• Supplementary Article/Info 2: with integrated air temperature sensor
• Fabrication Number: ECM-PL-000
• Manufacturer: NTY
• Name: NTY ECM-PL-000

• for OE number: 13 38 040
• Width [mm]: 33
• Height [mm]: 30
• Length [mm]: 58
• Guarantee: 3 years guarantee
• Number of pins: 2
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Fabrication Number: ECP-PL-011
• Manufacturer: NTY

• Engine Code: 937 A4.000
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: EP 1.830.261
• Manufacturer: EPS

for article number: 1.830.233K, 1.880.115, 1.880.179, 1.880.180, 1.880.405, 1.880.411, 1.880.572, 1.880.580, 1.880.581, 1.880.582, 1.880.585, 1.880.639, 1.880.669, 1.880.670, 1.880.673, 1.880.675

• Engine Code: 937 A4.000
• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: FACET

for article number: 7.3233K, 7.8115, 7.8179, 7.8180, 7.8405, 7.8411, 7.8572, 7.8580, 7.8581, 7.8582, 7.8585, 7.8639, 7.8669, 7.8670, 7.8673, 7.8675

• Engine Number from: 6393619
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV171

• for OE number: 55 190 791
• Length [mm]: 62
• Thread Size: M12 x 1,5
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Housing Colour: green
• Manufacturer: VIEROL

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Number of pins: 2
• Housing Colour: green
• Manufacturer: FAE

• Connector Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

Manufacturer: JPN

• Thread Size: M12x1,5
• Spanner Size: 19
• Number of pins: 2
• Mounting Type: Screw Connection
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT013113091
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Pressure from [kPA]: 11
• Pressure to [kPA]: 30
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Required quantity: 1
• Supplementary Article/Info 2: with integrated air temperature sensor
• Manufacturer: BREMI

• Number of pins: 4
• Pressure from [kPA]: 27
• Manufacturer: DELPHI
• Name: DE PS10144

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV113

• Emission Standard: Euro 3 (D3), Euro 4 (D4)
• Required quantity: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 28
• Quality: OE EQUIVALENT
• for OE number: 55201876
• Manufacturer: MEAT&DORIA

• Number of pins: 4
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Supplementary Article/Info 2: with integrated air temperature sensor
• Quality: OE EQUIVALENT
• for OE number: 01235084
• Manufacturer: MEAT&DORIA

• Housing Type: with housing
• Number of pins: 5
• Voltage [V]: 12
• Fabrication Number: EPP-AR-002
• Manufacturer: NTY

• Resistor [Ohm]: 850
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring
• Weight [kg]: 0.022
• Rated Voltage [V]: 12
• Housing Diameter [mm]: 20.7
• Manufacturer: ERA

• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Connector Shape: oval
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Manufacturer: FAST

• Measuring Range from [kPa]: 11
• Measuring Range to [kPa]: 307
• Measuring Range from [V]: 0.25
• Measuring Range to [V]: 4.75
• Number of connectors: 4
• Manufacturer: VERNET

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 28
• Weight [kg]: 0.022
• Alternative Repair Kit: 550001
• Manufacturer: ERA

• Manufacturer: BOSCH
• Name: BS 0281006028

• Engine Number from: 6393619
• Length [mm]: 59
• Bore Diameter [mm]: 7.4
• Number of connectors: 4
• Material: Plastic
• Weight [kg]: 0.027
• Supplementary Article/Info 2: with seal ring
• for OE number: 12 35 029
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Depth [mm]: 28
• Number of connectors: 3
• Number of mounting bores: 1
• Rated Voltage [V]: 12
• Operating temperature from [°C]: -40
• Operating temperature to [°C]: 125
• Sensor Type: Hall Sensor
• Connector Shape: oval
• Colour: black
• Name: SN CMP160.01
• Manufacturer: SNR

• Engine Number from: 6393619
• Length [mm]: 59
• Bore Diameter [mm]: 7.4
• Number of connectors: 4
• Material: Plastic
• Weight [kg]: 0.027
• for OE number: 12 35 029
• Supplementary Article/Info 2: with seal ring
• Name: SW 40 93 7055
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 55204763
• Overall Length [mm]: 1,085
• Number of pins: 2
• Fabrication Number: EGT-AR-005
• Cable Length [mm]: 930
• Manufacturer: NTY

• for OE number: 51790443
• Number of pins: 2
• Connector Shape: oval
• Fabrication Number: EGT-AR-008
• Cable Length [mm]: 1,510
• Manufacturer: NTY

• Emission Standard: Euro 3
• Corresponds to the original part in colour: black
• Fitting Position: frontal sided
• Number of pins: 3
• Sensor Type: Impulse Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009121321

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 5
• Housing Type: with housing
• Connector Shape: oval
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: 937 A4.000
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Housing Type: with housing
• Fabrication Number: EPP-AR-008
• Manufacturer: NTY

• Number of pins: 4
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Manufacturer: VDO

• Supplementary Article/Info 2: High Pressure Side
• Number of pins: 3
• for OE number: 580 147 451 2
• Fuel Mixture Formation: Common Rail (CR)
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS
• Lisainfo: ABA120-08-192
• Additional information: ABA120-08-192

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Quality class: PJ
• Name: Air flow sensor

• Fuel Mixture Formation: Common Rail (CR)
• Fabrication Number: EFP-FT-004
• Manufacturer: NTY
• Name: NTY EFP-FT-004

• for OE number: 46811122
• Manufacturer: KAMOKA

• Length [mm]: 47
• Number of connectors: 3
• Weight [kg]: 0.03
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Manufacturer: FAE

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of mounting bores: 1
• Pressure [Pa] from: 11,000
• Pressure [Pa] to: 307,000
• Voltage [V]: 5
• Resistor [Ohm]: 2,080
• Number of pins: 4
• Sensor Type: NTC Sensor
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PP009400291
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Fitting Depth [mm]: 28
• Weight [kg]: 0.022
• Manufacturer: ERA

• Number of pins: 4
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Manufacturer: FAE

• Emission Standard: Euro 4 (D4)
• Height [mm]: 27.6
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Resistor [Ohm]: 850
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 28
• Weight [kg]: 0.022
• Rated Voltage [V]: 12
• Housing Diameter [mm]: 20.7
• Manufacturer: ERA

• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 28
• for OE number: 1235268
• Manufacturer: MEAT & DORIA

• Guarantee: 5 years guarantee
• Manufacturer: HUCO

• Engine Code: 937 A4.000
• Emission Standard: Euro 4 (D4)
• Name: EP 1.953.388
• Manufacturer: EPS

• Fuel Mixture Formation: Common Rail (CR)
• Number of pins: 3
• Supplementary Article/Info 2: High Pressure Side
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV619

• Engine Code: 937 A4.000
• Emission Standard: Euro 4 (D4)
• Manufacturer: FACET

• Engine Code: 937 A4.000
• Number of pins: 4
• for OE number: 55 219 298
• Supplementary Article/Info 2: with seal ring
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Fuel Line (high pressure side)
• Fuel Mixture Formation: Direct Injection
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• Voltage [V]: 12
• Cable Length [mm]: 1,510
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV136

• Supplementary Article/Info 2: High Pressure Side
• Manufacturer: JPN

• Voltage [V]: 12
• Cable Length [mm]: 930
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Connector Shape: oval
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 35
• Cable Length [mm]: 930
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: NRF

Manufacturer: 3RG

Manufacturer: MAGNETI MARELLI

• Emission Standard: Euro 4 (D4)
• Manufacturer: JAPKO

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

Manufacturer: NRF KLIMATYZACJA

• Emission Standard: Euro 4 (D4)
• Housing Type: with housing
• Manufacturer: VDO

• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Fitting Depth [mm]: 22
• Manufacturer: ERA

• Length [mm]: 96
• Supplementary Article/Info 2: without integrated air temperature sensor
• Manufacturer: FAST

• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: NRF

• Engine Code: 937 A4.000
• Emission Standard: Euro 4 (D4)
• Required quantity: 1
• Housing Type: with housing
• Length [mm]: 96
• Inner Diameter [mm]: 70
• Outer Diameter [mm]: 70
• Name: EP 1.991.299
• Manufacturer: EPS

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Manufacturer: BOSCH OSPRZET SILNIK BENZYNOWY

• Engine Code: 937 A4.000
• Emission Standard: Euro 4 (D4)
• Required quantity: 1
• Housing Type: with housing
• Length [mm]: 96
• Inner Diameter [mm]: 70
• Outer Diameter [mm]: 70
• Manufacturer: FACET

• Emission Standard: Euro 3
• Required quantity: 1
• Mounting Type: Pipe-neck
• Number of pins: 5
• Suction pipe connector diameter [mm]: 70
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 8ET009142691
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• for OE number: 55 184 538
• Voltage [V]: 12
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Engine Code: 937 A4.000
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS10726-12B1

• Emission Standard: Euro 3
• Housing Type: with housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI

• Pistikkontaktide arv: 3
• Kütusesüsteemi seadmed: Common Rail
• Kvaliteet: OE EQUIVALENT
• OE-numbri jaoks: 504152959
• Manufacturer: MEAT & DORIA

• Number of pins: 5
• Manufacturer: KAVO

• Engine Code: 937 A4.000
• Fitting Position: before catalytic converter
• Cable Length [mm]: 650
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.413
• Manufacturer: EPS

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Fitting Position: before soot particulate filter
• Cable Length [mm]: 930
• Number of pins: 2
• Manufacturer: DELPHI

• Engine Code: 937 A4.000
• Fitting Position: before catalytic converter
• Cable Length [mm]: 650
• Conductor Number: 5
• Number of circuits: 5
• Manufacturer: FACET

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Korpusetüüp: koos korpusega
• valikuliselt:
• Pistikkontaktide arv: 4
• Välisläbimõõt 1 [mm]: 70
• Välisläbimõõt 2 [mm]: 70
• Manufacturer: ERA

Manufacturer: MAGNETI MARELLI

• Emission Standard: Euro 4 (D4)
• Housing Type: with housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: DE AF10403-12B1
• Manufacturer: DELPHI

• Emission Standard: Euro 4 (D4)
• alternatively:
• Housing Type: with housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: DE AF10399-12B1
• Manufacturer: DELPHI

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Overall Length [mm]: 625
• Manufacturer: BOSCH
• Name: BS 0281004821

• Emission Standard: Euro 4 (D4)
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 4
• Manufacturer: BREMI