Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Construction Year to: 12.1998
- Fitting Position: Front Axle
- Inner Diameter [mm]: 79.3
- Width [mm]: 10.3
- Outer Diameter [mm]: 99
- Number of Teeth, ABS ring: 48
-
Name: ANDUR,
ABS - Manufacturer: TRI
- Construction Year to: 12.1998
- Fitting Position: Front Axle
- Outer Diameter [mm]: 99
- Width [mm]: 10.3
- Number of Teeth: 48
- Inner Diameter [mm]: 79
-
Name: ANDUR,
ABS - Manufacturer: MAX
- Construction Year to: 12.1998
-
Fitting Position: Front Axle,
Front Axle both sides - Width [mm]: 10.3
- Number of Teeth, ABS ring: 48
- Inner Diameter [mm]: 79.3
- Outer Diameter [mm]: 99
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle Left,
Front Axle Right -
Fabrication Number: HCA-
CT- 009 - Manufacturer: NTY
- Construction Year to: 11.1998
- Brake Type: Drum Brake
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Fabrication Number: HCA-
CT- 010 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle
- Manufacturer: KAMOKA
- Fitting Position: Front Axle
- Cable Length [mm]: 560
- Number of pins: 2
- Sensor Type: Inductive Sensor
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Construction Year to: 11.1998
- Fitting Position: Rear Axle
- Cable Length [mm]: 775
- Number of pins: 2
- Sensor Type: Inductive Sensor
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Fitting Position: Front Axle
-
Resistor [Ohm]: 1,
100 - for OE number: 4545.6
- Number of pins: 2
- Number of mounting bores: 1
- Name: MM MWSS062
- Manufacturer: MAGNETI MARELLI
- Fitting Position: Rear Axle
-
Resistor [Ohm]: 1,
100 - for OE number: 4545.8
- Number of pins: 2
- Number of mounting bores: 1
- Name: MM MWSS063
- Manufacturer: MAGNETI MARELLI
- Sensor Type: Passive sensor
- Required quantity: 2
- Cable Length [mm]: 480
- Number of pins: 2
- Fitting Position: Front Axle
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MAX
- Sensor Type: Passive sensor
- Number of pins: 2
- Cable Length [mm]: 687
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Manufacturer: AUTOFREN SEINSA
- Name: SE DS0167
- Braking System: for vehicles with drum brakes on the rear axle
- for RPO number from: 08029
- Sensor Type: Inductive Sensor
- Cable Length [mm]: 700
- Number of pins: 2
- Fitting Position: Rear Axle
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MEY
- Installatsiooni pool: Esisild
- Pikkus (mm): 490
- Pistikkontaktide arv: 2
- Pistikute teostus: Male
- Pistikukatte kuju: ristkülik
- Garantii: 3 aastat garantii
- Pinge [V]: 12
-
Kaal (kg): 0,
12 - Värv: sinine
- Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Name: CE 06SKV090
- Manufacturer: ESEN SKV
- Braking System: for vehicles with drum brakes on the rear axle
- Installatsiooni pool: Tagasild
- Pikkus (mm): 700
- Pistikkontaktide arv: 2
- Pistikute teostus: Female
- Pistikukatte kuju: ristkülik
- Garantii: 3 aastat garantii
- Pinge [V]: 12
-
Kaal (kg): 0,
13 - Värv: sinine
- Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 06SKV091
- Fitting Position: Rear Axle
- Construction Year from: 12.1998
- Quantity: 2
- Net weight [kg]: 0.1
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: NK
- Fitting Position: Front Axle
- Required quantity: 2
- Cable Length [mm]: 590
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: TRI
- Number of pins: 2
- Cable Length [mm]: 668
- Sensor Type: Passive sensor
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Manufacturer: AUTOFREN SEINSA
- Construction Year to: 11.1998
- Fitting Position: Rear Axle
- Required quantity: 2
- Cable Length [mm]: 740
- Fitting Depth [mm]: 29.9
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: TRI
- Fitting Position: Front Axle
- Sensor Type: Passive sensor
- Number of occupied pins: 2
- Cable Length [mm]: 475
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE SS20047
- Sensor Type: Inductive Sensor
- Cable Length [mm]: 515
- Number of pins: 2
- Fitting Position: Front Axle
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MEY
- Cable Length [mm]: 775
- Fitting Position: Rear Axle Right
-
Manufacturer: SNR /
NTN- SNR/ - Name: SN ASB159.10
- Construction Year from: 12.1998
- Fitting Position: Rear Axle
- Required quantity: 2
- Cable Length [mm]: 743
- Fitting Depth [mm]: 29.9
- Number of pins: 2
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: TRI
- Fitting Position: Front Axle both sides
- Inner Diameter [mm]: 54
- Width [mm]: 24.5
- Outer Diameter [mm]: 86
- Number of Teeth, ABS ring: 48
-
Name: ANDUR,
ABS - Manufacturer: TRI
- Fitting Position: Rear Axle
- Overall Length [mm]: 800
- Length [mm]: 30
- Sensor Type: Passive sensor
- Socket colour: blue
- Cable Length [mm]: 700
- paired article number: 30396
- Weight [kg]: 0.14
- Manufacturer: ABS
- Fitting Position: Rear Axle
- Construction Year from: 11.1998
- Brake Type: Drum Brake
- for RPO number from: 08029
- Sensor Type: Passive sensor
- Number of occupied pins: 2
- Cable Length [mm]: 695
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE SS20297
- Fitting Position: Rear Axle
- Construction Year to: 11.1998
- Sensor Type: Passive sensor
- Number of occupied pins: 2
- Cable Length [mm]: 735
- Name: DE SS20152
- Manufacturer: DELPHI
- Braking/Driving Dynamics: for vehicles with ABS
- Cable Length [mm]: 790
-
Fitting Position: Rear Axle Right,
Rear Axle Left -
Manufacturer: SNR /
NTN- SNR/
- Fitting Position: Rear Axle
- Construction Year to: 11.1998
- Cable Length [mm]: 740
- Sensor Type: Inductive Sensor
- Number of pins: 2
- Manufacturer: FAE
- Fitting Position: Rear Axle Right
- Number of pins: 2
- Cable Length [mm]: 606
- Sensor Type: Active sensor
- Manufacturer: AUTOFREN SEINSA
- Required quantity: 2
- Fitting Position: Front Axle
- Length [mm]: 515
- MAPP code available:
- Manufacturer: ATE
- Engine Code: HDY
- Fitting Position: Front Axle
- Sensor Type: Passive sensor
- Supplementary Article/Info 2: with cable
- Overall Length [mm]: 575
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 150
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: BOS
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks