• Engine Code: G4EE
• Pressure [bar]: 0.4
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Engine Code: G4EE
• Pressure [bar]: 0.4
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Manufacturer: FACET

• Engine Code: G4EE
• Pressure [bar]: 0.4
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: KAVO

• Engine Code: G4EE
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Pressure [bar]: 0.3
• Name: OLISURVELšLITUS
• Manufacturer: MAX

• Switch Pressure [bar]: 0.3
• Thread Size: 1/8x28 BSPT
• Sensor Type: Closed-type Sensor
• Name: OLISURVELšLITUS
• Manufacturer: VER

• Spanner Size: 19
• Housing Colour: black
• Manufacturer: KAMOKA

• Pressure [bar]: 0.3
• Housing Colour: black
• Thread Size: 1/8
• Spanner Size: 24
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Pressure [bar]: 0.3
• Thread Size: 1/8 GAS
• Spanner Size: 27
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Colour: black
• Number of pins: 3
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: MAX

• Thread Size: 3/8x18 NPT
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 3
• Socket colour: black
• Spanner Size: 19
• Thread Size: 3/8
• for OE number: 3922038020
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Number of pins: 1
• Switch pressure from [bar]: 0.2
• Switch pressure to [bar]: 0.4
• Thread Size: 1/8" BSPT
• Colour: black
• Supplementary Article/Supplementary Info: without gaskets/seals
• Manufacturer: METZGER

• Construction Year to: 09.2011
• Manufacturer: BOSCH

• Cable Length [mm]: 140
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Connector Shape: rectangular
• Fabrication Number: ECP-HY-003
• Manufacturer: NTY

• Number of connectors: 3
• Colour: black
• Weight [kg]: 0.05
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 04.2005
• Name: Andur, v„ntvoll
• Manufacturer: MAG

• for OE number: 06A 905 161 B
• Sensor Type: Active sensor
• Manufacturer: KAMOKA

Manufacturer: ASHIKA

• Spanner Size: 19 mm
• Number of pins: 3
• Connecting thread: 3/8'' x 18 NPTF
• Manufacturer: ERA

• Thread Size: 3/8x18 NPTF
• Number of pins: 3
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Cable Length [mm]: 240
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for OE number: 39350-26900
• Fabrication Number: ECP-KA-009
• Manufacturer: NTY

• Engine Code: G4EE
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Connector Shape: angled
• Manufacturer: JAPKO

• Cable Length [mm]: 165
• for OE number: 39180-22600
• Number of pins: 2
• Name: Andur, v„ntvoll
• Manufacturer: MAX

• Engine Code: G4EE
• Thread Size: 3/8 GAS
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: G4EE
• Thread Size: 3/8 GAS
• Spanner Size: 19
• Manufacturer: FACET

• Fabrication Number: ESS-HY-502
• Manufacturer: NTY

• Number of pins: 3
• Fitting Depth [mm]: 28.2
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Number of pins: 2
• Connector Shape: rectangular
• Cable Length [mm]: 140
• Sensor Type: Inductive Sensor
• for OE number: 3918022600
• Name: Andur, v„ntvoll
• Manufacturer: MD

• Engine Code: G4EE
• Voltage [V]: 12
• Length [mm]: 150
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.09
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV303
• Manufacturer: ESEN SKV

Manufacturer: MAGNETI MARELLI

Manufacturer: NRF

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Manufacturer: BREMI

• Resistor [Ohm]: 870
• Cable Length [mm]: 170
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 24
• Weight [kg]: 0.05
• Alternative Repair Kit: 550168
• Manufacturer: ERA

• Cable Length [mm]: 190
• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

• Number of connectors: 2
• Cable Length [mm]: 165
• Weight [kg]: 0.09
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 2
• Cable Length [mm]: 165
• Weight [kg]: 0.09
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 2
• Cable Length [mm]: 165
• Weight [kg]: 0.09
• Name: SW 90 10 8166
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: OYODO

• Number of pins: 3
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Number of mounting bores: 1
• Sensor Type: Hall Sensor
• Fitting Depth [mm]: 28
• for OE number: 3935026900
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Mounting Type: mounting
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PT009309621
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• Cable Length [mm]: 175
• Fitting Depth [mm]: 24
• Name: ANDUR, VŽNTVOLL
• Manufacturer: TRI

• for OE number: 93840-2E010
• Number of pins: 2
• Fitting Position: Footwell
• Supplementary Article/Info 2: with cable
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 09.2011
• Name: Detonatsiooniandur
• Manufacturer: BOS

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: DLP

• Height [mm]: 28
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Resistor [Ohm]: 900
• Fitting Depth [mm]: 24
• Cable Length [mm]: 240
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PU009167011
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Length [mm]: 375
• Fabrication Number: ESL-HY-504
• Manufacturer: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Oxygen Sensor: Diagnostic Probe, Regulating Sensor, Thread pre-greased

• Engine Code: G4EE
• Length [mm]: 240
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Engine Code: G4EE
• Length [mm]: 240
• Manufacturer: FACET

• Number of pins: 2
• Manufacturer: FAE

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Engine Code: G4EE
• Number of pins: 3
• Fitting Depth [mm]: 28
• Manufacturer: ERA

• Number of connectors: 3
• Manufacturer: OYODO

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Number of pins: 3
• Fitting Depth [mm]: 28.2
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Engine Code: G4EE
• Length [mm]: 250
• Supplementary Article/Info 2: without fastening clamp
• Manufacturer: FACET

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO

• Number of pins: 2
• Length [mm]: 210
• Resistor [Ohm]: 900
• Cable Length [mm]: 215
• Sensor Type: Inductive Sensor
• Number of connectors: 2
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 24
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV909
• Manufacturer: ESEN SKV

• Cable Length [mm]: 220
• Number of pins: 2
• Name: DE AS10226
• Manufacturer: DELPHI

• Construction Year to: 09.2011
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Finger-type Sensor Fitting Position: before catalytic converter, after catalytic converter

• Oxygen Sensor: Diagnostic Probe, Regulating Sensor
• Length [mm]: 375
• Number of connectors: 4
• Manufacturer: VERNET

• Number of pins: 3
• Connector Shape: rectangular
• Number of mounting bores: 2
• Rotation Direction: Clockwise rotation
• Supplementary Article/Info 2: without cable
• for OE number: 3517026900
• Manufacturer: MEAT & DORIA

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 900
• Name: ANDUR, VŽNTVOLL
• Manufacturer: VAL

• Fitting Position: Front
• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Emission Standard: Euro 3 (D3), Euro 4 (D4)
• Exhaust System: before catalytic converter
• Quantity: 1
• Cable Length [mm]: 400
• Name: DE ES21157-12B1
• Manufacturer: DELPHI

• Number of pins: 2
• Manufacturer: FAE

• Resistor [Ohm]: 9
• Length [mm]: 375
• Number of circuits: 4
• Conductor Number: 4
• Cable Length [mm]: 375
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Engine Code: G4EE
• Oxygen Sensor: Regulating Sensor, Planar Sensor
• Number of pins: 4
• Cable Length [mm]: 300
• for OE number: 0258986627
• Manufacturer: MEAT&DORIA

• Fitting Position: Exhaust Manifold
• Oxygen Sensor: Switching-type Oxygen Sensor
• Cable Length [mm]: 280
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570021
• Manufacturer: ERA

• Oxygen Sensor: Heated
• Voltage [V]: 12
• Length [mm]: 385
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV

• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Construction Year to: 09.2011
• Oxygen Sensor: Regulating Sensor, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year to: 09.2011
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 377
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Catalytic Converter Type: with three-way catalytic converter
• Exhaust System: for pre-catalytic converter
• Fitting Position: after catalytic converter
• Cable Length [mm]: 384
• Oxygen Sensor: Planar Sensor, Heated
• Manufacturer: DELPHI
• Name: DE ES20158-12B1

• Oxygen Sensor: Regulating Sensor, Heated
• Fitting Position: before catalytic converter
• Construction Year to: 09.2011
• Length [mm]: 420
• Number of pins: 4
• Technical Information Number: Universal 77005
• Manufacturer: FAE

• Oxygen Sensor: Regulating Sensor, Heated
• Fitting Position: before catalytic converter
• Vehicle type: Rio
• Cable Length [mm]: 420
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PA358066271
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: G4EE
• Construction Year from: 06.2005
• Oxygen Sensor: Diagnostic Probe, Regulating Sensor
• Block Separation:
• Length [mm]: 375
• Number of circuits: 4
• Manufacturer: VDO

Fitting Position: after catalytic converter, before catalytic converter

• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 375
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: 3921022610
• Quality: OE
• Weight [g]: 133
• Gross Weight [g]: 166
• Manufacturer: DENSO
• Name: DN DOX-2059

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor

• Construction Year from: 06.2005
• Construction Year to: 09.2011
• Oxygen Sensor: Planar Sensor, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 400
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: rectangular
• Name: VA 368030
• Manufacturer: VALEO

Fitting Position: before catalytic converter, after catalytic converter