• Housing Type: with housing
• Fabrication Number: EPP-BM-006
• Manufacturer: NTY

• Fabrication Number: ECP-AR-013
• Manufacturer: NTY

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Number of pins: 1
• Spanner Size: 12
• Thread Size: 1/8
• for OE number: 4671065
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Fabrication Number: ECT-HY-002
• Manufacturer: NTY
• Name: NTY ECT-HY-002

• Thread Size: 1/8 GAS
• Spanner Size: 13
• Number of pins: 1
• Manufacturer: ERA

• Thread Size: 1/8 x 28 BSP
• Manufacturer: FAE

• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Connector Shape: rectangular
• Socket colour: black
• Manufacturer: ERA

• Thread Size: M14x1,5 mm
• Alternatively:
• Number of pins: 2
• Alternative Repair Kit: 550719
• Manufacturer: ERA

• Operating voltage [V]: 12
• Sensor Type: Slider
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Manufacturer: JP GROUP
• Lisainfo: Switch for throttle valve
• Additional information: Switch for throttle valve

• Fabrication Number: ECP-PL-003
• Manufacturer: NTY

• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: grey, blue, black
• Fabrication Number: ECP-PL-007
• Manufacturer: NTY

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 5226504
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 3
• Socket colour: black
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 10083510
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Fabrication Number: ECP-PL-043
• Number of pins: 3
• Manufacturer: NTY

• Number of pins: 3
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thread Size: M12x1.5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Construction Year from: 07.2001
• Number of pins: 3
• Connector Shape: rectangular
• Socket colour: brown
• Thread Size: M12x1,5
• Spanner Size: 19
• for OE number: 39220-2X100, 0K50F-18840
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Operating Mode: Mechanical
• Manufacturer: DELPHI
• Name: DE SS10992-12B1

• Number of pins: 2
• Housing Colour: white
• Supplementary Article/Info 2: with seal ring
• Thread Size: M12 x 1,5
• Weight [kg]: 0.03
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M 12x1,5
• Number of pins: 2
• Housing Colour: white
• Manufacturer: FAE

• Number of pins: 2
• Voltage [V]: 12
• Thread Size: M 14x1,5
• Housing Colour: black
• Manufacturer: FAE

• Number of connectors: 3
• Manufacturer: VERNET

• Weight [kg]: 0.03
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Thread Size: M 14x1,5
• Spanner Size: 21
• Manufacturer: METZGER

• Fitting Position: Front Axle both sides
• Manufacturer: JAPKO

• Construction Year from: 07.2001
• Number of connectors: 3
• Weight [kg]: 0.04
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Fitting Depth [mm]: 27.9
• Cable Length [mm]: 1,360
• Braking/Drive Dynamics: for vehicles with ABS
• Fabrication Number: HCA-KA-316
• Manufacturer: NTY

Manufacturer: MEAT&DORIA

• Vehicle type: Carnival, Sedona
• Quantity: 2
• Block Separation:
• Fitting Position: Front Axle
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Fitting Position: Front Axle
• Construction Year from: 06.2000
• Cable Length [mm]: 1,361
• Sensor Type: Passive sensor
• Manufacturer: OPTIMAL ZAWIESZENIE

Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-KA-308
• Manufacturer: NTY

• Fitting Position: Front Axle both sides
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: JPA

• Number of pins: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-KA-311

• Number of pins: 2
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Sensor Type: Inductive Sensor
• Fitting Depth [mm]: 28
• Vehicle Equipment: for vehicles with automatic transmission
• Fitting Position: Inlet
• Manufacturer: MEAT&DORIA

• Length [mm]: 220
• Number of pins: 3
• Fitting Depth [mm]: 28.5
• Manufacturer: ERA

• Engine Code: KRV6
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Weight [kg]: 0.07
• Name: ANDUR, VŽNTVOLL
• Manufacturer: VAL

• Fitting Position: Rear Axle both sides
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: JPA

• Cable Length [mm]: 540
• Lambda Sensor: Regulating Probe
• Manufacturer: JAPKO

• Cable Length [mm]: 195
• Number of pins: 3
• Supplementary Article/Info 2: for crankshaft
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 24
• Connector Shape: rectangular
• Weight [kg]: 0.048
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle type: Carnival
• Construction Year to: 06.2001
• Required quantity: 1
• Number of pins: 3
• Suction pipe connector diameter [mm]: 80
• Quality class: PJ
• Name: Air flow sensor

• Construction Year from: 06.2000
• for model code: Carnival, Sedona
• Fitting Position: Front Axle
• Required quantity: 2
• Block Separation:
• Cable Length [mm]: 1,370
• Fitting Depth [mm]: 27.9
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Slider
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Housing Type: with housing
• Number of pins: 3
• Housing material: Plastic
• Name: OHUMASSIMOOTJA
• Manufacturer: MAX

• Name: OHUMASSIMOOTJA
• Manufacturer: MAG

• Construction Year to: 07.2001
• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 3
• Weight [kg]: 0.2
• Operating Mode: Electric
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Name: CE 07SKV117
• Manufacturer: ESEN SKV

• Construction Year from: 09.1999
• Quantity: 2
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 07.2001
• for article number: 86033
• Number of pins: 3
• Manufacturer: MEAT&DORIA

• Construction Year to: 06.2001
• Required quantity: 1
• Vehicle type: Carnival
• Mounting Type: Pipe-neck
• Number of pins: 3
• Suction pipe connector diameter [mm]: 80
• Assy./disassy. by qualified personnel required!:
• Name: OHUMASSIMOOTJA
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Operating Mode: Electric
• Name: OHUMASSIMOOTJA
• Manufacturer: MAG

• Construction Year to: 07.2001
• Engine Code: KRV6
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 570
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.151
• Manufacturer: VALEO

Fitting Position: before catalytic converter, after catalytic converter

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM

• Housing Type: with housing
• Number of pins: 3
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI

• Engine Code: KRV6
• Number of pins: 3
• Connector Shape: rectangular
• Sensor Type: Hot-wire Sensor
• Voltage [V]: 12
• Length [mm]: 108
• Width [mm]: 125
• Height [mm]: 108
• Weight [kg]: 0.2
• Manufacturer: VALEO