Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)


- for OE number: 13 38 511
- Width [mm]: 33
- Height [mm]: 30
- Length [mm]: 58
- Guarantee: 3 years guarantee
- Number of pins: 2
- Manufacturer: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.


- Engine Code: 939 A.000
-
Thread Size: M12x1,
5 - Spanner Size: 19
-
Corresponds to the original part in colour: white,
green, black -
for article number: 1.880.170,
1.880.190 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS


- Outer Diameter [mm]: 7.4
-
Resistor [Ohm]: 2,
080, 294 -
Supplementary Article/Supplementary Info: with gasket/
seal - External Thread [mm]: 12
- Thread Pitch [mm]: 1.5
-
Temperature range [°C]: 25,
80 - Mounting Type: Bolted
- Colour: blue
- Spanner Size: 19
- Sensor Type: NTC Sensor
- Number of pins: 2
-
Corresponds to the original part in colour: black,
white, light blue - Assy./disassy. by qualified personnel required!:
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.


- Engine Code: 939 A.000
-
Thread Size: M12x1,
5 - Spanner Size: 19
-
Corresponds to the original part in colour: white,
green, black -
for article number: 7.8170,
7.8190 - Manufacturer: FACET


- Number of pins: 2
- Housing Colour: blue
-
Supplementary Article/Supplementary Info: with gasket/
seal -
Corresponds to the original part in colour: black,
light blue, white - Manufacturer: METZGER





























































- Number of pins: 2
-
Thread Size: M12x1,
5 - Supplementary Article/Info 2: with seal ring
- Housing Colour: black
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.


- Required quantity: 1
- Manufacturer: BREMI




-
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased -
Fabrication Number: ESL-
SK- 000 - Manufacturer: NTY
-
Name: NTY ESL-
SK- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.





- Oxygen Sensor: Regulating Sensor
- Number of circuits: 4
- Manufacturer: KAMOKA










































































- Number of pins: 2
- Name: DE AS10192
- Manufacturer: DELPHI


- Measuring Range from [kPa]: 10
- Measuring Range to [kPa]: 117.5
- Measuring Range from [V]: 0.392
- Measuring Range to [V]: 4.75
- Number of connectors: 3
- Manufacturer: VERNET



-
Oxygen Sensor: Switching-
type Oxygen Sensor - Voltage [V]: 12
- Number of circuits: 4
- Weight [kg]: 0.09
- Resistor [Ohm]: 9
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: ENERGY


- Engine Code: 939 A.000
- Pressure from [kPA]: 10
- Pressure to [kPA]: 118
- Output Voltage, from [V]: 0.392
- Output Voltage, up to [V]: 4.75
- Manufacturer: FACET




-
Oxygen Sensor: Switching-
type Oxygen Sensor - Voltage [V]: 12
- Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.09
- Resistor [Ohm]: 9
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: ESEN SKV





- Engine Code: 939 A.000
- Number of pins: 3
- Fitting Depth [mm]: 28
- Weight [kg]: 0.022
- Manufacturer: ERA


- Construction Year to: 12.2010
-
Oxygen Sensor: Diagnostic Probe,
Finger- type Sensor - Fitting Position: after catalytic converter
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Transmission Type: Manual Transmission
- Name: LAMBDA ANDUR
- Manufacturer: MAX


- Engine Code: 939 A.000
- Pressure from [kPA]: 10
- Pressure to [kPA]: 118
- Output Voltage, from [V]: 0.392
- Output Voltage, up to [V]: 4.75
- Manufacturer: EPS


- Engine Code: 939 A.000
- Fitting Position: after catalytic converter
- Cable Length [mm]: 650
- Conductor Number: 4
- Available as universal article as well, see article no.: 1.998.240
- Number of circuits: 4
- Name: LAMBDA ANDUR
- Manufacturer: EPS
Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased


- Number of pins: 3
- Pressure from [kPA]: 10
- Pressure to [kPA]: 115
- Manufacturer: FAE






























- Construction Year to: 12.2010
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS


- Fitting Position: Front
- Oxygen Sensor: Regulating Sensor
- Length [mm]: 630
- Number of connectors: 4
- Manufacturer: VERNET





























- Construction Year to: 12.2010
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
- Overall Length [mm]: 640
- Available as universal article as well, see article no.: 0258986602
-
Recommended change interval [km]: 250,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS




-
Oxygen Sensor: Switching-
type Oxygen Sensor - Voltage [V]: 12
- Colour: red
- Guarantee: 3 years guarantee
- Number of circuits: 5
- Weight [kg]: 0.15
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV905


- Engine Code: 939 A.000
-
Fitting Position: Left,
Right, Front, after catalytic converter - Cable Length [mm]: 720
- Conductor Number: 5
- Supplementary Article/Info 2: with fastening material
- Number of circuits: 5
- Name: EP 1.998.420
- Manufacturer: EPS
- Additional information: EP 1.998.420
- Lisainfo: EP 1.998.420
Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased


-
Oxygen Sensor: Diagnostic Probe,
Planar Sensor - Number of pins: 4
- Connector Shape: oval
- Cable Length [mm]: 510
- for OE number: 46750243
- Manufacturer: MEAT&DORIA



- Construction Year to: 09.2010
-
Oxygen Sensor: Planar Sensor,
Thread pre- greased, Heated - Number of pins: 4
- Cable Length [mm]: 650
-
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Connector Shape: oval
- Manufacturer: VALEO
Fitting Position: before catalytic converter, after catalytic converter







- Voltage [V]: 12
- Housing Type: with housing
- Number of pins: 5
- Guarantee: 3 years guarantee
- New Part:
- Used part return not required:
- Weight [kg]: 0.31
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY





-
Oxygen Sensor: Switching-
type Oxygen Sensor - Guarantee: 3 years guarantee
- Weight [kg]: 0.15
- Always compare old and new part (in particular OE No.):
- Technical Information: Universal
- Name: CE 09SKV915
- Manufacturer: ESEN SKV






























- Construction Year to: 12.2010
- Oxygen Sensor: Regulating Sensor
- Fitting Position: before catalytic converter
- Number of circuits: 5
- Overall Length [mm]: 730
-
Recommended change interval [km]: 250,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS