Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Construction Year from: 08.1996
- Construction Year to: 12.2000
-
Elektroodide vahe (mm): 1,
1 -
Keermemõõt: M14 x 1,
25 - Võtmekaugus: 16
- Keermepikkus (mm): 19
- Väändejõud [Nm]: 30
-
Süüteküünal: 1-
massielektrood - Monteerimist/demonteerimist peab tegema spetsialist!:
- Manufacturer: HELLA ELEKTRYKA
- Construction Year from: 08.1996
- Construction Year to: 12.2000
-
Fuel Type: CNG/
LPG - Supplementary Article/Info 2: Electrode gap must be set for operation on gas
-
Replace after km: 15,
000 -
Elektroodide vahe (mm): 0,
7 - Pikkus (mm): 126
-
Süüteküünal: 1-
massielektrood - Versioon: E7EC1
- Manufacturer: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 08.1996
- Construction Year to: 12.2000
-
Fuel Type: CNG/
LPG - Supplementary Article/Info 2: Electrode gap must be set for operation on gas
-
Replace after km: 15,
000 -
Elektroodide vahe (mm): 0,
7 - Pikkus (mm): 126
- Kõrgus (mm): 51
-
Süüteküünal: 1-
massielektrood - Versioon: VR7EC1
- Manufacturer: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- electrode gap to be set [mm]: 1.3
- Construction Year from: 08.1996
- Construction Year to: 12.2000
- Required quantity: 4
-
Elektroodide vahe (mm): 1,
1 - Väändejõud [Nm]: 28
-
Keermemõõt: M 14 x 1,
25 - Keermepikkus (mm): 19
- Võtmekaugus: 16
- Sädemeasetus (mm): 3
- Pistikkontaktide arv: 1
- Name: STEKNAL
- Manufacturer: BOS
- Engine Code: B00
-
Süüteküünal: 1-
massielektrood, koos takistusega -
Elektroodide vahe (mm): 1,
1 - Keermemõõt: M14 x 1.25
- Keermepikkus (mm): 19
- Võtmekaugus: 16
-
Tehniline informatsioon: Nichel-
Chromium with internal in branch - Manufacturer: MAGNETI MARELLI
- Engine Code: B00
- Required quantity: 4
- Quantity per packing unit: 10
-
Süüteküünal: 1-
massielektrood, Niklist keskelektrood - Keermepikkus (mm): 19
- Läbimõõt [mm]: 14
-
OE-numbri jaoks: 90080-
91193 - Ühendustehnika: Solid SAE
- Võtmekaugus: 16
- Väändejõud [Nm]: 22
- Kaal (g): 43
- Brutokaal [g]: 46
- alternatiivne toode: K16TT
- Manufacturer: DENSO
- Name: DN K16RU11
- Construction Year from: 08.1996
- Construction Year to: 12.2000
-
Fuel Type: CNG/
LPG - Supplementary Article/Info 2: Electrode gap must be set for operation on gas
-
Replace after km: 15,
000 - Required quantity: 4
-
Elektroodide vahe (mm): 0,
9 - Väändejõud [Nm]: 28
-
Keermemõõt: M 14 x 1,
25 - Keermepikkus (mm): 19
- Võtmekaugus: 16
- Sädemeasetus (mm): 3
- Pistikkontaktide arv: 1
- Name: STEKNAL
- Manufacturer: BOS
- Engine Code: B00
- Required quantity: 4
- Quantity per packing unit: 4
-
Süüteküünal: 1-
massielektrood, Niklist keskelektrood - Keermepikkus (mm): 19
- Läbimõõt [mm]: 14
- OE-numbri jaoks: 1WT2 18 110
- Ühendustehnika: Solid SAE
- Võtmekaugus: 16
- Väändejõud [Nm]: 22
- Kaal (g): 43
- Brutokaal [g]: 46
-
alternatiivne toode: IK16TT,
IK16 - Manufacturer: DENSO
- Name: DN K16TT
- Lisainfo: K16TT DENSO
- Additional information: K16TT DENSO
- Electrode Gap [mm]: 1.1
- Engine Code: EDZ BOO
- Võtmekaugus: 16 mm
-
Keermemõõt: M14 x 1,
25 - Keermepikkus (mm): 19
- Sädemeasetus (mm): 5
- Name: STEKNAL
- Manufacturer: NGK
Süüteküünal: Niklist keskelektrood, 1-massielektrood, veakõrvaldused, 5 koom, koos lametihendikohaga, püsiv SAE-ühendus
- Construction Year to: 12.2000
- Required quantity: 4
- Quantity per packing unit: 4
- Electrode Gap [mm]: 1.3
- Connector type: SAE
- Thread Size: M14x1.25
- Spanner Size: 16 mm
- Quality/ Grade: Nickel GE
- Packing Type: Carton
- Thread Length [mm]: 19
- Technical Information Number: RC12YC5
- Spark Position [mm]: 3
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 9.5
- Packaging width [cm]: 2.4
- Packaging height [cm]: 2.2
- Resistor from [kOhm]: 6
- Resistor to [kOhm]: 15
- Projection [mm]: 1.5
- Name: CH CCH89
- Manufacturer: CHAMPION
Spark Plug: 1 - Earthed Electrode, with gasket seat, Copper Centre Electrode
- Construction Year from: 01.2001
- Required quantity: 4
- Quantity per packing unit: 4
- Electrode Gap [mm]: 1.1
- Connector type: SAE
- Thread Size: M14x1.25
- Spanner Size: 16 mm
- Quality/ Grade: Nickel GE
- Packing Type: Carton
- Thread Length [mm]: 25
- Technical Information Number: RE16MC
- Spark Position [mm]: 5
- Tightening torque from [Nm]: 15
- Tightening torque to [Nm]: 20
- Packaging length [cm]: 9.5
- Packaging width [cm]: 2.4
- Packaging height [cm]: 2.2
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 7.5
- Projection [mm]: 3
- Manufacturer: CHAMPION
Spark Plug: 1 - Earthed Electrode, with taper seat, Copper Centre Electrode
- Väändejõud [Nm]: 25
- Elektroodide vahe (mm): 1
- Keermemõõt: M14 x 1.25
- Võtmekaugus: 16
-
Süüteküünal: 1-
massielektrood - Keermepikkus (mm): 19
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Name: HE 8EH188705071
- Manufacturer: HELLA
- Construction Year from: 08.1996
- Construction Year to: 12.2000
-
Fuel Type: CNG/
LPG -
Replace after km: 30,
000 -
Elektroodide vahe (mm): 1,
1 - Keermemõõt: M14
- Võtmekaugus: 16 [mm]
- Pistikkontaktide arv: 1
- Keermepikkus (mm): 19
-
Keerme samm (mm): 1,
25 - Manufacturer: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 08.1996
- Construction Year to: 12.2000
-
Fuel Type: CNG/
LPG -
Replace after km: 30,
000 - Required quantity: 4
-
Elektroodide vahe (mm): 0,
7 - Väändejõud [Nm]: 28
-
Keermemõõt: M 14 x 1,
25 - Keermepikkus (mm): 19
- Võtmekaugus: 16
- Sädemeasetus (mm): 4
- Pistikkontaktide arv: 1
- Name: STEKNAL
- Manufacturer: BOS
- Engine Code: B00
- Required quantity: 4
-
Fuel Type: CNG/
LPG - Quantity per packing unit: 4
- Keermepikkus (mm): 19
- Läbimõõt [mm]: 14
- Ühendustehnika: Solid SAE
- Võtmekaugus: 16
- Väändejõud [Nm]: 22
- Kaal (g): 43
- Brutokaal [g]: 46
- alternatiivne toode: IK16TT
- Manufacturer: DENSO
- Name: DN IK16TT
- Lisainfo: IK16TT DENSO
- Additional information: IK16TT DENSO
Süüteküünal: koos takistusega, 1-massielektrood, Iriidiumist keskelektrood
- Construction Year from: 01.1996
- Required quantity: 4
-
Fuel Type: Liquefied Petroleum Gas
(LPG) - Alternatively:
-
Recommended change interval [km]: 30,
000 - Quantity per packing unit: 10
- Electrode Gap [mm]: 0.7
- Connector type: SAE
-
Thread Size: M14x1,
25 - Spanner Size: 16 mm
-
Spark Plug: 1 -
Earthed Electrode, with gasket seat - Thread Length [mm]: 19
-
Technical Information Number: 14 FR-
7 DPPUS2 - Self-service suited packaging see parts list:
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Name: STEKNAL
- Manufacturer: BERU
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks