/01
• Fitting Position: Front
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 30
• Length 2 [mm]: 34
• Length 1 [mm]: 28
• for OE number: 180904
• Name: KINNITUS,MOOTOR
• Manufacturer: SAS
• Lisainfo: 8091041 SAS
• Additional information: 8091041 SAS

• Fitting Position: Rear
• Height [mm]: 34
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.081
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Lower, Right, Upper, Rear
• Block Separation:
• Construction Year to: 05.2001
• for RPO number up to: 08974
• Manufacturer: DELPHI
• Name: DE TEM071

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Rear, Front
• Material: Rubber/Metal
• Height [mm]: 53
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 70
• Height 1 [mm]: 40
• Manufacturer: MERTZ

• Fitting Position: Rear, Front
• Mounting Type: Rubber-Metal Mount
• Lisainfo: Engine Mounting
• Additional information: Engine Mounting

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Rear
• Manufacturer: KAMOKA

• Fitting Position: Upper, Upper Right
• Production date to: 01/05/00
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 70
• Length 2 [mm]: 53
• Length 1 [mm]: 40
• for OE number: 180916
• Name: KINNITUS,MOOTOR
• Manufacturer: SAS

• Fitting Position: Rear, Front
• Width [mm]: 40, 53
• Weight [kg]: 0.26
• Material: Rubber/Metal
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 70
• Mounting Type: Rubber-Metal Mount
• Weight [g]: 260
• Manufacturer: METALCAUCHO

• Construction Year to: 06.2001
• Fitting Position: Right, Upper
• Mounting Type: Rubber-Metal Mount
• Outer Diameter [mm]: 70
• Inner Diameter [mm]: 10
• Name: PAIGUTUS,MOOTOR
• Manufacturer: MEY

• Fitting Position: Rear
• Weight [kg]: 0.17
• Height 1 [mm]: 40
• Height 2 [mm]: 53
• Material: Rubber/Metal
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 65
• Mounting Type: Rubber-Metal Mount
• Weight [g]: 170
• Manufacturer: METALCAUCHO

• Fitting Position: Upper, engine sided
• Construction Year to: 06.2001
• Vehicle Equipment: for vehicles without diesel soot filter
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 70
• for OE number: 180916
• Name: PAIGUTUS,MOOTOR
• Manufacturer: MAX

• Mounting Type: Rubber-Metal Mount
• for OE number: 9613 305 380
• Fitting Position: engine sided, Rear
• Outer Diameter [mm]: 70
• Inner Diameter [mm]: 10
• Weight [kg]: 0.2
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: DW10BTED
• for RPO number up to: 08575
• Fitting Position: Rear
• Length [mm]: 40, 53
• Weight [kg]: 0.29
• Material: Rubber/Metal
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 70
• Mounting Type: Rubber-Metal Mount
• Weight [g]: 290
• Manufacturer: METALCAUCHO

• Fitting Position: Right Rear, Right Front
• Material: Rubber/Metal
• Weight [g]: 308
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 70
• Length [mm]: 40
• Overall Length [mm]: 53
• Name: Paigutus,Mootor
• Manufacturer: IMP

• Fitting Position: Rear, Lower, Right, Upper, both sides
• Block Separation:
• Construction Year to: 05.2001
• for RPO number up to: 08974
• Name: DE TEM064
• Manufacturer: DELPHI

• Height [mm]: 40, 53
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 70
• Material: Rubber/Metal
• Fitting Position: Rear, Front
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.2
• Observe service information:
• Name: PAIGUTUS,MOOTOR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear
• Mounting Type: Rubber-Metal Mount
• Outer Diameter [mm]: 70
• Inner Diameter [mm]: 10
• Name: PAIGUTUS,MOOTOR
• Manufacturer: MEY

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Centre
• Manufacturer: FAST

• for RPO number up to: 08575
• Height [mm]: 40, 53
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 70
• Material: Rubber/Metal
• Fitting Position: Rear
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.1
• Observe service information:
• Name: PAIGUTUS,MOOTOR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Left
• Outer Diameter [mm]: 65
• Manufacturer: GSP

• Inner Diameter [mm]: 10
• Height [mm]: 40, 53
• Outer Diameter [mm]: 70
• Material: Rubber/Metal
• Fitting Position: Rear, Front
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.2
• Name: SW 62 13 0006
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for RPO number up to: 08575
• Height [mm]: 40, 53
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 70
• Material: Rubber/Metal
• Fitting Position: Rear
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.1
• Name: SW 62 13 0003
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle type: Jumpy
• Mounting Type: Rubber-Metal Mount
• Fitting Position: Front
• Net weight [kg]: 0.29
• Name: Paigutus,Mootor
• Manufacturer: NK

• for OE number: 182710
• Fitting Position: Left Front
• Material: Rubber/Metal
• Weight [g]: 420
• Name: IM 36311
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Rear, Front
• Weight [g]: 296
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 70
• Length [mm]: 40
• Overall Length [mm]: 53
• Name: Paigutus,Mootor
• Manufacturer: IMP

• Fitting Position: Rear
• Weight [kg]: 0.25
• Height 1 [mm]: 50
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 70
• Mounting Type: Rubber-Metal Mount
• Weight [g]: 250
• Manufacturer: METALCAUCHO

• Fitting Position: Rear
• not for article number: 2995
• Weight [kg]: 0.33
• Mounting Type: Rubber-Metal Mount
• Weight [g]: 330
• Manufacturer: METALCAUCHO

• Mounting Type: Rubber-Metal Mount
• Fitting Position: inner, Lower Right
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Right Front
• Manufacturer: MERTZ

• Fitting Position: Right
• for RPO number up to: 08575
• for OE number: 1809 16
• Name: PAIGUTUS,MOOTOR
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Upper Right
• for RPO number from: 08576
• Mounting Type: Rubber-Metal Mount
• Manufacturer: JP GROUP
• Lisainfo: Engine Mounting
• Additional information: Engine Mounting

• Fitting Position: Right, Upper
• for OE number: 1806 28
• Manufacturer: GSP

• Length [mm]: 112
• Fitting Position: Upper Right
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 10
• Name: PAIGUTUS,MOOTOR
• Manufacturer: MAX

• Fitting Position: Right
• Mounting Type: Rubber-Metal Mount
• Name: PAIGUTUS,MOOTOR
• Manufacturer: MAX

• Fitting Position: Left
• Material: Rubber/Metal
• for OE number: 1827.16
• Mounting Type: Rubber-Metal Mount
• Name: Transmission mounting left
• Quality class: PJ

Lisainfo: "Tootja: SRL
CITROEN EVASION, 94-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
CITROEN EVASION, 94-
(kvaliteediklass: PJ)"

• Fitting Position: Right
• Length [mm]: 112
• Weight [kg]: 0.795
• Inner Diameter [mm]: 10.15
• Mounting Type: Rubber-Metal Mount
• Weight [g]: 795
• Manufacturer: METALCAUCHO

• Construction Year from: 06.2001
• Vehicle type: Jumpy
• Mounting Type: Rubber-Metal Mount
• Fitting Position: Front
• Net weight [kg]: 0.78
• Name: Paigutus,Mootor
• Manufacturer: NK

• Engine Code: RHX (DW10BTED)
• Emission Standard: CEE W4, CEE W3
• Block Separation:
• for RPO number from: 08576
• Mounting Type: Hydro Mount
• Fitting Position: Right
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Right
• Mounting Type: Rubber-Metal Mount
• Manufacturer: BGA

• Engine Code: RHX (DW10BTED)
• Emission Standard: CEE W4, CEE W3
• Block Separation:
• for RPO number from: 08576
• Mounting Type: Rubber-Metal Mount
• Fitting Position: Upper Right
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Upper Right
• Fabrication Number: ZPS-CT-030
• Mounting Type: Rubber-Metal Mount
• Manufacturer: NTY

• Fitting Position: Upper Right
• Length [mm]: 112
• Inner Diameter [mm]: 10
• Mounting Type: Rubber-Metal Mount
• Fabrication Number: ZPS-PE-006
• Manufacturer: NTY

• Construction Year from: 06.2001
• for model code: Jumpy
• for RPO number from: 08974
• Fitting Position: Rear, Right, Upper
• Quality: OE Performance
• Operating Mode: Manual
• Colour: silver
• Weight [g]: 853
• Manufacturer: GATES

• Fitting Position: Left
• for OE number: 1827,16
• Manufacturer: GSP ZAWIESZENIE

• for OE number: 180628
• Fitting Position: Right Front
• Mounting Type: Rubber-Metal Mount
• Rod/Strut: Coupling Rod
• Weight [g]: 772
• Name: Paigutus,Mootor
• Manufacturer: IMP

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Upper Right
• Manufacturer: FAST

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Front, Upper Left
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Production date from: 02/05/00
• Production date to: 12/06
• Mounting Type: Rubber-Metal Mount
• Fitting Position: Upper Right
• for OE number: 184492
• Name: KINNITUS,MOOTOR
• Manufacturer: SAS

• Weight [kg]: 0.76
• Fitting Position: Right
• Inner Diameter [mm]: 10
• Manufacturer: 3RG

• Fitting Position: Left
• Weight [kg]: 0.78
• Mounting Type: Hydro Mount
• Weight [g]: 780
• Manufacturer: METALCAUCHO

• Fitting Position: Rear, Left Rear
• Required quantity: 1
• Material: Rubber/Metal
• Weight [g]: 958
• Name: Paigutus,Mootor
• Manufacturer: IMP

• for RPO number up to: 08975
• Fitting Position: Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.85
• for OE number: 1827.33
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 05.2000
• Mounting Type: Hydro Mount
• Fitting Position: Front
• Net weight [kg]: 0.88
• Name: Paigutus,Mootor
• Manufacturer: NK

• for OE number: 184491, 184493
• Fitting Position: Right Front
• Required quantity: 1
• Outer Diameter [mm]: 93
• Weight [g]: 914
• Name: Paigutus,Mootor
• Manufacturer: IMP

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Front
• Net weight [kg]: 0.86
• Name: Paigutus,Mootor
• Manufacturer: NK

• Production date from: 04/06/01
• Production date to: 12/06
• Mounting Type: Rubber-Metal Mount
• Fitting Position: Upper Right
• for OE number: 180674
• Name: KINNITUS,MOOTOR
• Manufacturer: SAS
• Lisainfo: 8061741 SAS
• Additional information: 8061741 SAS

• Construction Year from: 06.2001
• Fitting Position: Rear, Right, Upper, Front
• for RPO number from: 08974
• Name: DE TEM020
• Manufacturer: DELPHI

• Length [mm]: 112
• Thickness [mm]: 16.5
• Inner Diameter [mm]: 10
• Fitting Position: Upper Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.75
• Observe service information:
• Name: PAIGUTUS,MOOTOR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Fitting Position: Right Front
• Weight [kg]: 0.84
• Mounting Type: Hydro Mount
• Manufacturer: TEDGUM
• Name: TG 00514176

• Fitting Position: Rear
• Name: COC 49368244
• Manufacturer: CORTECO

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Front
• Name: Engine mounting right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
C.JUMPY/EVASION 95-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
C.JUMPY/EVASION 95-
(kvaliteediklass: PJ)"

• Construction Year from: 05.2000
• Fitting Position: Right, Front
• for RPO number from: 08576
• Manufacturer: DELPHI ZAWIESZENIE

• Construction Year to: 04.2000
• Fitting Position: Right, Front
• for RPO number up to: 08575
• Manufacturer: DELPHI
• Name: DE TEM078

• Production date to: 01/05/00
• Mounting Type: Rubber-Metal Mount
• Fitting Position: Upper Right
• for OE number: 182733
• Name: KINNITUS,MOOTOR
• Manufacturer: SAS

• Production date to: 12/06
• Mounting Type: Rubber-Metal Mount
• Fitting Position: transmission sided
• for OE number: 182716
• Name: KINNITUS,MOOTOR
• Manufacturer: SAS

• Colour: beige
• Fitting Position: Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 1.3
• for OE number: 1844.93
• Observe service information:
• Name: PAIGUTUS,MOOTOR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Material: Rubber/Metal
• Fitting Position: Left
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 1
• for OE number: 1827.16
• Name: SW 64 13 0011
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Right
• Weight [kg]: 1.3
• Hardness (Rockwell), up to [HRC]: 45
• Mounting Type: Hydro Mount
• Manufacturer: METALCAUCHO

• Fitting Position: Right
• Weight [kg]: 0.75
• Mounting Type: Hydro Mount
• Weight [g]: 750
• Manufacturer: METALCAUCHO

• for OE number: 1483748080
• Fitting Position: Right Front
• Mounting Type: Hydro Mount
• Weight [g]: 791
• Name: IM 27749
• Manufacturer: ORIGINAL IMPERIUM

• for RPO number from: 08576
• Fitting Position: Right, Upper
• for OE number: 1806 28, 9631575180, 9641884980
• Name: PAIGUTUS,MOOTOR
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Right
• Weight [kg]: 0.72
• Mounting Type: Hydro Mount
• Manufacturer: CORTECO
• Name: COC 80000036

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Left
• Material: Rubber/Metal
• Manufacturer: FAST

• Fitting Position: Rear
• Mounting Type: Rubber Mount
• Material: Rubber/Metal
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.