Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
ACEA specification: A3/
B4, E7, E2 -
API specification: CI-
4/ SL - Capacity [litre]: 1
-
SAE viscosity class: 15W-
40 - Weight [kg]: 0.885
- Observe service information:
- Manufacturer: FEBI
Specification: Mack EO-M PLUS, Cummins CES 20076, Deutz DQC-III, CAT ECF-1-a/ECF-2, MTU Type 2, MB 229.1, MAN 3275, Renault RLD-2, VW 501 01/505 00, MB 228.3, VW 501 01, VW 505 00, Cummins CES 20077, Cummins CES 20078, DTFR 15B110 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
API specification: CF,
SL -
ACEA specification: A3/
B4 - Chemical Properties: Synthetic
- Packing Type: Bottle
- Capacity [litre]: 1
- Recommended change interval [years]: 1
- Observe the vehicle manufacturer specifications:
- Observe system fill quantity:
-
SAE viscosity class: 0W-
30 - Width [mm]: 115
- Height [mm]: 225
- Weight [kg]: 0.91
- Length [mm]: 60
- Manufacturer: VAICO
Oil - manufacturer recommendation: BMW Longlife-01, MB 229.5, MB 229.3, GM-LL-A-025, GM-LL-B-025, RN 0700, RN 0710, VCC 95200356, VW 502 00, VW 505 00 General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
ACEA specification: A3/
B4, E7, E2 -
API specification: CI-
4/ SL - Capacity [litre]: 5
-
SAE viscosity class: 15W-
40 - Weight [kg]: 4.425
- Observe service information:
- Manufacturer: FEBI BILSTEIN
Specification: Mack EO-M PLUS, Cummins CES 20076, Deutz DQC-III, CAT ECF-1-a/ECF-2, MTU Type 2, MB 229.1, MAN 3275, Renault RLD-2, VW 501 01/505 00, MB 228.3, VW 501 01, VW 505 00, Cummins CES 20077, Cummins CES 20078, DTFR 15B110 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
ACEA specification: A3/
B4, A3/ B3 -
API specification: SL,
CF - Recommended change interval [years]: 1
- Capacity [litre]: 5
- Observe the vehicle manufacturer specifications:
- Packing Type: Canister
- Observe system fill quantity:
-
SAE viscosity class: 10W-
40 - Width [mm]: 115
- Height [mm]: 230
- Length [mm]: 300
- Weight [kg]: 4.6
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
ACEA specification: A3/
B4, A3/ B3 -
API specification: CF,
SL - Packing Type: Canister
- Chemical Properties: Synthetic
- Recommended change interval [years]: 1
- Capacity [litre]: 5
- Observe the vehicle manufacturer specifications:
- Observe system fill quantity:
-
SAE viscosity class: 0W-
30 - Width [mm]: 261
- Height [mm]: 111
- Length [mm]: 566
- Weight [kg]: 4.654
- Manufacturer: VAICO
Oil - manufacturer recommendation: BMW Longlife-01, MB 229.5, MB 229.3, GM-LL-A-025, GM-LL-B-025, RN 0700, RN 0710, VCC 95200356, VW 502 00, VW 505 00 General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fill quantity [l]: 3.4
- Oil: Full Synthetic Oil
-
SAE viscosity class: 5W-
30
Specification: API SN/CF, MB 229.3, MB 229.5, Renault RN0700, Renault RN0710, VW 502.00, VW 505.00
- Fill quantity [l]: 3.4
- Oil: Mineral Oil
- Oil - manufacturer recommendation: Volvo VDS
Specification: ACEA A2/B2, ACEA B3, ACEA E2, Allison C-4, API CF, API SJ/CG-4, Mack EO/L, MAN 271, MB 228.1, MTU type 2, Volvo VDS, VW 501.01, VW 505.00 (97)
- Fill quantity [l]: 3.4
-
Specification: API SF/
CD -
SAE viscosity class: 10W-
30 -
Oil - manufacturer recommendation: MIL-
L- 46152C
- Fill quantity [l]: 3.4
- Oil: Mineral Oil
- SAE viscosity class: 30
Specification: API SG/CF/CF-2, Deutz DQC I-02, MAN 270, MAN 271, MB 228.0, MB 228.1
- Fill quantity [l]: 3.4
- Oil: Mineral Oil
- SAE viscosity class: 30
Specification: API CF-4, API SF/CF, CCMC G2/D1, Deutz DQC I-02, MAN 271, MB 228.1, MIL-L-2104B, MIL-L-46152B
- Fill quantity [l]: 3.4
-
Specification: API SF/
CD, CCMC G2/ D1 -
Oil - manufacturer recommendation: CCMC G2/
D1