• Pressure [bar]: 5.5
• Housing Colour: black
• Thread Size: M14x1.5-6g
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Number of pins: 1
• Colour: black
• Pressure from [bar]: 0.3
• Thread Size: M14X1,5
• Spanner Size: 24
• Manufacturer: MEAT&DORIA

• Switch Pressure [bar]: 0.5
• Thread Size: M14x1.5
• Sensor Type: Closed-type Sensor
• Name: OLISURVELšLITUS
• Manufacturer: VER

• for OE number: 94580175
• Rotation Direction: Clockwise rotation
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Number of mounting bores: 2
• Fabrication Number: ECP-PL-015
• Manufacturer: NTY

• Number of pins: 2
• Weight [kg]: 0.01
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV687

• Construction Year to: 05.1999
• Colour Coding: green
• Thread Size: M 12x1,5
• Spanner Size: 19
• Connector Shape: oval
• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• for OE number: 15326388
• Manufacturer: DELLO AUTOMEGA

• Engine Code: Z20L
• Thread Size: M14x1,5
• Control Range [bar]: 0,3 - 0,55
• Weight [kg]: 0.049
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M 14x1,5
• Housing Colour: black
• Manufacturer: FAE
• Additional information: 12430 FAE
• Lisainfo: 12430 FAE

• Rotation Direction: Clockwise rotation
• Number of pins: 3
• Weight [kg]: 0.022
• Manufacturer: ERA

• Pressure [bar]: 0.4
• Thread Size: M14 x 1,5
• Number of pins: 1
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Engine Code: X20SED
• Name: Olisurvellitus
• Manufacturer: JPA

• Thread Size: M14 x 1,5
• Spanner Size: 24
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring
• Pressure [bar]: 0.42
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Cable Length [mm]: 22
• Number of pins: 1
• Connecting thread: 1/8'' x 27 NPT
• Manufacturer: ERA

• Fitting Position: Right
• Thread Size: M12x1.5
• Manufacturer: VERNET

• Thread Size: M12 x 1,5
• Number of pins: 2
• Manufacturer: ERA

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 21
• Thread Size: M12x1.5
• for OE number: 90411977
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

Manufacturer: FAE

• Alternatively:
• Number of pins: 2
• Housing Colour: black
• Alternative Repair Kit: 550718
• Manufacturer: ERA

• Fitting Position: Left
• Thread Size: 1/8x27 NPTF
• Manufacturer: VERNET

• Fitting Position: Left
• Connector Shape: round
• Material: Brass
• Number of pins: 1
• Plug Type: Male
• Sensor Type: NTC Sensor
• Spanner Size: 13 mm
• Thread Size: 1/8"x27
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Fitting Position: Right
• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 55199579
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Cable Length [mm]: 840
• Sensor Type: Passive sensor
• for OE number: 8-10456-515-0
• Manufacturer: KAMOKA

Manufacturer: MAGNETI MARELLI

• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Engine Code: X 20 SED
• Sensor Type: NTC Sensor
• Thread Size: 1/8"X27 NPTF
• Number of pins: 1
• Thread Type: with tapered thread
• Manufacturer: MEYLE

• Number of pins: 3
• Fabrication Number: ESS-CH-001

• Cable Length [mm]: 236
• Fabrication Number: ESS-PL-000
• Manufacturer: NTY

• Engine Code: X 20 SED
• Construction Year from: 09.1997
• Number of pins: 3
• Rotation Direction: Clockwise rotation
• Number of mounting bores: 2
• Supplementary Article/Info 2: without cable
• for OE number: 94580175
• Name: Andur,drosselklapiasend
• Manufacturer: MD

• for OE number: 1235547, 96418393
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: rectangular
• Fabrication Number: ECP-DW-001
• Manufacturer: NTY

Manufacturer: DELLO AUTOMEGA

• Fabrication Number: ECP-CH-026
• Manufacturer: NTY

• Fitting Position: Right
• Housing Colour: black
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Construction Year from: 12.2000
• Construction Year to: 12.2004
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.05
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Cable Length [mm]: 325
• Alternatively:
• Number of pins: 3
• Alternative Repair Kit: 550284
• Manufacturer: ERA

• Engine Code: X 20 SED
• Number of pins: 3
• Connector Shape: rectangular
• Colour: grey
• Cable Length [mm]: 325
• Manufacturer: MEAT&DORIA

• Fitting Position: Right
• Mounting Type: Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 2,700, 311
• Supplementary Article/Supplementary Info: with seal
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: M12x1,5
• Colour: black
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: black
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: X 20 SED
• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Pressure from [bar]: 0.1
• Pressure to [bar]: 1.17
• Colour: black
• Number of pins: 2
• Manufacturer: MEYLE

• Number of pins: 1
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Number of pins: 2
• Connector Shape: oval
• Cable Length [mm]: 400
• for OE number: 10456240
• Manufacturer: MEAT&DORIA

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Manufacturer: BREMI

• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: VER

• Alternatively:
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Connector Shape: rectangular
• Alternative Repair Kit: 550405
• Manufacturer: ERA

Manufacturer: MAGNETI MARELLI

• for OE number: 08 25 484
• Weight [kg]: 0.025
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 180
• Cable Length [mm]: 460
• Fabrication Number: ESL-PL-012
• Manufacturer: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased

• Alternatively:
• Number of pins: 3
• Housing Colour: black
• Connector Shape: rectangular
• Number of mounting bores: 1
• Alternative Repair Kit: 550153
• Resistor M[ohm]: 1.8
• Manufacturer: ERA

• Cable Length [mm]: 920
• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

• Construction Year from: 09.1997
• Construction Year to: 06.2003
• Engine Code: DTEC20,X20SED
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 550
• Weight [kg]: 0.11
• Name: ANDUR, VŽNTVOLL
• Manufacturer: VAL

• Lambda Sensor: Regulating Probe, Finger probe, Unheated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 320
• Manufacturer: DELPHI

• Construction Year from: 09.1997
• Construction Year to: 05.1999
• Engine Code: DTEC20
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.05
• Manufacturer: VALEO
• Name: VA 253836

• Lambda Sensor: Unheated
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: with cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Length [mm]: 413
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PG013114431
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Chemical Properties: Oil resistant
• Number of pins: 1
• Cable Length [mm]: 80
• Cable Cross Section [mm²]: 1
• Contact surface: Tin-plated
• Supplementary Article/Info 2: with copper casing, with protection hose
• Supplementary Article/Supplementary Info: with cable tie
• Temperature range from [°C]: -25
• Temperature range to [°C]: +125
• SVHC: No SVHC present!
• Name: šhenduskaabel, olisurvelliti
• Manufacturer: HBE

Manufacturer Restriction: Opel, Fiat, Peugeot, Alfa Romeo, Lancia, Suzuki, Ford, Citroen

• Vehicle Identification Number (VIN) to: 642920
• Lambda Sensor: Unheated, Regulating Probe
• Number of pins: 1
• Fitting Position: Exhaust Manifold
• for article number: 81000
• Manufacturer: MEAT&DORIA

• Construction Year from: 12.2000
• Construction Year to: 12.2004
• Engine Code: X 20 SED
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Exhaust System: before catalytic converter
• Construction Year from: 09.1997
• Construction Year to: 06.2003
• Lambda Sensor: Regulating Probe
• Length [mm]: 460
• Number of connectors: 1
• Manufacturer: VERNET

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Length [mm]: 370
• Number of circuits: 1
• Conductor Number: 1
• Cable Length [mm]: 370
• Lambda Sensor: Unheated
• Name: MM OSM005
• Manufacturer: MAGNETI MARELLI

• Cable Length [mm]: 330
• Conductor Number: 1
• Lambda Sensor: Regulating Probe
• Manufacturer: JAPKO

• Lambda Sensor: Unheated
• Length [mm]: 360
• Number of pins: 1
• Technical Information Number: Universal 77001
• Manufacturer: FAE

• Voltage [V]: 12
• Length [mm]: 930
• Number of pins: 3
• Weight [kg]: 0.11
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Vehicle Identification Number (VIN) to: 642920
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 300
• Number of pins: 1
• Weight [g]: 74
• Gross Weight [g]: 118
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Unheated, Finger probe, Lambda Sensor

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.13
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Vehicle Identification Number (VIN) from: 642921
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 2
• Weight [g]: 88
• Gross Weight [g]: 132
• Manufacturer: DENSO
• Name: DN DOX-0123

Lambda Sensor: Regulating Probe, Unheated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
LANCER IV SEDAN (C6/
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
LANCER IV SEDAN (C6/
(kvaliteediklass: Q)"

• Cable Length [mm]: 1,000
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Manufacturer: FAE

• Construction Year to: 09.1999
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 2
• Overall Length [mm]: 347
• Available as universal article as well, see article no.: F00HL00091
• Recommended change interval [km]: 50,000
• Manufacturer: BOSCH