• for OE number: 60 813 687
• Width [mm]: 33
• Height [mm]: 30
• Length [mm]: 58
• Guarantee: 3 years guarantee
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Construction Year from: 01.2002
• Number of pins: 4
• Socket colour: black
• Thread Size: M 12x1,5
• Spanner Size: 21
• for OE number: 46753479
• Manufacturer: MEAT&DORIA

• for OE number: 13 38 040
• Width [mm]: 33
• Height [mm]: 30
• Length [mm]: 58
• Guarantee: 3 years guarantee
• Number of pins: 2
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Fabrication Number: ECM-RE-002
• Manufacturer: NTY

• Fabrication Number: ECP-PL-011
• Manufacturer: NTY

• Engine Number to: 1415541
• Housing Colour: light blue
• Number of pins: 2
• Thread Size: M 12x1,5
• Manufacturer: FAE

• Thread Size: M12x1,5
• Colour Coding: black
• Manufacturer: MAGNETI MARELLI

• Engine Code: 937 A2.000
• Colour Coding: black
• Thread Size: M12x1,5
• Spanner Size: 21
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.830.286K, 1.880.115, 1.880.118, 1.880.122, 1.880.149, 1.880.189, 1.880.469, 1.880.563, 1.880.564, 1.880.565, 1.880.566, 1.880.567, 1.880.571, 1.880.573, 1.880.583, 1.880.676

• Engine Code: 937 A2.000
• Colour Coding: black
• Thread Size: M12x1,5
• Spanner Size: 21
• Manufacturer: FACET

for article number: 7.3286K, 7.8115, 7.8118, 7.8122, 7.8149, 7.8189, 7.8469, 7.8563, 7.8564, 7.8565, 7.8566, 7.8567, 7.8571, 7.8573, 7.8583, 7.8676

• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Pistikkontaktide arv: 3
• OE-numbri jaoks: 55219294
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for OE number: 46432103
• Sensor Type: Active sensor
• Manufacturer: KAMOKA
• Additional information: 108-014-375
• Lisainfo: 108-014-375

• Thread Size: M 12x1,5
• Number of pins: 4
• Housing Colour: black
• Manufacturer: FAE
• Additional information: FE33723
• Lisainfo: FE33723

• Tightening torque to [Nm]: 22
• Sensor Type: NTC Sensor
• Thread Size: M12x1,5
• Spanner Size: 19
• Colour Coding: blue
• Name: MM SPA103
• Manufacturer: MAGNETI MARELLI

• Voltage [V]: 12
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV245
• Manufacturer: ESEN SKV

• Voltage [V]: 12
• Number of pins: 3
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MAX

• Construction Year from: 01.2002
• Length [mm]: 770
• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Number from: 1415541
• Thread Size: M 12x1,5
• Number of pins: 3
• Housing Colour: grey
• Manufacturer: FAE

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.03
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV109

• Engine Code: 937 A2.000
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: with cable
• Voltage [V]: 12
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Construction Year from: 07.2001
• Connector Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 01.2002
• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor
• for OE number: 46481640
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MD

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV113

Manufacturer: FAST

• Construction Year from: 01.2002
• Number of pins: 3
• Manufacturer: DELLO AUTOMEGA

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Cable Length [mm]: 680
• Manufacturer: NRF

• Number of pins: 3
• Pressure from [kPA]: 20
• Pressure to [kPA]: 256
• Quality: OE EQUIVALENT
• for OE number: 55206796
• Manufacturer: MEAT & DORIA

• Construction Year to: 01.2005
• Engine Code: 937A2.000
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: with cable
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Engine Code: 937 A2.000
• Number of pins: 3
• Manufacturer: JPN

• Supplementary Article/Info 2: with cable
• Length [mm]: 770
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Keermemõõt: M18X1,5
• Kütusesüsteemi seadmed: Common Rail
• Surve (bar) kuni: 1 500
• Seerianumber: EFP-FT-002
• Manufacturer: NTY
• Name: NTY EFP-FT-002

• Housing Type: with housing
• Transmission Type: Manual Transmission
• Fabrication Number: EPP-AR-003
• Manufacturer: NTY

• Engine Code: 937 A2.000
• Sensor Type: Piezoelectric Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY

• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA OPEL CORSA 1,3CDTI 03-
• Manufacturer: BRM

• Length [mm]: 720
• Alternatively:
• Number of pins: 3
• Housing Colour: black
• Weight [kg]: 0.068
• Alternative Repair Kit: 550057
• Manufacturer: ERA

• Engine Code: 937 A2.000
• Length [mm]: 720
• Manufacturer: FACET

• Kütusesüsteemi seadmed: Common Rail
• Piirangutega toode/piirangu info 2: Kõrgsurvekülg
• Seerianumber: EFP-BM-000
• Manufacturer: NTY
• Name: NTY EFP-BM-000

• Engine Code: 937 A2.000
• Pressure from [kPA]: 20
• Pressure to [kPA]: 256
• Output Voltage, from [V]: 0.386
• Output Voltage, up to [V]: 4.75
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Engine Code: 937 A2.000
• Pressure from [kPA]: 20
• Pressure to [kPA]: 256
• Output Voltage, from [V]: 0.386
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Engine Number from: 2705194
• Number of pins: 3
• Pressure from [kPA]: 27
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: DLP

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Manufacturer: BREMI

• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Number of pins: 3
• Pressure from [kPA]: 20
• Pressure to [kPA]: 256
• for OE number: 55219294
• Manufacturer: MEAT&DORIA

• Length [mm]: 755
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Fabrication Number: EFP-FT-003
• Manufacturer: NTY
• Name: NTY EFP-FT-003

• Engine Code: 937 A2.000
• Length [mm]: 720
• Manufacturer: EPS

• Number of pins: 5
• for OE number: 46541253
• Housing Type: with housing
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Quality class: PJ
• Name: Air flow sensor

• Voltage [V]: 12
• Number of pins: 5
• Housing Type: with housing
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Manufacturer Restriction: Citroen, Fiat, Opel, Peugeot
• Number of pins: 4
• Cable Length [mm]: 200
• Cable Cross Section [mm²]: 0.75
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, lambda andur
• Manufacturer: HBE

for OE number: 0 261 230 218, 0 281 002 205, 0 281 002 215, 0 281 002 468, 0 281 002 709, 0 281 002 999, 0 281 006 028

Manufacturer: AUTO-GH

• Supplementary Article/Info 2: High Pressure Side
• Number of pins: 3
• for OE number: 580 147 451 2
• Fuel Mixture Formation: Common Rail (CR)
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS
• Lisainfo: ABA120-08-192
• Additional information: ABA120-08-192

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: 937 A2.000
• Construction Year from: 07.2001
• Block Separation:
• Number of connectors: 3
• Colour: black
• Operating Mode: Electric
• Weight [kg]: 0.019
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 770
• Number of connectors: 3
• Cable Length [mm]: 720
• Weight [kg]: 0.07
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Pressure from [kPA]: 20
• Pressure to [kPA]: 250
• Colour: black
• Manufacturer: VDO

• Construction Year from: 01.2002
• Number of pins: 3
• Version: IAM
• Manufacturer: METZGER

• Number of mounting bores: 2
• Cable Length 1 [mm]: 680
• Rated Voltage [V]: 12
• Number of connectors: 3
• Operating temperature from [°C]: -40
• Operating temperature to [°C]: 125
• Sensor Type: Hall Sensor
• Connector Shape: rectangular
• Colour: black
• Name: SN CMP176.01
• Manufacturer: SNR

• Engine Code: 937 A2.000
• Construction Year from: 07.2001
• Block Separation:
• Number of connectors: 3
• Colour: black
• Operating Mode: Electric
• Weight [kg]: 0.019
• Supplementary Article/Info 2: with seal ring
• Name: SW 70 10 2325
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fuel Mixture Formation: Common Rail (CR)
• Fabrication Number: EFP-FT-004
• Manufacturer: NTY
• Name: NTY EFP-FT-004

• Guarantee: 5 years guarantee
• Name: Andur,ohuvotu rohk
• Manufacturer: HUC

Supplementary Article/Info 2: Article Number is to be determined by diagnostics tester

• Fabrication Number: EPP-VV-006
• Manufacturer: NTY

• Construction Year from: 01.2002
• Length [mm]: 770
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: with cable
• Manufacturer: FAE

• Colour: black
• Number of pins: 3
• Pressure from [kPA]: 20
• Pressure to [kPA]: 250
• Manufacturer: FAE

• Number of pins: 3
• Connector Shape: oval
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 770
• Number of connectors: 3
• Cable Length [mm]: 720
• Weight [kg]: 0.07
• Name: SW 70 92 8386
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• for OE number: 2373100Q0C
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Housing Type: with housing
• Number of pins: 5
• Lisainfo: Air Mass Sensor
• Additional information: Air Mass Sensor

• Construction Year to: 01.2004
• Fuel Mixture Formation: Direct Injection, Common Rail (CR)
• Engine Number to: 3928481, 3940874
• Block Separation:
• Supplementary Article/Info 2: High Pressure Side
• Name: ANDUR,KšTUSEROHK
• Manufacturer: MAX

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles

• Number of pins: 3
• Pressure [Pa] from: 20,000
• Pressure [Pa] to: 256,000
• Manufacturer: METZGER

• Supplementary Article/Info 2: High Pressure Side
• Number of pins: 3
• for OE number: 504229208
• Fuel Mixture Formation: Common Rail (CR)
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 5
• Voltage [V]: 12
• Name: OHUMASSIMOOTJA
• Manufacturer: MAX

• Construction Year from: 02.2004
• Engine Number from: 3928482
• Fuel Mixture Formation: Common Rail (CR)
• Number of pins: 3
• Supplementary Article/Info 2: High Pressure Side
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV625

• Engine Code: 937 A2.000
• Voltage [V]: 12
• Name: OHUMASSIMOOTJA
• Manufacturer: MAX

• Construction Year from: 02.2004
• Engine Number from: 3928482
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Name: Andur,ktuserohk
• Manufacturer: MAG
• Lisainfo: APS136
• Additional information: APS136

• Fuel Mixture Formation: Common Rail (CR)
• Number of pins: 3
• Supplementary Article/Info 2: High Pressure Side
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV619

Manufacturer: NRF

• Number of pins: 3
• Mounting Type: Bolted
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 6PP009400111

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Name: Andur,ktuserohk
• Manufacturer: MAG
• Lisainfo: APS132
• Additional information: APS132

• Construction Year from: 01.2002
• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.25
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV078

• Fuel Mixture Formation: Common Rail (CR)
• Supplementary Article/Info 2: High Pressure Side
• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV618

• Construction Year from: 02.2004
• Number of pins: 3
• Manufacturer: JPN

• Construction Year from: 02.2004
• Engine Number from: 3928482
• Kütusesüsteemi seadmed: Common Rail
• Piirangutega toode/piirangu info 2: Kõrgsurvekülg
• Keermemõõt: M18X1,5
• Name: Andur,ktuserohk
• Manufacturer: MAX

• Thread Size: M 18
• Thread Pitch [mm]: 1.5
• Number of pins: 3
• Spanner Size: 27
• Socket colour: black
• Connector Shape: oval
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.